OPTIMIZATION OF DRY AND CLEARING BLOCK OF AIR IN AIR SEPARATING UNIT OF A HIGH PRESSURE WITH THE PURPOSE OF DECREASE POWER CONSUMPTION

Authors

  • Г. К. Лавренченко Украинская ассоциация производителей технических газов «УА-СИГМА», а/я 271, г. Одесса, Украина, 65026, Ukraine
  • А. В. Копытин Украинская ассоциация производителей технических газов «УА-СИГМА», а/я 271, г. Одесса, Украина, 65026, Ukraine
  • С. Г. Швец Украинская ассоциация производителей технических газов «УА-СИГМА», а/я 271, г. Одесса, Украина, 65026, Ukraine

DOI:

https://doi.org/10.18198/j.ind.gases.2006.0214

Keywords:

Air separating unit, Adsorption, Desorption, Dry and clearing block of air, Expander-compressor unit

Abstract

Air separating unit of a high pressure have sufficient technical and constructive potential for their perfection with the purpose of decrease the charge of the electric power on manufacture air separation products. One of consumers of the electric power is the dry and clearing block complex of air. Optimization is unit as on circuit parameters, and constructive, allows to lower practically to zero the electric capacity consumed by electroheaters. It becomes possible due to use of energy of expansion air in the expander-compressor unit. It is shown, that in air separating unit such as AgKgKAArg-2 at realization of the decisions offered in the given article time adsorption on water a pair and on carbon dioxide, at the organization separate dry and clearing air, will make 24 hours. The charge of heating and cooling gas of 750 m3/h. 

Author Biographies

Г. К. Лавренченко, Украинская ассоциация производителей технических газов «УА-СИГМА», а/я 271, г. Одесса, Украина, 65026

G.K. Lavrenchenko

А. В. Копытин, Украинская ассоциация производителей технических газов «УА-СИГМА», а/я 271, г. Одесса, Украина, 65026

A.V. Kopytin

С. Г. Швец, Украинская ассоциация производителей технических газов «УА-СИГМА», а/я 271, г. Одесса, Украина, 65026

S.G. Shvets

Downloads

Issue

No. 1 (2006): Технические газы

Section

PLANTS AND THE EQUIPMENT FOR MANUFACTURING OF AIR SEPARATION PRODUCTS AND OTHER INDUSTRIAL GASES

License

LICENSE AGREEMENT
After receiving an article for publication as required revision scientometric databases each author directs the license agreement on the assignment and transfer of the management of copyright. Signatures of the author (s) it is desirable to seal the personnel department of the institution where the author works (authors), or the seal of the Faculty.
Revision refers to the authors one layout for proofreading. Permissible only those fixes that result in compliance with the layout of the original text of the article. Significant changes are not permitted. Layout should be sent to the editorial office within days of receipt.