Improving the hardware and software for control of normalized parameters of production factors

Authors

  • Екатерина Дмитриевна Поперека Odessa National Polytechnic University, Shevchenko 1, Odessa, Ukraine, 65044, Ukraine https://orcid.org/0000-0003-1152-5008
  • Виталий Леонидович Костенко Odessa National Polytechnic University, Shevchenko 1, Odessa, Ukraine, 65044, Ukraine https://orcid.org/0000-0002-8922-4232
  • Дарья Игоревна Зайцева Odessa National Polytechnic University, Shevchenko 1, Odessa, Ukraine, 65044, Ukraine
  • Константин Сергеевич Тыманюк Odessa National Polytechnic University, Shevchenko 1, Odessa, Ukraine, 65044, Ukraine https://orcid.org/0000-0003-0679-3737

DOI:

https://doi.org/10.15587/2312-8372.2016.74869

Keywords:

hardware, software, measurement, control, information systems, LabVIEW platform

Abstract

The results of improving the hardware and software for control of normalized parameters of sanitary and hygienic factors of the workplace are shown based on previously developed using «Dolphin» type measuring stand.

Software and hardware of computer systems for control of the normalized parameters of production factors are studied.

The issues for empowerment of the measuring equipment through the use of mDAQ12 data acquisition microsystem and expansion of the range of the sensor are considered.

A block diagram of the hardware and software of the normalized parameters control is developed. Development of the hardware is completed. mDAQ12 data acquisition microsystem is used as the basis in return «Dolphin» type measuring stand used in previous studies. Development of a flexible software using LabVIEW platform is made that enables operational control of normalized parameters of production factors, by reducing time to conduct measurement and processing of measurement results of 9 physical factors, namely, noise, vibration, air velocity, temperature and relative humidity, pressure, infrared illumination and monitoring of air quality.

The adopted development concept allows creating a hardware and software package with the possibility of reconfiguration.

The proposed hardware and software also allows at least an order reducing weight and overall dimensions and improve economic performance, as well as halving the time and cost of software development by applying LabWIEV platform.

The results of the control simulation are shown. Research can be practically used for automated control of the sanitary and hygienic factors of production industry.

Author Biographies

Екатерина Дмитриевна Поперека, Odessa National Polytechnic University, Shevchenko 1, Odessa, Ukraine, 65044

Postgraduate

Department of Metal-cutting machines Metrology and Certification

 

Виталий Леонидович Костенко, Odessa National Polytechnic University, Shevchenko 1, Odessa, Ukraine, 65044

Doctor of Technical Sciences, Professor

Department of Metal-cutting machines Metrology and Certification

Дарья Игоревна Зайцева, Odessa National Polytechnic University, Shevchenko 1, Odessa, Ukraine, 65044

Department of Information systems

Константин Сергеевич Тыманюк, Odessa National Polytechnic University, Shevchenko 1, Odessa, Ukraine, 65044

Postgraduate

Department of Metal-cutting machines Metrology and Certification

References

  1. Kostenko, V., Nіkolenko, A., Popereka, E., Yadrova, M., Tymaniuk, K. (2014). Information-measuring system of control of the normalized parameters of industrial factors. Eastern-European Journal Of Enterprise Technologies, 3(9(69)), 51–56. doi:10.15587/1729-4061.2014.25419
  2. Yadrova, M. V., Popereka, E. D., Kostenko, V. L. (2014). Modelirovanie izmeritel'nogo p'ezopreobrazovatelia sistemy kontrolia normirovannyh parametrov vibratsii. Trudy ХV mezhdunarodnoi nauchno-prakticheskoi konferentsii «Sovremennye informatsionnye i elektronnye tehnologii (SIET-2014)». Odessa: ONPU, 80–81.
  3. Srivastava, A., Mandal, B. (2006). Risk from vibration in Indian mines. Indian Journal of Occupational and Environmental Medicine, Vol. 10, № 2, 53–57. doi:10.4103/0019-5278.27460
  4. Ruggiero, A., Russo, D., Sommella, P. (2016, November). Determining environmental noise measurement uncertainty in the context of the Italian legislative framework. Measurement, Vol. 93, 74–79. doi:10.1016/j.measurement.2016.07.007
  5. Assunta, C., Ilaria, S., De Simone, S., Gianfranco, T., Teodorico, C., Carmina, S., Anastasia, S., Roberto, G., Francesco, T., Valeria, R. M. (2015, January). Noise and cardiovascular effects in workers of the sanitary fixtures industry. International Journal of Hygiene and Environmental Health, Vol. 218, № 1, 163–168. doi:10.1016/j.ijheh.2014.09.007
  6. Speckman, K. L., Allan, A. E., Sawka, M. N., Young, A. J., Muza, S. R., Pandolf, K. B. (1988, December). Perspectives in microclimate cooling involving protective clothing in hot environments. International Journal of Industrial Ergonomics, Vol. 3, № 2, 121–147. doi:10.1016/0169-8141(88)90015-7
  7. St. Leger, A., Cecchi, V., Basu, M., Miu, K., Nwankpa, C. (2016, October). Automated system for determining frequency dependent parameter model of transmission line in a laboratory environment. Measurement, Vol. 92, 1–10. doi:10.1016/j.measurement.2016.05.064
  8. Palmius, J. (2007). Criteria for measuring and comparing information system. Proceedings of the 30th Information Systems Research Seminar in Scandinavia IRIS, Vol. 1, 102–126.
  9. Komp'iuternaia programma «Attestatsiia rabochih mest po usloviiam truda na predpriiatiiah». (2015). Sibirskii tsentr bezopasnosti truda. Available: http://www.sibcbt.ru/nashi-uslugi/drugie-uslugi/programnoe-obespechenie
  10. Programmnyi kompleks «Azimut». (2013). Katalog produktsii i uslug grazhdanskogo naznacheniia. Available: http://www.niti.ru/2_activity/2_1_commercia_activity/2_1_2_facility/us_2_azimut.pdf
  11. Programma Attestatsiia-5.1 (SOUT). (2015). Kompaniia «EkoSfera». Available: http://ekosf.ru/programma-attestatsiya-5-pk/programma-attestatsiya-5-1-sout
  12. Popereka, E., Kostenko, V. (2015). Integrated control of sanitary-hygienic condition of the working area. Bulletin of the National Technical University «Kharkiv Polytechnic Institute»: Mechanical-technological systems and complexes, 22 (1131), 121–124.

Downloads

Published

2016-07-26

How to Cite

Поперека, Е. Д., Костенко, В. Л., Зайцева, Д. И., & Тыманюк, К. С. (2016). Improving the hardware and software for control of normalized parameters of production factors. Technology Audit and Production Reserves, 4(3(30), 32–39. https://doi.org/10.15587/2312-8372.2016.74869

Issue

Vol. 4 No. 3(30) (2016): Technology Transfer in the Transport Industry. Information and Control Systems. Systems and Control Processes

Section

Systems and Control Processes: Original Research

License

Copyright (c) 2016 Екатерина Дмитриевна Поперека

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.