On the issue of numerical transformation of seismological signal

Authors

  • I. Yu. Mikhaylik Institute of Geophysics of the National Academy of Sciences of Ukraine, Ukraine
  • K. V. Petrenko Institute of Geophysics of the National Academy of Sciences of Ukraine, Ukraine

DOI:

https://doi.org/10.24028/gzh.0203-3100.v34i2.2012.116628

Abstract

This article is devoted to conversion of seismic analog signal to digital code. The conversion is done by means of microprocessor instead of digital signal processor. This makes the data handling cheaper retaining its efficiency.

References

http://www.analog.com. Datasheet: 2-Channel, ±10V Input Rang, High throughput, 24 - bit ∑-Δ ADC - ADC 7732.

http://www.atmel.com. Datasheet: 8-bit Flash Microcontroller - AT89C51ED2.

Smith S. W. The Scientist and Engineer’s Guide to Digital Signal Processing. - California: Technical Publishing, 1997. - 640 p.

Published

2012-04-01

How to Cite

Mikhaylik, I. Y., & Petrenko, K. V. (2012). On the issue of numerical transformation of seismological signal. Geofizicheskiy Zhurnal, 34(2), 151–153. https://doi.org/10.24028/gzh.0203-3100.v34i2.2012.116628

Issue

Section

Scientific Reports