Task formalization of constructing rational product assembly sequence

Authors

DOI:

https://doi.org/10.15587/2312-8372.2015.47919

Keywords:

production cycle, environmental restrictions, assembly sequence, method, algorithm

Abstract

Analysis of technology of assembly processes has allowed developing mathematical models that reflect the structure of the product and the production system. Ways of reducing the production cycle are defined. On this basis, the rules are designed to rationalize assembly operations.

It is proposed a method of constructing a rational product assembly sequence. Its design takes into account the requirements of safety, assembly dimensional chain, simultaneous installation of several based elements on the base, precision of parts manufacturing, allocation of component assembly.

A method of solving this problem is characterized in that the assembly for this synthesis process is considered complex and environmental constraints. It provides the necessary quality of the product. Application of the method allows to obtain a sequence of assembly, which is suitable for practical implementation in a given production system and to minimize the duration of the production cycle.

Author Biographies

Яна Іванівна Чибіряк, Sumy State University, st. Rimsky-Korsakov 2, Sumy, Ukraine, 40007

Candidate of Technical Sciences, Associate Professor,

Department of Сomputer science (Section of Information Technologies of Design)

Наталія Анатоліївна Федотова, Sumy State University, st. Rimsky-Korsakov 2, Sumy, Ukraine, 40007

Candidate of Technical Sciences, Senior Lecturer,

Department of Сomputer science (Section of Information Technologies of Design)

Михайло Юрійович Думанчук, Sumy National Agrarian University, H. Kondratiieva Str., 160, Ukraine, Sumy, 40021

Senior Lecturer

Department of Technical Services 

References

  1. Arpent'ev, B. M., Kutsyn, A. N., Sozonov, Yu. I. (2001). Prognozirovanie kachestva funktsionirovaniia tehnicheskih sistem. Vestnik NTU «KhPI», 10, 41–49.
  2. Zarubin, V. N., Kapustin, N. M. (1979). Avomatizirovannaia sistema proektirovaniia tehnologicheskih protsessov mehanosborochnogo proizvodstva. M.: Mashinostroenie, 274.
  3. Zaharov, N. V., Timofeev, Yu. V. (1992). Razrabotka tehnologicheskih protsessov sborki. K.: UMKVO, 152.
  4. Lebedovskii, M. S. (1977). Avtomatizatsiia protsessov v mashinostroenii. L.: SZPI, 81.
  5. Savuliak, V. V. (2013). Skladal'nі protsesi v mashinobuduvannі. Vіnnitsia: VNTU, 99.
  6. Shabaikovich, V. A. (2011). Problemi skladal'nogo virobnitstva. Visnyk Natsionalnoho universytetu "Lvivska politekhnika", 713, 212–216.
  7. Vanіn, O. V. (2011). Suchasnі pіdhodi do proektuvannia serіinih avtomatizovanih skladal'nih kompleksіv. Materialy 8 Mizhnar. naukovo-praktychnoi internet-konferentsii "Suchasnist. Nauka. Chas. Vzaiemodiia ta vzaiemovplyv". Available: http://intkonf.org/vanin-ov-suchasni-pidhodi-do-proektuvannya-seriynih-avtomatizovanih-skladalnih-kompleksiv/
  8. Bozhidarnіk, V. V., Grigor'eva, N. S., Shabaikovich, V. A. (2005). Avtomatichne skladannia virobіv. Luts'k: Nadstir'ia, 386.
  9. Grin'ova, V. M., Salun, M. M. (2009). Organіzatsіia virobnitstva. K.: Znannia, 582.
  10. Voronin, A. V., Grechuhin, A. I., Kalashnikov, A. S. et al. (1985). Mehanizatsiia i avtomatizatsiia sborki v mashinostroenii. M.: Mashinostroenie, 316.
  11. Larichev, O. I. (2006). Teoriia i metody priniatiia reshenii. M.: Logos, 392.
  12. Bozhko, A. N. (2010). Vybor ratsional'noi posledovatel'nosti sborki izdeliia. Nauka i obrazovanie, 7. Available: http://technomag.edu.ru/doc/147483.html/. Last accessed 08.07.2015.
  13. Timofeev, Yu. V., Zaharov, N. V., Mel'nichenko, A. A. (1994). Matematicheskaia model' upravleniia tochnost'iu obshchei sborki agregatnih stankov. Vіsnik SumDU, 1, 49–54.
  14. Tanaev, V. S., Povarich, M. P. (1974). Sintez graf-shem algoritmov vybora reshenii. Minsk: Nauka i tehnika, 112.
  15. Haustova, A. V. (2000). Formalizatsiia proektnyh reshenii formirovaniia struktur ob'ektov tehnologicheskogo proektirovaniia. Lugansk, 197.
  16. Bazrov, B. M., Shalin, A. P. (1987). Ritmichnost' – put' povysheniia effektivnosti izgotovleniia detalei na stankah-avtomatah i avtomaticheskih liniah. Vol. 2. M.: VNII TEMR, 48.
  17. Konoplianchenko, E. V. (2001). Pіdvishchennia nadіinostі roboti skladal'nih sistem shliahom optimіzatsії chasovih tehnologіchnih lantsiugіv. Kharkiv: NTU «KhPI», 20.

Downloads

Published

2015-07-23

How to Cite

Чибіряк, Я. І., Федотова, Н. А., & Думанчук, М. Ю. (2015). Task formalization of constructing rational product assembly sequence. Technology Audit and Production Reserves, 4(2(24), 49–54. https://doi.org/10.15587/2312-8372.2015.47919

Issue

Vol. 4 No. 2(24) (2015): Information technologies. Information and control systems

Section

Information Technologies: Original Research

License

Copyright (c) 2016 Яна Іванівна Чибіряк, Наталія Анатоліївна Федотова, Михайло Юрійович Думанчук

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.