SAFETY VALVES FOR THE BASIC AND AUXILIARY EQUIPMENT OF CRYOGENIC SYSTEMS

Authors

  • Вацлав Влчек «Traccom s.r.o.», Klostermannova, 138, Chomutov, 43001, Czech Republic (представительство фирмы «Herose GmbH»), Czechia
  • Иоахим Эмке «Herose GmbH», Elly-Heuss-Knapp-Strasse, 12, Bad Oldesloe, 23843, Germany, Germany

DOI:

https://doi.org/10.18198/j.ind.gases.2005.0207

Keywords:

Safety valve, Valve for cryogenic temperatures, Design, Principle of action, Classification, Degreasing, Quality inspection

Abstract

For protection of the cryogenic equipment against over-high pressures which can arise during operation it is necessary to use the reliable and technically perfect valves. Classification of modern safety valves is resulted subject to various characters. Designs of the basic types of safety valves which find application in cryogenic, compressor, capacitor and gasification equipment are considered. The effective technology of clearing of valves’ details is described during several operations. It enables to apply them in the environment of oxygen. The multistage monitoring system of valves’ quality is stated.

Author Biographies

Вацлав Влчек, «Traccom s.r.o.», Klostermannova, 138, Chomutov, 43001, Czech Republic (представительство фирмы «Herose GmbH»)

Vaclav Vlcek

Иоахим Эмке, «Herose GmbH», Elly-Heuss-Knapp-Strasse, 12, Bad Oldesloe, 23843, Germany

Joachim W. Ehmke

Downloads

Issue

No. 6 (2005): Технические газы

Section

ECONOMY OF ENTERPRISES. ENERGY-SAVING. SAFETY

License

LICENSE AGREEMENT
After receiving an article for publication as required revision scientometric databases each author directs the license agreement on the assignment and transfer of the management of copyright. Signatures of the author (s) it is desirable to seal the personnel department of the institution where the author works (authors), or the seal of the Faculty.
Revision refers to the authors one layout for proofreading. Permissible only those fixes that result in compliance with the layout of the original text of the article. Significant changes are not permitted. Layout should be sent to the editorial office within days of receipt.