Analysis of Stress-Strain State and Contact Pressures on Surfaces of Kaplan Runner Blade Bearing Bronze Bushes
Abstract
An analysis of the existing and prospective blade seal designs for Kaplan runners was performed. The selected design type provides the maximum ecological safety for Kaplan runners. A 3D model of runner hub sector with the trunnion, inner and outer bushes of blade trunnion was generated taking into account the cyclic symmetry of the runner design based on the modern automated design engineering system. A diagram of application of external loads from the blade and lever to the given 3D model of the Kaplan runner hub segment was developed. The contact problem was formulated to determine the stress-strain state as well as the contact pressures at the inner and outer bronze bushes of the Kaplan runner blade trunnions in different operating conditions. The problem was formulated for the finite element method, taking into consideration the diagram of external load application and contact restraints to the given 3D model of the Kaplan runner hub sector in the software package for engineering calculations. Using calculation results, principal stress distribution diagrams and the distribution diagram for the contact pressure at the outer and inner bronze bushes of blade trunnions were obtained. Strength calculation results were processed using the data of principal stress distribution diagrams, and the contact pressure values at the inner and outer bronze bushes of blade trunnions were determined. A methodology for further use of the given analytical model in the evaluation of stress-strain state of Kaplan runners involving modern automated design engineering systems and software package for engineering calculations was developed. The comparison of stress-strain states of the blade trunnion bushes was performed for the old and new designs of the Kaplan runner seal.
Downloads
Published
Issue
Section
License
Copyright (c) 2021 В. Г. Субботин, А. С. Бураков, А. В. Душин, В. Н. Ефименко, А. О. Коршунов, О. Н. Хорев
This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.
All authors agree with the following conditions:
- The authors reserve the right to claim authorship of their work and transfer to the journal the right of first publication of the work under the license agreement (the agreement).
- Authors have a right to conclude independently additional agreement on non-exclusive spreading the work in the form in which it was published by the jpurnal (for example, to place the work in institution repository or to publish as a part of a monograph), providing a link to the first publication of the work in this journal.
- Journal policy allows authors to place the manuscript in the Internet (for example, in the institution repository or on a personal web sites) both before its submission to the editorial board and during its editorial processing, as this ensures the productive scientific discussion and impact positively on the efficiency and dynamics of citation of published work (see The Effect of Open Access).
