MANUFACTURE OF ALUMINIUM-SILICIUM ALLOYS BY PYROMETALLURGY METHOD OF USING THE OXYGEN BLASTING

Authors

  • В. Е. Волков Украинская инновационно-финансовая компания, пр-т Красных казаков, 6, г. Киев, 04073, Украина, Ukraine
  • Г. В. Куриннов Украинская инновационно-финансовая компания, пр-т Красных казаков, 6, г. Киев, 04073, Украина, Ukraine
  • Г. К. Лавренченко Украинская ассоциация производителей технических газов “УА–СИГМА”, а/я 271, г. Одесса, 65026, Украина, Ukraine

DOI:

https://doi.org/10.18198/j.ind.gases.2005.0175

Keywords:

Aluminium, Silicium, Alloy, Aluminium oxide, Silicium oxide, Carbon, Oxygen, Restore

Abstract

Aluminium can be used in the new effective technologies of direct manufacture of the electric power, reception of less-common metals in metallurgy and others. For this purpose it is necessary to have more economic methods of its reception. Such method for pyrometallurgy manufacture of aluminium — silicium alloys from natural raw materials contains argil and silica is described. Peat is applied for reactivation of oxides of aluminium and silicium oxides as coaly component. On the basis of the given method is created a powermetallurgical complex in which furnaces for smelt and restoration oxides are used. In the furnace of smelt is used the blasting of air enriched with oxygen up to 60 %. The complex is characterized by low basic expenses in comparison with known almost 10 times more.

Author Biographies

В. Е. Волков, Украинская инновационно-финансовая компания, пр-т Красных казаков, 6, г. Киев, 04073, Украина

V.E. Volkov

Г. В. Куриннов, Украинская инновационно-финансовая компания, пр-т Красных казаков, 6, г. Киев, 04073, Украина

G.V. Kurinnov

Г. К. Лавренченко, Украинская ассоциация производителей технических газов “УА–СИГМА”, а/я 271, г. Одесса, 65026, Украина

G.K. Lavrenchenko

Downloads

Issue

No. 3 (2005): Технические газы

Section

INDUSTRIAL GASES IN MODERN TECHNOLOGIES

License

LICENSE AGREEMENT
After receiving an article for publication as required revision scientometric databases each author directs the license agreement on the assignment and transfer of the management of copyright. Signatures of the author (s) it is desirable to seal the personnel department of the institution where the author works (authors), or the seal of the Faculty.
Revision refers to the authors one layout for proofreading. Permissible only those fixes that result in compliance with the layout of the original text of the article. Significant changes are not permitted. Layout should be sent to the editorial office within days of receipt.