Recycling of aircraft components: analysis of normative and technical documentation of quality ensure

Authors

  • Дмитрий Николаевич Макаренко Zhukovsky National Aerospace University "Kharkiv Aviation Institute", Chkalovа str., 17, Kharkov, Ukraine, 61070, Ukraine https://orcid.org/0000-0002-4672-2880

DOI:

https://doi.org/10.15587/2312-8372.2015.44816

Keywords:

recycling, standards, composite material, titanium alloys, aluminum alloys, quality, normative and technical documentation, aerospace engineering

Abstract

The article is devoted to describing and analyzing the existing normative and technical documentation for recycling of aircraft and quality ensure of this process. The problems of directly normative and technical documentation of recycling processes and normative and technical documentation for recyclable materials are considered, as well as analyzed the scope of requirements for the quality of products obtained from recycling.

As a result, it is concluded that currently recycling of aircraft elements is seen as an integral part of recycling is practically not separated; normative and technical documentation largely determined for recycling of metallic compounds, and often impose a requirement for quality of recyclable products, and not to the quality of products obtained from recycling and almost no normative and technical documentation for evaluating the quality of products obtained from recycling of aircraft elements.

Author Biography

Дмитрий Николаевич Макаренко, Zhukovsky National Aerospace University "Kharkiv Aviation Institute", Chkalovа str., 17, Kharkov, Ukraine, 61070

