HIGHLY EFFECTIVE INSTALLATION «CHROM-3» FOR EXTRACTING KRYPTON-XENON MIXTURE

Authors

  • В. Л. Бондаренко ООО «Айсблик», ул. Пастера, 29, г. Одесса, 65026, Украина, Ukraine
  • Н. П. Лосяков ООО «Айсблик», ул. Пастера, 29, г. Одесса, 65026, Украина, Ukraine
  • М. Ю. Савинов Московский государственный технический университет им. Н.Э. Баумана, Лефортовская наб., д.1, факультет «Энергомашиностроение», г. Москва, 107005, РФ, Russian Federation
  • Б. И. Волынский ООО «Хром», Гжельский пер., 7, г. Москва, 105120, РФ, Russian Federation
  • А. С. Бронштейн ООО «Хром», Гжельский пер., 7, г. Москва, 105120, РФ, Russian Federation
  • В. Е. Позняк ООО «Хром», Гжельский пер., 7, г. Москва, 105120, РФ,

DOI:

https://doi.org/10.18198/j.ind.gases.2005.0165

Keywords:

Krypton-xenon mixture, Installation for crude concentration, Low temperature rectification, Hydrocarbons burning-off, Vapor lift

Abstract

The krypton-xenon mixture (КXM) used to be extracted at the out-of-date large air separation installations of the УСК type. These ineffective installations are practically dilapidated and subject to be replaced. Three new generation installations «Chrom-3» designed for the extraction of KXM were set in operation to replace the УСК ones. Some new progressive technical solutions protected by patents were applied in the basic circuit design of «Chrom-3». The installation does not contain the most complicated and power-consuming part – a compression unit; there are practically no moving parts in it. It helps to achieve the best operational efficiency of this installation in comparison with the current ones. The KXM extraction factor makes 0,99 in the «Chrom-3» installations. The «Chrom-3» installations are successfully operated in the oxygen manufactures of several metallurgical works. 

Author Biographies

В. Л. Бондаренко, ООО «Айсблик», ул. Пастера, 29, г. Одесса, 65026, Украина

V.L. Bondarenko

Н. П. Лосяков, ООО «Айсблик», ул. Пастера, 29, г. Одесса, 65026, Украина

N.P. Losyakov

М. Ю. Савинов, Московский государственный технический университет им. Н.Э. Баумана, Лефортовская наб., д.1, факультет «Энергомашиностроение», г. Москва, 107005, РФ

M.Yu. Savinov

Б. И. Волынский, ООО «Хром», Гжельский пер., 7, г. Москва, 105120, РФ

B.I. Volynsky

А. С. Бронштейн, ООО «Хром», Гжельский пер., 7, г. Москва, 105120, РФ

A.S. Bronstein

В. Е. Позняк, ООО «Хром», Гжельский пер., 7, г. Москва, 105120, РФ

V.E. Poznyak

Downloads

Issue

No. 2 (2005): Технические газы

Section

PLANTS AND THE EQUIPMENT FOR MANUFACTURING OF AIR SEPARATION PRODUCTS AND OTHER INDUSTRIAL GASES

License

LICENSE AGREEMENT
After receiving an article for publication as required revision scientometric databases each author directs the license agreement on the assignment and transfer of the management of copyright. Signatures of the author (s) it is desirable to seal the personnel department of the institution where the author works (authors), or the seal of the Faculty.
Revision refers to the authors one layout for proofreading. Permissible only those fixes that result in compliance with the layout of the original text of the article. Significant changes are not permitted. Layout should be sent to the editorial office within days of receipt.