Mathematical modeling of bulk material batching

Authors

  • Ігор Валентинович Коваленко National Technical University of Ukraine «Kyiv Polytechnic Institute», ave. Peremohy 37, Kyiv, Ukraine, 03056, Ukraine https://orcid.org/0000-0001-6919-856X
  • Дмитро Сергійович Янцибаєв National Technical University of Ukraine «Kyiv Polytechnic Institute», ave. Peremohy 37, Kyiv, Ukraine, 03056, Ukraine https://orcid.org/0000-0002-7275-7366

DOI:

https://doi.org/10.15587/2312-8372.2016.59867

Keywords:

butcher, bulk material, linear weight butcher, bulking, intensity, accuracy, MATLAB

Abstract

The authors conducted mathematical modeling of the moving process of bulk material from the hopper of the linear weight butcher in receiving working body of the feeder. 5 typical areas of structural and mechanical condition of bulk material during its bulking from the discharge channel in the side of the bunker were considered. Formula describing the speed of material bulking was developed. Formulas that describe the thickness of the layer of bulking material on the feeder of linear butcher and the required speed of movement to maintain this thickness were developed too.

The butcher reached maximum speed providing matching of bulk material bulking from the discharge bunker channel and intensity of its movement on the supporting body of the feeder. To solve this problem it was conducted simulation of the intensity curve of moving process of bulk material using MATLAB software.

The article will be interest to designers, engineers and scientists who conduct research in the development and improvement of weight butchers. Also, the article will be useful for graduate students and senior students of relevant specialties.

Author Biographies

Ігор Валентинович Коваленко, National Technical University of Ukraine «Kyiv Polytechnic Institute», ave. Peremohy 37, Kyiv, Ukraine, 03056

Candidate of Technical Sciences, Associate Professor

Department of Сhemical, Polymer and Silicate Engineering

Дмитро Сергійович Янцибаєв, National Technical University of Ukraine «Kyiv Polytechnic Institute», ave. Peremohy 37, Kyiv, Ukraine, 03056

Department of Сhemical, Polymer and Silicate Engineering

References

  1. Havva, O. M., Bespalko, A. P., Volchko, A. I. (2008). Obladnannia dlia pakuvannia produktsii u spozhyvchu taru. Kyiv: IATs «Upakovka», 436.
  2. Katalymov, A. B., Liubartovich, V. A. (1990). Dozirovanie sypuchih i viazkih materialov. Leningrad: Khimiia, 240.
  3. Maslo, M. A. (2003). Vdoskonalennia vahovykh dozatoriv. Upakovka, 28, 29.
  4. Ovcharenko, A. I., Sereda, A. D., Shapiro, M. V. (2007). Pogreshnost' dozirovaniia sypuchih produktov. Upakovka, 1, 44–47.
  5. Ovcharenko, A. I. (2008). Puti povysheniia kachestva dozirovaniia krupnodispersnyh produktov. Khlebopekarskoe i konditerskoe delo, 3, 50–51.
  6. Donis, V. K., Rachkovskii, A. E., Sin, V. M. (2004, February). How the Conveyor Belt Length Affects Belt Weigher Accuracy. Measurement Techniques, Vol. 47, № 2, 163–167. doi:10.1023/b:mete.0000026215.97105.55
  7. Aleksandrovic, S., Jovic, M. (2011, September). Analysis of Belt Weigher Accuracy Limiting Factors. International Journal of Coal Preparation and Utilization, Vol. 31, № 5, 223–241. doi:10.1080/19392699.2011.552896
  8. Sokolovskii, V. V. (1990). Statika sypuchei sredy. Moscow: Nauka, 272.
  9. Zenkov, R. L., Grinevich, G. P., Isaev, B. C. (1977). Bunkernye ustroistva. Moscow: Mashinostroenie, 223.
  10. Kiriia, R. V., Braginets, D. D., Mostovoi, B. I. (2009). Istechenie sypuchego gruza iz bunkera s bokovym shchelevym otverstiem. Sbornik nauchnyh trudov Natsional'nogo gornogo universiteta, 34, 114–122.
  11. Havva, O. M., Derenivska, A. V. (2014). Liniini vahovi dozuvalni prystroi dyskretnoi dii dlia sypkoi produktsii. Upakovka, 1, 50–52.
  12. Grafiki Iazyk programmirovaniia Matlab. Obuchaiushchie uroki. (02.02.2010). Available: http://life-prog.ru/view_cat.php?cat=5

Downloads

Published

2016-01-21

How to Cite

Коваленко, І. В., & Янцибаєв, Д. С. (2016). Mathematical modeling of bulk material batching. Technology Audit and Production Reserves, 1(2(27), 35–40. https://doi.org/10.15587/2312-8372.2016.59867

Issue

Vol. 1 No. 2(27) (2016): Information technologies. Mathematical modeling. Systems and control processes

Section

Mathematical Modeling: Original Research

License

Copyright (c) 2016 Ігор Валентинович Коваленко, Дмитро Сергійович Янцибаєв

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.