Assistant

Department of cars and transport infrastructure

References

  1. Plankovskii, S. I., Garin, V. O., Tsegel'nik, E. V. (2011). Sovremennye metody utilizatsii polimernyh kompozitsionnyh materialov. Otkrytye informatsionnye i komp'iuternye integrirovannye tehnologii, 51, 186–193.
  2. GOST 6282-88. Nozhnitsy listovye krivoshipnye s naklonnym nozhom. Parametry i razmery. Normy tochnosti. (1997). Moscow: Izd-vo standartov, 10.
  3. GOST 11647-75. Press-nozhnitsy kombinirovannye i nozhnitsy kombinirovannye. Normy tochnosti. (1999). Moscow: Izd-vo standartov, 7.
  4. GOST 12.3.028-82 SSBT. Protsessy obrabotki abrazivnym i el'borovym instrumentom. Trebovaniia bezopasnosti. (2007). Moscow: Izd-vo standartov, 15.
  5. DSTU GOST 21963:2003 (ISO 603-15-99, ISO 603-16-99). Kruhy vidrizni. Tekhnichni umovy. (2004). Kyiv: Derzhspozhyvstandart Ukrainy, 36 s.
  6. NPAOP 28.51-7.28-84. OST 1.42198-84. Elektroerozionnaia obrabotka metallov. Obshchie trebovaniia bezopasnosti. (2007). Moscow: Izd-vo standartov, 15.
  7. GOST 20551-93. Stanki elektroerozionnye vyreznye. Osnovnye razmery. Normy tochnosti. (1985). Moscow: Izd-vo standartov, 15.
  8. GOST 25331-82. Obrabotka elektroerozionnaia. Terminy i opredeleniia. (1982). Moscow: Izd-vo standartov, 12.
  9. GOST 50664-94. Apparaty ul'trazvukovye tehnologicheskie. Rabochie chastoty. (1994). Moscow: Izd-vo standartov, 7.
  10. GOST 10594-80. Oborudovanie dlia dugovoi, kontaktnoi, ul'trazvukovoi svarki i dlia plazmennoi obrabotki. Riady parametrov. (1980). Moscow: Izd-vo standartov, 3.
  11. GOST 12221-79. Apparatura dlia plazmenno-dugovoi rezki metallov. Tipy i osnovnye parametry. (1990). Moscow: Izd-vo standartov, 6.
  12. GOST 36-136-86. Konstruktsii stroitel'nye. Termicheskaia rezka. Obshchie trebovaniia. (1987). Moscow: Izd-vo standartov, 23.
  13. TU 15-739.004-76. Mehanizirovannaia vozdushno-plazmennaia rezka chernyh metallov tolshchinoi do 130 mm, aliuminiia i ego splavov tolshchinoi do 160 mm i medi i ee splavov tolshchinoi do 100 mm. (1987). Moscow: Izd-vo standartov, 23.
  14. TU 16-739.119-77. Avtomaticheskaia vozdushno-plazmennaia rezka chernyh metallov i aliuminiia tolshchinoi do 100 mm, medi tolshchinoi do 60 mm, poluavtomaticheskaia vozdushno-plazmennaia rezka chernyh metallov i aliuminiia tolshchinoi do 80 mm i medi tolshchinoi do 60 mm, a takzhe mehanicheskaia obrabotka izdelii iz trudnoobrabatyvaemyh splavov. (1987). Moscow: Izd-vo standartov, 23.
  15. TU 16-739.042-76. Ruchnaia vozdushno-plazmennaia rezka uglerodistyh i nerzhaveiushchih stalei tolshchinoi do 40 mm, aliuminiia tolshchinoi do 30 mm i medi tolshchinoi do 20 mm. (1987). Moscow: Izd-vo standartov, 23.
  16. GOST 14792-80. Detali i zagotovki, vyrezaemye kislorodnoi i plazmenno-dugovoi rezkoi. Tochnost', kachestvo poverhnosti reza. (1994). Moscow: Izd-vo standartov, 7.
  17. GOST R ISO 14175-2010. Materialy svarochnye. Gazy i gazovye smesi dlia svarki plavleniem i rodstvennyh protsessov. (2011). Moscow: Standartinform, 15.
  18. ISO 9013:2002. Rezka teplovaia. Klassifikatsiia rezov, poluchennyh teplovym sposobom. Geometricheskie harakteristiki izdelii i dopuski na harakteristiki. (2008). Standarty Mezhdunarodnoi organizatsii po standartizatsii (ISO). Katalog v 2-h chastiah. Moscow: FGUP «STANDARTINFORM», 630.
  19. Bod'ian, L. A., Varlamova, I. A., Girevaia, H. Ya., Kalugina, N. L., Medianik, N. L. (2014). Produkt himicheskoi destruktsii polietilentereftalata kak kompleksnyi reagent dlia izvlecheniia organicheskoi massy uglia. Sovremennye problemy nauki i obrazovaniia, 2, 700.
  20. Brooks, D., Giles, J. (2006). Proizvodstvo upakovki iz PET. SPb.: Professiia, 368.
  21. Miheev, S. V., Stroganov, G. B., Romashin, A. G. (2002). Keramicheskie i kompozitsionnye materialy v aviatsionnoi tehnike. Moscow: Al'teks, 276.
