COMPOUND OF TECHNICAL GASES RECEIVED FROM AIR ON PLANTS OF PRESSURE SWING ADSORPTION WITHOUT HEAT

Authors

  • В. И. Файнштейн ОАО «Криогенмаш», пр-т Ленина, 67, г. Балашиха Московской обл., 143907, РФ, Russian Federation
  • Н. А. Пуртов ОАО «Криогенмаш», пр-т Ленина, 67, г. Балашиха Московской обл., 143907, РФ, Russian Federation
  • Ю. Н. Кобец ОАО «Криогенмаш», пр-т Ленина, 67, г. Балашиха Московской обл., 143907, РФ, Russian Federation
  • В. Я. Шкадов ОАО «Криогенмаш», пр-т Ленина, 67, г. Балашиха Московской обл., 143907, РФ, Russian Federation

DOI:

https://doi.org/10.18198/j.ind.gases.2005.0174

Keywords:

Pressure swing adsorption, Adsorbent, Oxygen, Nitrogen, Argon, Compound of products

Abstract

Plants for manufacture from air the nitrogen or oxygen by pressure swing adsorption (PSA) find more and more wide application. These plants are differ from cryogenic air separations plants by class of impurity and its quantity. The compound of received product (oxygen or nitrogen) in PSA plants depends on properties of adsorbent and operating modes of plants. Therefore are necessary for them the separate researches of compounds of producible oxygen or nitrogen. The estimation of contents of argon in oxygen and nitrogen received by PSA method is made on the basis of calculation’s results and immediate measurements. The received results allows make use of the technical gases made by PSA plants in various technologies.

Author Biographies

В. И. Файнштейн, ОАО «Криогенмаш», пр-т Ленина, 67, г. Балашиха Московской обл., 143907, РФ

V. I. Fainshtein

Н. А. Пуртов, ОАО «Криогенмаш», пр-т Ленина, 67, г. Балашиха Московской обл., 143907, РФ

N. A. Purtov

Ю. Н. Кобец, ОАО «Криогенмаш», пр-т Ленина, 67, г. Балашиха Московской обл., 143907, РФ

Yu. N. Kobets

В. Я. Шкадов, ОАО «Криогенмаш», пр-т Ленина, 67, г. Балашиха Московской обл., 143907, РФ

V. Ya. Shkadov

Downloads

Issue

No. 3 (2005): Технические газы

Section

PLANTS AND THE EQUIPMENT FOR MANUFACTURING OF AIR SEPARATION PRODUCTS AND OTHER INDUSTRIAL GASES

License

LICENSE AGREEMENT
After receiving an article for publication as required revision scientometric databases each author directs the license agreement on the assignment and transfer of the management of copyright. Signatures of the author (s) it is desirable to seal the personnel department of the institution where the author works (authors), or the seal of the Faculty.
Revision refers to the authors one layout for proofreading. Permissible only those fixes that result in compliance with the layout of the original text of the article. Significant changes are not permitted. Layout should be sent to the editorial office within days of receipt.