MODERN EQUIPMENT FOR STORAGE, GASIFICATION AND TRANSPORTATION OF LIQUID PRODUCTS OF AIR SEPARATION AND LIQUID METHANE

Authors

  • Элжбиета Зайдлерова «Ferox, a.s.», Ustecka, 30, Decin, 40530, Czech Republic, Czechia
  • Милан Мокер «Ferox, a.s.», Ustecka, 30, Decin, 40530, Czech Republic, Czechia
  • Вацлав Хрз «Ferox, a.s.», Ustecka, 30, Decin, 40530, Czech Republic, Czechia
  • Иван Буреш «Ferox, a.s.», Ustecka, 30, Decin, 40530, Czech Republic, Czechia
  • Алексей Кротов Представительство «Ferox, a.s.» по РФ и странам СНГ, ул. Мельниковская, 12А, оф. 804, г. Екатеринбург, 620027, РФ, Russian Federation

DOI:

https://doi.org/10.18198/j.ind.gases.2005.0156

Keywords:

Oxygen, Nitrogen, Argon, Natural gas, Carbon dioxide, Cryogenic equipment, Storage, Gasification, Transportation, Cryogenic liquids

Abstract

The increase of consumption of liquid oxygen, nitrogen, argon, methane and carbon dioxide stimulates growth of production of the cryogenic equipment for storage, gasification and transportation. As result, variety of the products is developing to more specific products and their parameters as unit volumes, maximum withdrawal rates, pressures etc. are breaking previous limitations.  All this is typical of the equipment, which is made by universally known company «Chart-Ferox». Basic types of the modern cryogenic equipment made by this firm are presented, and their performance confirm high level of the products.

Author Biographies

Элжбиета Зайдлерова, «Ferox, a.s.», Ustecka, 30, Decin, 40530, Czech Republic

Elzbieta Zeidlerova

Милан Мокер, «Ferox, a.s.», Ustecka, 30, Decin, 40530, Czech Republic

Milan Mocker

Вацлав Хрз, «Ferox, a.s.», Ustecka, 30, Decin, 40530, Czech Republic

Vaclav Chrz

Иван Буреш, «Ferox, a.s.», Ustecka, 30, Decin, 40530, Czech Republic

Ivan Bures

Алексей Кротов, Представительство «Ferox, a.s.» по РФ и странам СНГ, ул. Мельниковская, 12А, оф. 804, г. Екатеринбург, 620027, РФ

Alex Krotov

Downloads

Issue

No. 1 (2005): Технические газы

Section

PLANTS AND THE EQUIPMENT FOR MANUFACTURING OF AIR SEPARATION PRODUCTS AND OTHER INDUSTRIAL GASES

License

LICENSE AGREEMENT
After receiving an article for publication as required revision scientometric databases each author directs the license agreement on the assignment and transfer of the management of copyright. Signatures of the author (s) it is desirable to seal the personnel department of the institution where the author works (authors), or the seal of the Faculty.
Revision refers to the authors one layout for proofreading. Permissible only those fixes that result in compliance with the layout of the original text of the article. Significant changes are not permitted. Layout should be sent to the editorial office within days of receipt.