PURE HYDROGEN AS BY-PRODUCT OF TECHNICAL HYDROGEN PRODUCTION
DOI:
https://doi.org/10.18198/j.ind.gases.2005.0191Keywords:
Technical hydrogen, Pure hydrogen, Krioadsorption purification, Hydrogen cylinders, Preparation of cylinders, Analytical control, Quality coefficientAbstract
Here is description of technology basics, facilities and experience of long-term operation of pure hydrogen by means of krioadsorption purification of technical hydrogen obtained from water electrolysis. The value of total volumetric portion of admixtures in purified hydrogen amounts to no more than 110–7%. Ordinary steel 40-liter hydrogen cylinders prepared for filling by means of gradual scavenging with deep drained air, nitrogen and purified hydrogen can be used as packing materials for pure hydrogen. When hydrogen is graded for a purity of 99,995 to 99,99999 vol. %, samples for analysis should be collected from every vessel.
Downloads
Issue
Section
License
LICENSE AGREEMENT
After receiving an article for publication as required revision scientometric databases each author directs the license agreement on the assignment and transfer of the management of copyright. Signatures of the author (s) it is desirable to seal the personnel department of the institution where the author works (authors), or the seal of the Faculty.
Revision refers to the authors one layout for proofreading. Permissible only those fixes that result in compliance with the layout of the original text of the article. Significant changes are not permitted. Layout should be sent to the editorial office within days of receipt.