Analysis of errors of profile transformation scale

Authors

DOI:

https://doi.org/10.15587/2312-8372.2017.93590

Keywords:

shape of packages, cross winding, shadow projection, registration of parameters, profile transformation

Abstract

A necessity to improve the quality of textile products and reduce production costs associated with losses of raw materials in the processing requires the development of automated quality inspection systems for all steps of textile production. Promising is the use of contactless methods of nondestructive testing based on the methods of vision.

The object of research is a device to inspect the shape of textile packages by shadow projection method for monitoring in real time.

A series of experiments and theoretical research are conducted aimed at the study of structural parameters of the device to inspect the shape of the packing by the shadow projection method, providing the required accuracy. On the basis of the mutual arrangement of the structural elements of the light source, camera shutter and inspected bobbin, the impact of each of them on the scale transformation error for inspection of the package shape of cross winding is defined.

This result allows to select the mutual arrangement of design elements and to set their permissible variations of devices to inspect the package shape of cross winding by the shadow projection method.

Inspection of package shape in the process of their developments will prevent the formation of defective packages. It will increase a percentage of defect packages and the loss of raw material in the textile industry, which ultimately will raise its efficiency.

Author Biographies

Magomedali Nureddin Nuriyev, Azerbaijan State Economic University (UNEC), Baku

Doctor of Technical Sciences, Professor

Department of Standardization and Certification

Rena Mursal Hacimuradova, Azerbaijan Technical University, Baku

Department of Machine Parts

Esmin Jalal Khalilov, Azerbaijan Technical University, Baku

Department of Machine Parts

Ayten Aliaga Aqayeva, Azerbaijan State Economic University (UNEC), Baku

Lecturer

Department of Design

Ganira Zargar Jabbarova, Azerbaijan State Economic University (UNEC), Baku

Lecturer

Department of Expertise of Consumer Goods

References

  1. Kukin, G. N., Soloviev, A. N., Kobliakov, A. I. (1992). Tekstil'noe materialovedenie. Ed. 2. Moscow, 272.
  2. Zinger, H. M., Rozhanskaia, I. N. (1968). Vychislitel'noe ustroistvo dlia opredeleniia plotnosti namotki priazhi na tsilindricheskih bobinah. Tekstil'naia promyshlennost', 11, 12–15.
  3. Zaitsev, V. P., Panin, I. N., Minaev, A. G. (1984). Izmerenie udel'noi plotnosti namotki v radial'nom i osevom napravleniiah konicheskoi bobiny somknutoi struktury. Izvestiia vuzov. Tehnologiia tekstil'noi promyshlennosti, 4, 40–44.
  4. Ilchuk, V. P. (1983). Issledovanie i proektirovanie podvesok vysokoskorostnyh bobinoderzhatelei namotochnyh mehanizmov mashin dlia proizvodstva himicheskih volokon. Moscow, 264.
  5. Vilkov, P. V. (2005). Razrabotka i issledovanie mehanizma peremotki niti elektrifitsirovannym motal'nym barabanchikom. Ivanovo, 159.
  6. Francini, F., Longobardi, G., Venchiarutti, V. (1985). Electrooptical system for the automatic inspection of Interlaced threads. Applied Optics, 24 (18), 2874–2875. doi:10.1364/ao.24.002874
  7. Hunsicker, R. J., Patten, J., Ledford, A., Ferman, C., Allen, M., Ellis, C. (1994). Automatic vision inspection and measurement system for external screw threads. Journal of Manufacturing Systems, 13 (5), 370–384. doi:10.1016/0278-6125(94)p2586-4
  8. Martynchik, K. I. (2015). Razrabotka i analiz vysokoskorostnogo priemno-namotochnogo mehanizma mashin dlia proizvodstva i pererabotki himicheskih nitei s podvesom parallelogrammnogo tipa. St. Petersburg: SPbGUPTD, 137.
  9. Kuchin, A. A. (1975). Optical instruments for surface roughness measurements. Measurement Techniques, 18 (1), 54–58. doi:10.1007/bf01121729
  10. Kiselev, P. N., Palochkin, S. V., Rudovskii, P. N.; assignee: Kostroma State Technological University. (27.04.2006). Sposob kontrolia formy pakovki i ustroistvo dlia ego osushchestvleniia. Patent RU № 2275320. Appl. № 2004122288/12. Filed 19.07.2004. Available: http://www.findpatent.ru/patent/227/2275320.html
  11. Neelov, V. I. (1977). Opredelenie matematicheskoi modeli obiemnoi plotnosti namotki bobiny na motal'nom avtomate «Autosuk». Izvestiia vuzov. Tehnologiia tekstil'noi promyshlennosti, 1, 52–55.
  12. Nuriyev, M. N., Rudovskii, P. N. (1992). Pribor dlia kontrolia namotki niti na bobinu. Dep. v UzNIINTI. № 162-Uz92. Tashkent, 15.
  13. Nuriyev, M. N., Kiselev, P. N. (2006). Vliianie konstruktivnyh parametrov ustroistva na masshtab preobrazovaniia pri kontrole formy bobin metodom tenevoi proektsii. Izvestiia vuzov. Tehnologiia tekstil'noi promyshlennosti, 4C, 99–102.
  14. Nuriyev, M. N., Rudovskii, P. N. (2007). Osobennosti metodov opredeleniia uprugo-dissipativnyh harakteristik tela namotki. Uchenye zapiski Azerbaidzhanskogo tehnicheskogo universiteta, 4, 43–46.
  15. Kuchin, A. A., Obradovich, K. A. (1981). Opticheskie pribory dlia izmereniia sherohovatosti poverhnosti. Leningrad: Mashinostroenie, Leningradskoe otdelenie, 360.
  16. Rudovskii, P. N., Nuriyev, M. N., Fatdahov, R. M. et al. (1989). Issledovanie struktury namotki metodom svetovogo secheniia. Information sheet of AzNIINTI. Baku, 4.
  17. Rudovskii, P. N., Nuriyev, M. N., Kiselev, P. N. (2006). Poluchenie graficheskoi modeli pakovok krestovoi namotki. Izvestiia vuzov. Tehnologiia tekstil'noi promyshlennosti, 3, 124–125.
  18. Rudovskii, P. N., Nuriyev, M. N., Kiselev, P. N. (2006). Razrabotka kompleksnogo pokazatelia dlia otsenki formy pakovok krestovoi motki. Izvestiia vuzov. Tehnologiia tekstil'noi promyshlennosti, 5, 131–133.
  19. Nuriyev, M., Dadashova, K., Radzhabov, I. (2016). Development of methods for recognition of structural defects using package surface image. ScienceRise, 4(2(21)), 6–10. doi:10.15587/2313-8416.2016.66143
  20. Eks winding heads: Cross winding heads for yarns for a number of regions of application. (1994). Fibre Chemistry, 25 (4), 286–287. doi:10.1007/bf00555347

Downloads

Published

2017-01-31

How to Cite

Nuriyev, M. N., Hacimuradova, R. M., Khalilov, E. J., Aqayeva, A. A., & Jabbarova, G. Z. (2017). Analysis of errors of profile transformation scale. Technology Audit and Production Reserves, 1(2(33), 48–54. https://doi.org/10.15587/2312-8372.2017.93590

Issue

Vol. 1 No. 2(33) (2017): Information and Control Systems

Section

Systems and Control Processes: Original Research

License

Copyright (c) 2017 Magomedali Nureddin Nuriyev, Rena Mursal Hacimuradova, Esmin Jalal Khalilov, Ayten Aliaga Aqayeva, Ganira Zargar Jabbarova

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.