Fuel injection process modeling using CFD technologies

Authors

  • Євген Сергійович Грайворонський Kharkiv national automobile-highway university, Ukraine

DOI:

https://doi.org/10.15587/2312-8372.2012.5477

Keywords:

Two-stroke engine, injection model, method of discrete droplets

Abstract

The article describes technology and results of GDI process modeling using AVL FIRE software. Analyzing of results helps determine parameters of electronic controlled fuel system

Author Biography

Євген Сергійович Грайворонський, Kharkiv national automobile-highway university

Graduate student of Department of Internal combustion engines

References

  1. AVL FIRE [Електронний ресурс]. – Режим доступу: https://www.avl.com/web/ast/fire. - Загол. з екрану.
  2. Врублевский, А.Н. Научные основы создания аккумуляторной топливной системы для быстроходного дизеля [Текст] : монография / А.Н.Врублевский. – Харьков : Изд-во ХНАДУ, 2009. – 216 с.
  3. Fan, L., Li, G., Han, Z., and Reitz, R., "Modeling Fuel Preparation and Stratified Combustion in a Gasoline Direct Injection Engine ," SAE Technical Paper 1999-01-0175, 1999, doi:10.4271/1999-01-0175.
  4. Zhao, F.F. Automotive Gasoline Direct-Injection Engines [Text] /F.F. Zhao, D.L. Harrington, M.C. Lai. – SAE International, 2002. – 372 p. – R-315.

Downloads

Published

2012-12-11

How to Cite

Грайворонський, Є. С. (2012). Fuel injection process modeling using CFD technologies. Technology Audit and Production Reserves, 6(2(8), 5–6. https://doi.org/10.15587/2312-8372.2012.5477

Issue

Vol. 6 No. 2(8) (2012): Scientific outcomes 2012

Section

Industrial Technology

License

Copyright (c) 2016 Євген Сергійович Грайворонський

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.