Modeling of partial closure of slots system in perforated isotropic medium reinforced by stringers
Keywords:
perforated plate, stringers, rectilinear variable width slits, contact stresses, contact zonesAbstract
On the basis of the methods of the theory of elasticity, a mathematical description of the model of partial closure of a system of slits in a perforated isotropic medium with foreign transverse inclusions is given. Such a medium can be considered as a perforated unrestricted plate, reinforced by a system of stringers of a very narrow cross section. It is believed that the medium is weakened by a periodic system of circular holes and rectilinear variable width slits. The variable width of the slits is comparable to elastic deformations. A method of solving the periodic elastic problem and an explicit method of constructing complex potentials corresponding to the unknown normal displacements along rectilinear slits are applied. General representations of solutions are constructed, that describe a class of problems with a periodic distribution of stresses outside circular holes and slits with contact zones. To determine the unknown contact stresses and sizes of contact zones, a singular integral equation is obtained, that reduces to a system of nonlinear algebraic equations. The system of algebraic equations can be solved by the method of successive approximations. As a result, the contact stresses and sizes of contact zones have been found.References
Finkel, V. M. (1977). Fizicheskiye osnovy tormozheniya razrusheniya [Physical principles of inhibition of fracture].Moscow: Metallurgiya, 360 p. [in Russian].
Parton, V. Z., & Morozov, Ye. M. (1985). Mekhanika uprugo-plasticheskogo razrusheniya [Mechanics of elastic-plastic fracture].Moscow: Nauka, 504 p. [in Russian].
Mirsalimov, V. M. (1986). Nekotoryye zadachi konstruktsionnogo tormozheniya treshchin [Some problems of structural inhibition of cracks]. Fiziko-khim. Mekhanika Mterialov − Materials Science, vol. 22, no. 1, pp. 94–98 [in Russian].
Tolkachev, V. M. (1964). Peredacha nagruzki ot stringera konechnoy dliny k beskonechnoy i polubeskonechnoy plastine [Transfer of a load from a stringer of finite length to an infinite and semi-infinite plate]. Dokl. AN SSSR, vol. 154, no. 4, pp. 86–88 [in Russian].
Dolgikh, V. N., & Filshtinskiy, L. A. (1976). Ob odnoy modeli regulyarnoy kusochno-odnorodnoy sredy [On a model of a regular piecewise homogeneous medium]. Izv. AN SSSR. Mekhanika Tverdogo Tela, no. 2, pp. 158–164 [in Russian].
Vanin, G. A. (1985). Mikromekhanika kompozitsionnykh materialov [Micromechanics of Composite Materials]. Kyiv: Nauk. dumka, 302 p. [in Russian].
Broyek, D. (1980). Osnovy mekhaniki razrusheniya [Fundamentals of fracture mechanics].Moscow: Vyssha shkola, 368 pp. [in Russian].
Cherepanov, G. P. (1983). Mekhanika razrusheniya kompozitsionnykh materialov [Mechanics of destruction of composite materials].Moscow: Nauka, 296 p. [in Russian].
Maksimenko, V. N. (1988). Vliyaniye priklepannykh reber zhestkosti na razvitiye treshchin vozle otverstiya [The effect of riveted stiffeners on the development of cracks near the hole]. Prikl. Mekhanika i Tekhn. Fizika − Journal of Applied Mechanics and Technical Physics, vol. 29, no. 2, pp. 133–140 [in Russian].
Savruk, M. P., & Kravets, V. S. (1994). Reinforcement of a thin cracked plate by a system of parallel stringers. Materials Sci., vol. 30, iss. 1, pp. 95–104.
Savruk, M. P., & Kravets, V. S. (1995). Two-dimensional problems of the theory of elasticity for reinforced cracked plates. Materials Sci., vol. 31, iss. 3, pp. 350–362.
Savruk, M. P, & Kravets, V. S. (1999). Effect of breaks in riveted stringers on the elastic and limiting equilibrium of a cracked plate. Materials Sci., vol. 35, iss. 3, pp. 339–348.
Mir-Salim-zade, M. V. (2005). Treshchina so svyazyami mezhdu beregami v izotropnoy srede, usilennoy regulyarnoy sistemoy stringerov [Fissure with connections between the banks in an isotropic medium, reinforced by a regular stringers system]. Mekhanika Kompozit. Materialov − Mechanics of Composite Materials, vol. 41, no. 6, pp. 773–782 [in Russian].
Mir-Salim-zade, M. V. (2007). Razrusheniye izotropnoy sredy, usilennoy regulyarnoy sistemoy stringerov [Destruction of an isotropic medium reinforced by a regular stringer system]. Mekhanika Kompozit. Materialov − Mechanics of Composite Materials, vol. 51, no.1, pp. 59–72 [in Russian].
Mirsalimov, V. M., & Mustafayev, A. B. (2014). Tochnoye resheniye kontaktnoy zadachi o chastichnom vzaimodeystvii beregov shcheli peremennoy shiriny pri deystvii temperaturnogo polya [Exact solution of the contact problem on the partial interaction of variable width slit faces under the action of a temperature field]. Problemy Mashinostroyeniya −Journal of Mechanical Engineering, vol. 17, no. 3, pp. 33–37 [in Russian].
