THE EXPERIENCE OF WORKING OUT AND USE OF “GRIF” FILTERS FOR CLEANING UP COMPRESSED GASES

Authors

  • П. Н. Гракович Institute of mechanics of metals and polymers systems by name V.A. Belyi of Byelorussian NAS, Kirov Str, 32a, Homel`, Byelorussiya, 246050, Belarus
  • Л. Ф. Иванов Institute of mechanics of metals and polymers systems by name V.A. Belyi of Byelorussian NAS, Kirov Str, 32a, Homel`, Byelorussiya, 246050, Belarus
  • А. В. Смирнов «Sumskoe NPO by name M.V. Frunze», ave. Kurskiy, 30, Sumy, Ukraine, 40020, Ukraine

DOI:

https://doi.org/10.18198/j.ind.gases.2013.0665

Keywords:

Compressed gases, Cleaning up, Fluoroplastic, Filter, Contaminants, Air, Natural gas, The gases containing hydrogen, Pressure, Carbamide

Abstract

The increase of requirements to cleanliness of the compressed gases is apparent. For this purpose different types of filters are used. A technique for obtaining fibrous porous fluoroplastic-4, named Griftex, by a laser ablation method has been described. On its basis different Grif filters for cleaning up compressed gases from polar and nonpolar contaminants are made. The Grif filters are recommended to install near the place where the cleaned up compressed gas is consumed. The experience of successful application of Grif and Grif-T filters for cleaning up compressed gases, namely, the air of low and high pressure, natural gas, the gases containing hydrogen, etc. has been gained. The positive results on cleaning up compressed carbon dioxide from oil aerosols have been obtained. In that case the compressed carbon dioxide was supplied for carbamide synthesis under the pressure of 15 MPa.

Author Biographies

П. Н. Гракович, Institute of mechanics of metals and polymers systems by name V.A. Belyi of Byelorussian NAS, Kirov Str, 32a, Homel`, Byelorussiya, 246050

P.N. Grakovich

Л. Ф. Иванов, Institute of mechanics of metals and polymers systems by name V.A. Belyi of Byelorussian NAS, Kirov Str, 32a, Homel`, Byelorussiya, 246050

L.F. Ivanov

А. В. Смирнов, «Sumskoe NPO by name M.V. Frunze», ave. Kurskiy, 30, Sumy, Ukraine, 40020

A.V. Smirnov

References

Grakovich P.N., Ivanov L.F., Kalinin L.A. et al. (2008). Laser ablation of polytetraftorethylene// Russian chemical journal (Journal of Russian chemical society by name D.I. Mendeleev). — V. 52. — No. 3. — P. 97-105. (Rus.).

Patent of USSR 1461052. Method of obtaining cotton wool from polytetraftorethylene/ МКИ, С07 С21/18, С08 J11/04. (Rus.).

Patent of USSR 1674587. Method of obtaining cotton wool from polytetraftorethylene / МКИ, D01 D5/00,D02 J13/00. (Rus.).

Tolstopyatov E.M., Grakovich P.N., Ivanov L.F. et al. (2002). On mechanism of filaments formation at laser ablation of polytetraftorethylene// Questions of chemie and chemical technology. — No. 3. —P. 128-131. (Rus.).

Gritsenko K., Lytvyn O., Grakovich P. et al. (2007). Polymer films filled with organic molecules by CO2 laser evaporation in vacuum// Applied Surface Science. — V. 253. — No. 19. — P. 8028-8031.

Ryabchenko I.L., Tolstopyatov E.M., Grakovich P.N. et al. (2009). Characteristics of porous structure of material «Griftecs» made from polytetraftorethylene// Materials. Technologies. Instruments. — V. 14. —No. 1. — P. 43-47. (Rus.).

Grakovich P.N. (2011). Porous systems on the base of polytetraftorethylene// Porous pervious materials: technologies and products on their base. Materials of lectures of the 4th internat. symposium. Byelorussiya, 27-28 october — P. 314-324. (Rus.).

PatentRB 3901. Method of separation of oils from gaseous mixture and equipment for its realization/ МКПВ 27 D 7/00. (Rus.).

PatentRB 6740 С1. Multilayers filter material/ МКПВ 01 D 39/16.

Grakovich P.N., Ivanov L.F., Panteleev P.V. (2011). From idea to science capacious goods// Herald of Belneftechim. — No. 12. — P. 53-57. (Rus.).

PatentRB on useful model No. 2082.Installation for washing precious stones in chemical active media/ МКП B 28D 7/00. (Rus.).

Grakovich P.N., Ivanov L.F., Ryabchenko I.L. (2004). Installations «Grif-diamondалмаз» и «Grif-brilliant» for washing diamonds and brilliants// Papers of the 2nd European and Asian symposium on problems of durability of materials and machines for regions of cold climate. YakutskЯкутск, Russia. 16-20 august 2004. — Part 3. — P. 183-189. (Rus.).

Vasil`kov A.Yu., Nikitin L.N., Naumkin A.V. et al. (2009). Золото- и серебросодержащий Pervious porous polytetraftorethylene containing gold and silver, which was obtained by use laser radiation, supercritical carbon dioxide and and metallic-vapor synthesis// Russian nanotechnologies. — V. 4. — No. 11-12. — P. 128-132. (Rus.).

Smotrin I.S., Zhandarov K.N., Sheybak V.M. et al. (2009). Elastic obturators from composit material for treatment of external fistulas: elaboration, manufacture and basing clinical application// Zhurnal Grodnenskogo gosudarstvennogo meditsynskogo universiteta|Journal of Grodnensky state medical university. — No. 2. — P. 151-155. (Rus.).

Tsydik I.S., Zhuk I.G., Sheybak V.M. et al. (2006). Plastic of soft textures defects (review of literature)// Zhurnal Grodnenskogo gosudarstvennogo meditsynskogo universiteta|Journal of Grodnensky state medical university. — No. 3 (15). — P. 16-20. (Rus.).

Downloads

Issue

No. 2 (2013): Технические газы

Section

PLANTS AND THE EQUIPMENT FOR MANUFACTURING OF AIR SEPARATION PRODUCTS AND OTHER INDUSTRIAL GASES

License

LICENSE AGREEMENT
After receiving an article for publication as required revision scientometric databases each author directs the license agreement on the assignment and transfer of the management of copyright. Signatures of the author (s) it is desirable to seal the personnel department of the institution where the author works (authors), or the seal of the Faculty.
Revision refers to the authors one layout for proofreading. Permissible only those fixes that result in compliance with the layout of the original text of the article. Significant changes are not permitted. Layout should be sent to the editorial office within days of receipt.