ISOTHERMAL ROTARY COMPRESSOR: THE WAY OF COMPRESSION OF GASES, THE BASIC CIRCUIT AND METHOD OF CALCULATION

Authors

  • В. П. Бондарь Украинская ассоциация производителей технических газов «УА-СИГМА», а/я 271, г.Одесса, 65026, Украина, Ukraine
  • С. В. Жукова Украинская ассоциация производителей технических газов «УА-СИГМА», а/я 271, г.Одесса, 65026, Украина, Ukraine

DOI:

https://doi.org/10.18198/j.ind.gases.2005.0163

Keywords:

Isothermal compress

Abstract

At perfection of compressors seeks to provide the isothermal of process of compression. In real designs of existing compressors that is not possible to achieve. The practical way of compression of gases on an isotherm is described at present article. The basic circuit of experimental installation, results of experiment and the created method on their basis of calculation of process of compression of the biphase stream are resulted. The design and the circuit of compressor in which the process of compression is based on movement of a biphase stream gas (vapor)–liquid on a screw line in a field of acceleration’ action is considered. Thus heat from a gas phase to liquid is allocated in direct contact during all process of compression. The offered compressor providing volumetric compression, does not concern to known types of machines. At the same time it is the compressor of static compression.

Author Biographies

В. П. Бондарь, Украинская ассоциация производителей технических газов «УА-СИГМА», а/я 271, г.Одесса, 65026, Украина

V.P. Bondar

С. В. Жукова, Украинская ассоциация производителей технических газов «УА-СИГМА», а/я 271, г.Одесса, 65026, Украина

S.V. Zhukova

Downloads

Issue

No. 2 (2005): Технические газы

Section

PROCESSES, CYCLES, SCHEMES AND THE EQUIPMENT OF REFRIGERATION AND CRYOGENIC SYSTEMS

License

LICENSE AGREEMENT
After receiving an article for publication as required revision scientometric databases each author directs the license agreement on the assignment and transfer of the management of copyright. Signatures of the author (s) it is desirable to seal the personnel department of the institution where the author works (authors), or the seal of the Faculty.
Revision refers to the authors one layout for proofreading. Permissible only those fixes that result in compliance with the layout of the original text of the article. Significant changes are not permitted. Layout should be sent to the editorial office within days of receipt.