Calculation algorithm development of pulling ability of drivegear and conveyor belt tensioners
DOI:
https://doi.org/10.15587/2312-8372.2014.28089Keywords:
conveyor, parameters, tractive factor, standard, specifications, algorithm, softwareAbstract
The article is devoted to development an algorithm and software for automated calculation of the conveyor tractive factor value. The basis is known calculation method, it is discussed various variants of conveyor - single and double-drum, with clamping roller or tape, hard kinematical or independent connection between drums. It is formalized the second stage of automated design problem of mining conveyors, using known methods approved by Standard.
A visual form for user interface based on example of basic parameters of the mine conveyor that was created in the Visual Basic for Application programming language. Visual Basic for Application programming language, built-in MS Office package, is used for automate the calculation of these conveyor parameters, the visual form of algorithm realization calculating of the traction drive capacity conveyor drive gear pulling ability is developed.
Depending on the number of drums, used in the conveyor, it is chosen the mode and type of drive. For single-drum drive gear is chosen the classic drive gear: with clamping roller or clamping tape. For double-drum drive gear is chosen the drive gear type: with hard kinematical or independent connection between drums.
References
Konveyery lentochnye shahtnye. Metodika rascheta. (1980). M.: MUP SSSR, 72.
Osnovnye polozhennia po proektirovaniiu i iekspluatatsii ugol'nyh shaht. (1975). M.: IGD im. A. Skochinskogo, 268.
Opredelenie tiagovyh parametrov podzemnyh lentochnyh konveyerov s primeneniem YeTsVM. (1982). Donetsk: Dongiprouglemash, 54.
Ovsiannikov, Yu. A., Korablev, A. A. (1986). Avtomatizatsiia podzemnogo oborudovaniia. M.: Nedra, 287.
Issledovanie konstruktsii shahtnih lentochnyh konveyerov s tochki zreniia bezopasnosti iekspluatatsii uzlov i razrabotka trebovaniy k proektirovaniiu. (1996). Otchet po NIR. Donetsk: Dongiprouglemash, 90.
Kiktev, N. A., Savitskaia, Ya. A., Chichikalo, N. I. (2014). Metodika postroeniia sistemy otobrazheniia protsessa avtomatizatsii uchastkovogo konveyernogo transporta. Energetika і avtomatika, № 1, 65-74.
Averchenkov, V. I., Davydov, S. V., Dunaev, V. P., Ivchenko, V. N. (2011). Konveyery s podvesnoy lentoy. M.: Flinta, 256.
Zhukov, A. D., Smirnova, T. V., Himich, A. O., Eremenko, A. O., Kopylov, N. A. (2013). Raschet parametrov teplovoy obrabotki mineralovatnyh izdeliy s primeneniem. Stroitel'stvo: nauka i obrazovanie, № 1, 1-4.
Maras, M., Hatala, J., Marasová, D. (1997). Application of the method finite elements by numerical modeling stress-strain state in conveyor belts. Acta Montanistica Slovaca, Vol 2, Iss. 2, 101-108.
Bhoyar, R. K., Dr. Handa, C. C. (2013). Design Consideration Of Adjustable Height And Radial Belt Conveyor System. International Journal of Engineering Trends and Technology, Vol 4, Iss. 10, 4377-4382.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2016 Микола Олександрович Кіктєв
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
