Major Stress-Strain State of Double Support Multilayer Beams Under Concentrated Load. Part 2. Model Implementation and Calculation Results
Keywords:
multilayer beam, orthotropic layer, concentrated load, deflection, stresses, displacementsAbstract
The development of composite technologies contributes to their wide introduction into the practice of designing modern different-purpose structures. Reliable prediction of the stress-strain state of composite elements is one of the conditions for creating reliable structures with optimal parameters. Analytical theories for determining the stress-strain state of multilayer rods (bars, beams) are significantly inferior in development to those for composite plates and shells, although their core structural elements are most common. The purpose of this paper is to design an analytical model for bending double support multilayer beams under a concentrated load, with the model based on the previously obtained elasticity theory solution for a multi-layer cantilever. The second part of the article contains examples of the implementation of the model for bending double-support multi-layer beams under a concentrated load, with the model constructed in the first part of the article. Using this model, solutions to the problems of bending multi-layer beams with different types of fixation of their extreme cross-sections were obtained. The resultant relations were approbated using test problems for determining the deflections of homogeneous composite double-support beams with different combinations of fixation, as well as in determining the stresses and displacements of a four-layer beam with a combination of a rigid and hinged fixation at its ends. The results obtained have a slight discrepancy with the simulation results by the finite element method (FEM) and the calculation by the iterative model for bending composite bars, even for relatively short beams. In addition, it is shown that the neglect of the shear amenability of layer materials results in large errors in determining the deflections, and in the case of statically indefinable beams, reactive forces and stresses. The approach used in the construction of the model can be extended to the case of beams with arbitrary numbers of concentrated forces and intermediate supports, and to calculate multilayer beams with different rigidity of their design sections.References
Altenbakh, K. H. (1998). Osnovnyye napravleniya teorii mnogosloynykh konsyruktsiy. Obzor [Major directions of the theory of multilayer thin-walled structures. Survey]. Mekhanika kompositnykh materialov – Mechanics of composite materials, no. 3, pp. 333–348 (in Russian).
Ambartsumyan, S. A. (1987). Teoriya anizotropnykh plastin [Theory of anisotropic plates].Moscow: Nauka, 360 p. (in Russian).
Bolotin, V. V. & Novichkov, Yu. N. (1980). Mekhanika mnogosloynykh konstruktsi [Mechanics of multilayer structures].Moscow: Mashinostroyeniye, 374 p. (in Russian).
Vasilyev, V. V. (1988). Mekhanika konstruktsiy iz kompozitsionnykh materialov [Mechanics of structures made of composite materials].Moscow: Mashinostroyeniye, 272 p. (in Russian).
Grigolyuk, E. I. & Selezov, I.T. (1972). Neklassicheskaya teoriya kolebaniy sterzhney, plastin i obolochek. Itogi nauki i tekhniki [Non-classical theory of oscillations of rods, plates and shells. Results of science and technology (Vol. 5)].Moscow: Nauka, 271 p. (in Russian).
Guz, A. N., Grigorenko, Ya. M., Vanin, G. A., & BabichI.Yu. (1983). Mekhanika elementov konstruktsiy: V 3 t, T. 2: Mekhanika kompozitnykh materialov i elementov konstruktsiy [Mechanics of structural elements (Vol. 1–3): Mechanics of composite materials and structural elements (Vol. 2)]. Kiyev: Naukova dumka, 484 p. (in Russian).
Malmeyster, A. K., Tamuzh, V. P., & Teters, G. A. (1980). Soprotivleniye polimernykh i kompozitnykh materialov [Resistance of polymeric and composite materials].Riga: Zinatne, 572 p. (in Russian).
Rasskazov, A. O., Sokolovskaya, I.I., & Shulga, N. A. (1987). Teoriya i raschet sloistykh ortotropnykh plastin i obolochek [Theory and calculation of layered orthotropic plates and shells]. Kiyev: Vyshcha shkola, 200 p. (in Russian).
Piskunov, V. G. (2003). Iteratsionnaya analiticheskaya teoriya v mekhanike sloistykh kompozitnykh system [Iterative analytical theory in mechanics of layered composite systems]. Mekhanika kompozit. materialov – Mechanics of Composite Materials, vol. 39, no. 1, pp. 2–24 (in Russian). https://doi.org/10.1023/A:1022979003150
Horyk, O. V., Piskunov, V. H., & Cheredniko, V. M. (2008). Mekhanika deformuvannia kompozytnykh brusiv [Mechanics of deformation of composite beams].Poltava; Kyiv: ASMI, 402 p. (in Ukrainian).
Goryk, A. V. (2001). Modeling transverse compression of cylindrical bodies in bending. Intern. Appl. Mech., vol. 37, iss. 9, pp. 1210–1221. https://doi.org/10.1023/A:1013294701860
Goryk, A. V. & Koval’chuk, S. B. (2018). Elasticity theory solution of the problem on plane bending of a narrow layered cantilever bar by loads at its end. Mech. Composite Materials, vol. 54, iss. 2, pp. 179–190.
Goryk, A. V. & Koval’chuk, S. B. (2018). Solution of a transverse plane bending problem of a laminated cantilever beam under the action of a normal uniform load. Strength of Materials, vol. 50, iss. 3, pp. 406–418. https://doi.org/10.1007/s11223-018-9984-7
Kovalchuk, S. B. & Gorik, A. V. (2018). Major stress-strain state of double support multilayer beams under concentrated load. Part 1. Model construction. J. Mech. Eng., vol. 21, no. 4, pp. 30–36.
Downloads
Published
Issue
Section
License
Copyright (c) 2019 S. B. Kovalchuk, O. V. Goryk
This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.
All authors agree with the following conditions:
- The authors reserve the right to claim authorship of their work and transfer to the journal the right of first publication of the work under the license agreement (the agreement).
- Authors have a right to conclude independently additional agreement on non-exclusive spreading the work in the form in which it was published by the jpurnal (for example, to place the work in institution repository or to publish as a part of a monograph), providing a link to the first publication of the work in this journal.
- Journal policy allows authors to place the manuscript in the Internet (for example, in the institution repository or on a personal web sites) both before its submission to the editorial board and during its editorial processing, as this ensures the productive scientific discussion and impact positively on the efficiency and dynamics of citation of published work (see The Effect of Open Access).
