PISTON AIR COMPRESSOR OF NEW GENERATION FOR ASP REALIZING CYCLES OF AVERAGE AND HIGH PRESSURE

Authors

  • Н. П. Гринь ОАО «Сумское НПО им. М.В.Фрунзе», ул. Горького, 58, г. Сумы, Украина, 40004, Ukraine
  • Ю. Б. Наталуха ОАО «Сумское НПО им. М.В.Фрунзе», ул. Горького, 58, г. Сумы, Украина, 40004, Ukraine
  • А. В. Смирнов ОАО «Сумское НПО им. М.В.Фрунзе», ул. Горького, 58, г. Сумы, Украина, 40004, Ukraine

DOI:

https://doi.org/10.18198/j.ind.gases.2009.0468

Keywords:

Air separation plant, Piston compressor, Multistage compression of air, Compressors greasing, En-bloc directional compressors, Perfection of compressors

Abstract

JSC «Sumy Frunze NPO» started release of piston compressors for air separation plants (ASP) in 50th years of the last century. A number of compressors of new generation now is made for ASP of average and high pressure: «2ВМ10-27/71», «4ВМ10-55/71», «6ВМ16-150/200» and others. In their designs a new technical decisions of domestic and foreign compressor engineering improving quality of products and reliability at operation are applied.

Author Biographies

Н. П. Гринь, ОАО «Сумское НПО им. М.В.Фрунзе», ул. Горького, 58, г. Сумы, Украина, 40004

N.P. Grin

Ю. Б. Наталуха, ОАО «Сумское НПО им. М.В.Фрунзе», ул. Горького, 58, г. Сумы, Украина, 40004

Yu.B. Nataluha

А. В. Смирнов, ОАО «Сумское НПО им. М.В.Фрунзе», ул. Горького, 58, г. Сумы, Украина, 40004

A.V. Smirnov

Downloads

Issue

No. 6 (2009): Технические газы

Section

PLANTS AND THE EQUIPMENT FOR MANUFACTURING OF AIR SEPARATION PRODUCTS AND OTHER INDUSTRIAL GASES

License

LICENSE AGREEMENT
After receiving an article for publication as required revision scientometric databases each author directs the license agreement on the assignment and transfer of the management of copyright. Signatures of the author (s) it is desirable to seal the personnel department of the institution where the author works (authors), or the seal of the Faculty.
Revision refers to the authors one layout for proofreading. Permissible only those fixes that result in compliance with the layout of the original text of the article. Significant changes are not permitted. Layout should be sent to the editorial office within days of receipt.