Mustafayev, A. B. (2014). Vzaimodeystviye beregov shcheli peremennoy shiriny pri izgibe polosy (balki) pod vozdeystviyem temperaturnogo polya [Interaction of variable width slit faces with the bending of a strip (beam) under the influence of a temperature field]. Mekhanika Mashin, Mekhanizmov i Materialov − Mechanics of Machines, mechanisms and Materials, no. 3, pp. 30–36 [in Russian].
Mirsalimov, V. M., & Mustafayev, A. B. (2015). Resheniye zadachi o chastichnom kontaktirovanii beregov shcheli peremennoy shiriny pod deystviyem temperaturnogo polya [Solution of the problem of partial contact of variable width slit faces under the action of a temperature field]. Fiziko-khim. Mekhanika Materialov − Physico-Chemical Mechanics of Materials, vol. 51, no.1, pp. 86–92 [in Russian].
Mirsalimov, V. M., & Mustafayev, A. B. (2015). A contact problem on partial interaction of faces of a variable thickness slot under the influence of temperature field. Mechanika, vol. 21, iss. 1, pp. 19–22.
Mirsalimov, V. M. (2016). Simulation of partial closure of a variable width slot with interfacial bonds in end zones in an isotropic medium. Int. J. Damage Mech., vol. 25, iss. 2, pp. 266–279.
Mir-Salim-zade, M. V. (2016). Zakrytiye shcheli, iskhodyashchey iz kontura krugovogo otverstiya v stringernoy plastine [Closure of a slit originating from the contour of a circular hole in a stringer plate]. Vestn. Chuvash. ped. un-ta im. I .Ya. Yakovleva. Ser. Mekhanika predelnogo sostoyaniya − I. Yakovlev Chuvash State Pedugogical University Bulletin. Series: Mechanics of a Limit State, no. 1(27). , pp. 78–89 [in Russian].
Mir-Salim-zade, M. V. (2016). Chastichnyy kontakt beregov shcheli peremennoy shiriny v podkreplennoy stringerami plastine [Partial contact of variable width slit faces in a plate reinforced by stringer]. Fiziko-khim. Mekhanika Materialov − Physico-Chemical Mechanics of Materials, vol. 52, no. 3, pp. 29–34 [in Russian].
Gasanov, Sh. G. (2017). Resheniye kontaktnoy zadachi dlya ploskosti, oslablennoy shchelyu peremennoy shiriny, v neodnorodnom napryazhennom pole [Solution of the contact problem for a plane weakened by variable width slip in an inhomogeneous stressed field]. Problemy Mashinostroyeniya − Journal of Mechanical Engineering, vol. 20, no. 2, pp. 29–36 [in Russian].
Mir-Salim-zade, M. V. (2017). Contact problem for a stringer plate weakened by a periodic system of variable width slots. Structural Eng. and Mech, vol. 62, no 6. pp. 719–724.
Mustafayev, A. B. (2017). Zamedleniye rosta shcheli peremennoy shiriny pod deystviyem temperaturnogo polya [Slowing growth of a variable width slit under the action of a temperature field]. Prikl. Mekhanika i Tekhn. Fizika − Journal of Applied Mechanics and Technical Physics, vol. 58, no. 1, pp. 168–176 [in Russian].
Muskhelishvili, N. I. (1966). Nekotoryye osnovnyye zadachi matematicheskoy teorii uprugosti [Some basic problems of the mathematical theory of elasticity].Moscow: Nauka, 707 p. [in Russian].
Panasyuk, V. V., Savruk, M. P., & Datsyshin, A. P. (1976). Raspredeleniye napryazheniy okolo treshchin v plastinakh i obolochkakh [Distribution of stresses near cracks in plates and shells]. Kyiv: Nauk. dumka, 444 p. [in Russian].
Ladopoulos, E. G. (2000). Singular Integral Equations, Linear and Non-Linear Theory and its Applications in Science and Engineering.Berlin: Springer Verlag, 552 p.
Muskhelishvili, N. I. (1968). Singulyarnyye integralnyye uravneniya [Singular integral equations].Moscow: Nauka, 512 p. [in Russian].
Mirsalimov, V. M. (1987). Neodnomernyye uprugoplasticheskiye zadachi [Non-dimensional elastic-plastic problems].Moscow: Nauka, 256 p. [in Russian].
Savruk, M. P., & Kazberuk, A. (2017). Stress concentration at notches. Springer International Publishing, 498 p.
Downloads
Published
Issue
Section
License
Copyright (c) 2018 Minavar V. Mir-Salim-zade
This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.
All authors agree with the following conditions:
- The authors reserve the right to claim authorship of their work and transfer to the journal the right of first publication of the work under the license agreement (the agreement).
- Authors have a right to conclude independently additional agreement on non-exclusive spreading the work in the form in which it was published by the jpurnal (for example, to place the work in institution repository or to publish as a part of a monograph), providing a link to the first publication of the work in this journal.
- Journal policy allows authors to place the manuscript in the Internet (for example, in the institution repository or on a personal web sites) both before its submission to the editorial board and during its editorial processing, as this ensures the productive scientific discussion and impact positively on the efficiency and dynamics of citation of published work (see The Effect of Open Access).