  22. Posypaiko, V. I., Kozyreva, N., Logacheva, Yu. P. (1989). Himicheskie metody analiza. Moscow: Vysshaia shkola, 448.
  23. Informatsionnye materialy. Plazkat. Available: http://www.plazkat.ru/informacionnye_materialy/
  24. Vetoshkin, A. G. (2006). Protsessy i apparaty gazoochistki. Penza: Izd-vo PGU, 201.
  25. GOST R 54533-2011. Resursosberezhenie obrashchenie s othodami. Rukovodiashchie printsipy i metody utilizatsii polimernyh othodov. Natsional'nyi standart RF. Available: http://docs.cntd.ru/document/gost-r-54533-2011?block=3
  26. ISO 15270:2008. Plastics — Guidelines for the recovery and recycling of plastics waste. Available: https://www.iso.org/obp/ui/#iso:std:45089:en
  27. Zaiakin, S. Vtorichnaia pererabotka polimerov. OOO "Tehnoplast". Available: http://tehno-plast.ru/cgi-bin/t.pl?040224
  28. In: Svishchev, G. P. (1994). Aviatsiia: Entsiklopediia. Moscow: Bol'shaia Rossiiskaia Entsiklopediia, 736.
  29. Utilizatsiia samoletov. Avia.Pro. Available: http://avia.pro/blog/utilizaciya-samoletov
  30. GOST 30166-95. Resursosberezhenie. Osnovnye polozheniia. (2000). Moscow: Izd-vo standartov, 8.
  31. GOST 30167-95. Resursosberezhenie. Poriadok ustanovleniia pokazatelei v dokumentatsii na produktsiiu. (2001). Moscow: Izd-vo standartov, 19.
  32. GOST 30772-2001. Resursosberezhenie. Obrashchenie s othodami. Terminy i opredeleniia. (2008). Moscow: Izd-vo standartov, 20.
  33. GOST 30773-2001. Resursosberezhenie. Obrashchenie s othodami. Etapy tehnologicheskogo tsikla othodov. (2002). Moscow: Izd-vo standartov, 16.
  34. GOST 30774-2001. Resursosberezhenie. Obrashchenie s othodami. Pasport opasnosti othodov. Osnovnye trebovaniia. (2002). Moscow: Izd-vo standartov, 26.
  35. GOST 30775-2001. Resursosberezhenie. Obrashchenie s othodami. Klassifikatsiia, identifikatsiia i kodirovanie othodov. Osnovnye polozheniia. (2002). Moscow: Izd-vo standartov, 34.
  36. Pro vidkhody. Zakon Ukrainy № 187/98 vid 05.03.1998 r. (1998). Vidomosti Verkhovnoi Rady Ukrainy (VVR), № 36-37, st. 242.
  37. Pro vyluchennia z obihu, pererobku, utylizatsiiu, znyshchennia abo podalshe vykorystannia neiakisnoi ta nebezpechnoi produktsii. Zakon Ukrainy № 1393-XIV vid 14. 01. 2000 r. (2000). Vidomosti Verkhovnoi Rady Ukrainy (VVR), № 12, st. 95.
  38. DSTU – 2195-99 (GOST 17.9.0.2-99). Okhorona pryrody. Povodzhennia z vidkhodamy. Tekhnichnyi pasport vidkhodu. Sklad, vmist, vyklad i pravila vnesennia zmin» (vvedenyi v diiu vid 2001-01-01 na zminu DSTU – 2195-93 (GOST 17.0.0.05-93). (2000). Kyiv: Derzhspozhyvstandart Ukrainy, 20.
  39. DSTU – 3052-95. Resursozberezhennia. Poriadok vstanovlennia pokaznykiv resursozberezhennia v dokumentatsii na produktsiiu. (1996). Kyiv: Derzhstandart Ukrainy, 31.
  40. DSTU – 3910-99 (GOST 17.9.0.1-99). Okhorona pryrody. Povodzhennia z vidkhodamy. Klasyfikatsiia vidkhodiv. Poriadok naimenuvannia za henetychnym pryntsypom i vidnesennia yikh do klasyfikatsiinykh katehorii. (2000). Kyiv: Derzhstandart Ukrainy, 38.
  41. DSTU – 3911-99 (GOST 17.9.0.1-99). Okhorona pryrody. Povodzhennia z vidkhodamy. Vyiavlennia vidkhodiv i podannia informatsiinykh danykh pro vidkhody. Zahalni vymohy. (2000). Kyiv: Derzhstandart Ukrainy, 21.
  42. DSTU – 4462.0.01:2005. Okhorona pryrody. Povodzhennia z vidkhodamy. Terminy ta vyznachennia poniat. (2007). Kyiv: Derzhstandart Ukrainy, 20.
  43. DSTU – 4462.0.02:2005. Okhorona pryrody. Kompleks standartiv u sferi povodzhennia z vidkhodamy. (2007). Kyiv: Derzhstandart Ukrainy, 10.
  44. DSanPiN 2.2.7. 029-99. Hihiienichni vymohy shchodo povodzhennia z promyslovymy vidkhodamy ta vyznachennia yikh klasu nebezpeky dlia zdorovia naselennia. Derzhavna ekolohichna Inspektsiia Ukrainy. Available: http://dei.gov.ua/menyu-4/2012-01-22-11-28-44/1298-sanpin-gigiyena.html
  45. DSTU 2731-94. Syrovyna polimerna vtorynna. Poriadok zbyrannia, zberihannia ta pereroblennia vidkhodiv. (2007). Kyiv: Derzhstandart Ukrainy, 30.
