Technological methods of increasing the durability and resource of working parts of tillage machines

Authors

DOI:

https://doi.org/10.15587/2312-8372.2015.48825

Keywords:

resource intensity of wear, recovery method, deformation, vibration hardening

Abstract

In this paper we discuss the problem of agricultural engineering is the need to improve the reliability of agricultural machinery based on the use of more efficient technologies both in their manufacture and in the repair industry. The main purpose of research is to study and choice of a method to increase the durability and life of working organs of tillers, taking into account design, technology and material science factors. Analysis of the causes that contribute to the wear rate of the cutting elements working organs of tillers, allows the development process of hardening of details as in their production and recovery. The dynamics of the deterioration of the basic elements of cutting the working bodies of the cultivator wing shares and plowshares. Based on the data developed and put into production technology of hardening of cutting elements working organs of tillers by the vibration deformation. The research results can be used in the manufacture of engineering for hardening of manufactured parts. We have developed a technique using vibration reduction hardening increases the service life and durability of working organs of tillers.

Author Biographies

Анатолий Андреевич Дудников, Poltava State Agrarian Academy, 1/3 Skovorody str., Poltava, 36003

Candidate of Technical Sciences, Professor, Head of Department

Department of repair of machinery and technology of construction materials

Александра Ивановна Беловод, Poltava State Agrarian Academy, 1/3 Skovorody str., Poltava, 36003

Candidate of Technical Sciences, Associate Professor

Department of technical disciplines

Андрей Григорьевич Пасюта, The State Enterprise "Pilot Farm 9th January", Poltava region, Khorolsky district, v. Yalosovetskoe

Candidate of Technical Sciences, Director

 

Антон Александрович Келемеш, Poltava State Agrarian Academy, 1/3 Skovorody str., Poltava, 36003

Candidate of Technical Sciences, Senior Lecturer

Department of repair of machinery and technology of construction materials

Александр Викторович Горбенко, Poltava State Agrarian Academy, 1/3 Skovorody str., Poltava, 36003

Candidate of Technical Sciences, Associate Professor

Department of repair of machinery and technology of construction materials

References

  1. Pro zatverdzhennia Derzhavnoi tsilovoi prohramy realizatsii tekhnichnoi polityky v ahropromyslovomu kompleksi na period do 2015 roku. Postanova Kabinetu Ministriv Ukrainy vid 30 travnia 2007 r. № 785. Available: http://zakon3.rada.gov.ua/laws/show/785-2007-п
  2. Betenya, G. F. (1986). Povyshenie dolgovechnosti pochvorezhuschih elementov selskohozyaystvennoy tehniki naplavkoy namorazhivaniem. Minsk: BelNIINTI, 44.
  3. Sidorov, S. A. (1996). Obosnovanie effektivnyh sposobov povysheniya rabotosposobnosti i iznosostoykosti sfericheskih diskov pochvoobrabatyvayuschih mashin. Moskva, 320.
  4. Volkov, P. M., Balovnev, G. G., Tenenbaum, M. M. (1977). Osnovy teorii i rascheta selskohozyaystvennyh mashin na prochnost i nadezhnost. Moskva: Mashinostroenie, 310.
  5. Tkachev, V. N. (1984). Iznos i povyshenie dolgovechnosti rabochih organov pochvoobrabatyvayuschih mashin. Moskva: Mashinostroenie, 372.
  6. Gill, W. R. (1985, January). Soil-disk geometry in harrow design. Journal of Terramechanics, Vol. 22, № 3, 178. doi:10.1016/0022-4898(85)90097-7
  7. Ang, H. S., Tang, W. H. (1984). Probability concepts in engineering planning and design. Vol. 2. New York: John Wiley and Sons, 378.
  8. Dudnіkov, A. A., Bilovod, O. I., Kanivets, A. V., Dudnyk, V. V. (2011). Increased longevity of parts in their recovery. Proceedings of the 5th International Scientific and Practical Conference. Minsk: Belarusian State Technological University, 142–144.
  9. Dudnikov, A. A., Bilovod, O. I., Pasyuta, A. G. (2014). Pidvischennya nadiynosti organiv gruntoobrobnih mashin. Visnyk Poltavskoi derzhavnoi ahrarnoi akademii, 3, 172–177.
  10. Pasyuta, A. (2014). Determination of wear pattern of cutting elements of tillage machines. Technology Audit And Production Reserves, 6(1(20)), 8–11. doi:10.15587/2312-8372.2014.34778

Downloads

Published

2015-09-22

How to Cite

Дудников, А. А., Беловод, А. И., Пасюта, А. Г., Келемеш, А. А., & Горбенко, А. В. (2015). Technological methods of increasing the durability and resource of working parts of tillage machines. Technology Audit and Production Reserves, 5(1(25), 4–7. https://doi.org/10.15587/2312-8372.2015.48825

Issue

Vol. 5 No. 1(25) (2015): Mechanical engineering and machine building. Energy, energy-saving technologies and equipment

Section

Mechanical engineering and machine building

License

Copyright (c) 2016 Анатолий Андреевич Дудников, Александра Ивановна Беловод, Андрей Григорьевич Пасюта, Антон Александрович Келемеш, Александр Викторович Горбенко

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.