Analysis of surface hardening technology workers of agricultural machinery

Authors

  • В'ячеслав Вікторович Падалка Poltava State Agrarian Academy 36003, Poltava, st. Scovorody, 1/3, Ukraine
  • Олександр Сергійович Каркач Poltava State Agrarian Academy 36003, Poltava, st. Scovorody, 1/3, Ukraine

DOI:

https://doi.org/10.15587/2312-8372.2012.4881

Keywords:

superficial work-hardening, cutting an element, machine.

Abstract

Known scientific researches confirmed need of use superficial simplification cutting elements of agricultural machines. Carrying out analysis of known technologies. The rational method of drawing nonmetallic coverings that will increase the term of operation cutting parts machines is reasonable.

Author Biographies

В'ячеслав Вікторович Падалка, Poltava State Agrarian Academy 36003, Poltava, st. Scovorody, 1/3

Ph.D., Associate Professor

Chair repair of machinery and technology of construction materials

Олександр Сергійович Каркач, Poltava State Agrarian Academy 36003, Poltava, st. Scovorody, 1/3

Student at the Faculty of Engineering and Technology

References

  1. Хрущёв М. М. Износостойкость и структура твердых наплавок [Текст] / М. М. Хрущёв, М. Бабичев. — М. : Машиностроение, 1971. — 95 с.
  2. Денисенко М. Зношування та підвищення довговічності робочих органів сільськогосподарських машин [Текст] / М. Денисенко, А. Опальчук // Вісник ТНТУ. — 2011. — Спецвипуск. — Частина 2. — С. 201—210.

Downloads

Published

2012-04-30

How to Cite

Падалка, В. В., & Каркач, О. С. (2012). Analysis of surface hardening technology workers of agricultural machinery. Technology Audit and Production Reserves, 2(2(4), 17–19. https://doi.org/10.15587/2312-8372.2012.4881

Issue

Vol. 2 No. 2(4) (2012): Technology audit and production reserves

Section

Production reserves

License

Copyright (c) 2016 В'ячеслав Вікторович Падалка, Олександр Сергійович Каркач

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.