  46. Klasyfikator vidkhodiv DK 005-96. Derzhavnyi klasyfikator Ukrainy; Nakaz Derzhstandartu Ukrainy vid 29 liutoho 1996 r. № 89. Available: http://tc.nusta.com.ua/dkpku/dgerela/225.htm
  47. DSTU 3211:2009/GOST 1639-2009. Brukht ta vidkhody kolorovykh metaliv ta splaviv. (2011). Kyiv: Derzhstandart Ukrainy, 76.
  48. Ivashchenko, V., Kuris, Yu., Kolobov, G. (2011). Scientific aspects of recycling of the sub-standard titanic waste. Eastern-European Journal Of Enterprise Technologies, 4(5(52)), 23-25. Available: http://journals.uran.ua/eejet/article/view/1401/1299
  49. DSTU 4121-2002. Metaly chorni vtorynni. Zahalni tekhnichni umovy. (2003). Kyiv: Derzhstandart Ukrainy, 33.
  50. Makarenko, D. N., Kalashnikova, V. I. (2013). Voprosy utilizatsii elementov letatel'nyh apparatov, izgotovlennyh iz kompozitsionnyh materialov. Mezhd. nauch.-tehn. konf. “Problemy sozdaniia i obespecheniia zhiznennogo tsikla aviatsionnoi tehniki”, 124.
  51. Williams, P. T. (2011). Сarbon Fibres and Resin Chemicals. The University of Leeds, 21.
  52. Guidelines for the Packaging andDelivery of Carbon Fibre CompositeWaste to ELG CARBON FIBRE LTD. (2010). Recycled Carbon Fibre Ltd. Available: http://www.recycledcarbonfibre.com/
  53. Retech Inc., Plasma Centrifugal Furnace. Applications Analysis Report. Risk Reduction Engineering Laboratory. (1992). Office of Research and Development U.S. Environmental Protection Agency, Cincinnati, 50.
  54. Milled Carbon Ltd, Recycling solutions for cured and uncurved carbon fibre composites. (2007, September). Aircraft Fleet Recycling Association. Available: http://www.afraassociation.org/
  55. Pickering, S. J. (2006). Recycling technologies for thermo set composite materials – current status. Composites Part A: Applied Science and Manufacturing, 37 (8), 1206–1215. doi:10.1016/j.compositesa.2005.05.030
  56. Composites Recycling: Market Opportunity Analysis. (2010). Adherent Technologies, Inc. Available: http://www.adherent-tech.com/
  57. Sokolovskii, M. I., Karimov, V. Z., Shcherbakov, Yu. N., Sakov, Yu. L., Vaisman, Ya. I. Ustanovka dlia piroliza othodov kompozitsionnyh materialov. Patent RU № 2208203. Available: http://www.findpatent.ru/patent/220/2208203.html
  58. Oprişan, G., Tăranu, N., Munteanu, V., Enţuc, I. (2010). Application of modern polymeric composite materials in industrial construction. Buletinul institutului politehnic din iaşi Publicat de Universitatea Tehnică „Gheorghe Asachi” din Iaşi Tomul, Тom. LVI (LX), Fasc. 3, 121-130.
  59. Yang, Y., Boom, R., Irion, B., van Heerden, D.-J., Kuiper, P., de Wit, H. (2012). Recycling of composite materials. Chemical Engineering and Processing: Process Intensification, 51, 53–68. doi:10.1016/j.cep.2011.09.007
  60. Zabulonov, D. Yu. (2011). Kachestvo izdelii iz kompozitsionnyh materialov. Kompozitnyi mir. Spetsvypusk «Aviatsiia i kosmos», 28–32. Available: http://uncm.ru/files/uploaded/Pressa_o_nas/Composite_World_AVIA_2011.pdf
  61. Ob utverzhdenii otraslevoi programmy vnedreniia kompozitsionnyh materialov, konstruktsii i izdelii iz nih v stroitel'nom komplekse Rossiiskoi Federatsii. Prikaz ot 24 iiulia 2013 goda N 306. Available: http://docs.cntd.ru/document/499043290

Downloads

Published

2015-05-28

How to Cite

Макаренко, Д. Н. (2015). Recycling of aircraft components: analysis of normative and technical documentation of quality ensure. Technology Audit and Production Reserves, 3(2(23), 26–31. https://doi.org/10.15587/2312-8372.2015.44816

Issue

Vol. 3 No. 2(23) (2015): Systems and control processes. Information technologies. Mathematical modeling. Information and control systems

Section

Systems and Control Processes: Original Research

License

Copyright (c) 2016 Дмитрий Николаевич Макаренко

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.