Possibility evaluation of the use of shredded vulcanizate modified by nitrogen-containing compounds
DOI:
https://doi.org/10.15587/2312-8372.2015.52012Keywords:
measurement accuracy, shredded vulcanizate, modification, composite, nitrogen-containing compounds, diffusion, optimizationAbstract
During research with the help of mathematical modeling methods have been developed elastomer compositions with optimum composition based on rubbers of general purpose containing shredded vulcanizate modified by nitrogen-containing compounds. Today, the trend of development of polymer materials science is to find efficient ways of using materials known by modifying their properties. The priority in the development of a modern economy is the solution of environmental problems; first of all assess the possibility of re-use of waste as a production of rubber products and bump rubber. As a result, it is identified a synergistic effect of influence of conforming modification on the level of rubber strength, parameters of influence of the physical and mechanical factors on the efficiency of the modification are obtained. It is defined an influence of the equipment type for the manufacture of rubber compounds with shredded vulcanizate. It is developed and tested a mathematical model of the modification process automation of shredded vulcanizate, received the practical confirmation of their performance. The urgency of research in this area is the ability to automate the process of modifying shredded vulcanizate and forecasting results of the use of secondary raw materials for high-quality performance of the final product. This allows to virtually avoiding long and resource-intensive process of experimentation and empirical tests. That, in turn, will reduce the cost of time, human and material resources in order to optimize the manufacturing process.References
- Leonov, D. I., Leonov, I. V. (1999). Analiz sposobov izmel'cheniia iznoshennyh shin. Mashinostroitel', 8, 28–29.
- Former, C., Osen, E. (2003). Stand und Perspektiven des Gummirecyclings. Kautsch. und Gummi Kunstst., Vol. 56, № 3, 81–89.
- Mikulonok, I. O. (2001). Osnovni metody vykorystannia humovmisnykh vidkhodiv. Khimichna promyslovist Ukrainy, 5, 53–58.
- Myhre, M., MacKillop, D. A. (2002, July). Rubber Recycling. Rubber Chemistry and Technology, Vol. 75, № 3, 429–474. doi:10.5254/1.3547678
- Drozdovskii, V. F. (1990). Sposoby polucheniia regenerata. Moscow: TsNIITEneftehim, 64.
- Gul', E. V., Orlovskii, P. N., Shohin, I. A.; In: Orlovskii, P. N. (1966). Regeneratsiia i drugie metody pererabotki staroi reziny. Moscow: Himiia, 140.
- Hoffman, D. (1978). Verfahren der zerkleinereeng von altreiten. Gummi, Asbest, Kunststoffe, Vol. 31, № 3, 150–157.
- Hilyard, N. C., Tong, S. G., Harrison, K. (1983). Influence of the cerve system on the properties of vulcanizates incorporating whole tyre scrap rubber crumb. Plast and Rubber Process and appe, Vol. 3, № 4, 315–322.
- Rajalingam, P., Baker, W. E. (1992, November). The Role of Functional Polymers in Ground Rubber Tire-Polyethylene Composite. Rubber Chemistry and Technology, Vol. 65, № 5, 908–916. doi:10.5254/1.3538650
- Fesus, E. M. (1991). Eggleton Use of modified rubber mite in mixtures on base an general and special purpose rubbers. Rubber World, Vol. 203, № 206, 23–26.
- Vashchenko, Yu., Hrytsak, O. (2009). Vyznachennia tekhnolohichnykh osoblyvostei modyfikatsii poverkhni podribnenoho vulkanizatu na riznomu obladnanni. Eastern-European Journal Of Enterprise Technologies, 4(10(40)), 17–21. Available: http://journals.uran.ua/eejet/article/view/22356
- Golub, L. S., Grishak, O. A., Nikolenko, N. V., Homuk, V. I., Vashchenko, Yu. N. (2011). Operational effectiveness of the granulated cured stock in elastomeric compositions with account of modifying materials adsorptions on its surface. Issues of Chemistry and Chemical Technology, 1, 42–48.
- Fursa, O. A., Vashchenko, T. V., Vashchenko, Yu. N. (2012). The effectiveness of the use of the treated solutions containing compounds in the compositions of ground vulcanized rubber for shoes. Issues of Chemistry and Chemical Technology, 4, 87–90.
- D'iakonov, V. (2006). MathCAD 2001: spetsial'nyi spravochnik. St. Petersburg: Piter, 832.
Downloads
Published
2015-09-22
How to Cite
Євдокименко, Н. М., Фурса, О. О., & Гаврилюк, Ю. В. (2015). Possibility evaluation of the use of shredded vulcanizate modified by nitrogen-containing compounds. Technology Audit and Production Reserves, 5(3(25), 42–47. https://doi.org/10.15587/2312-8372.2015.52012
Issue
Section
Systems and Control Processes: Original Research
License
Copyright (c) 2016 Наталя Михайлівна Євдокименко, Ольга Олександрівна Фурса, Юрій Володимирович Гаврилюк
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
