Development of a mineral binding material with elevated content of red mud

Authors

DOI:

https://doi.org/10.15587/2312-8372.2017.105609

Keywords:

red mud, technogenic raw material for the production of binding material, phase composition

Abstract

The object of present research is the technology of production of mineral binding materials of low-temperature (Tmax=1100 ºC) roasting of the romancement type with maximal possible use of waste from alumina production – red mud as a technogenic raw material. We employed as research methods a combination of computer calculations using the new software, modern physical-chemical methods of analysis and standardized testing of the properties of raw materials and binding materials.

Based on computer calculations, applying the developed software «RomanCem», we performed analysis of dependence of the concentration of red mud in 3-component blends on the number of hydraulic module of the binder NM=1.1–1.7. We determined compositions of blends containing red mud of 27.0–27.5 % by weight (versus 3–5 % by weight in the technology of Portland cement) for the production of a hydraulic mineral binder at a maximum temperature of roasting 1100 ºC (versus 1400–1450 ºC for Portland cement) with improved indicators of strength at 18–22 MPa (versus 5–10 MPa for romancement). Effectiveness of our technique is defined by a comprehensive solution to the issues of ecology (due to reducing the volumes of waste accumulation), resource saving (through a replacement with waste of part of the raw materials of natural origin), and technology of binders (due to obtaining a product of the romancement type with improved indicators of properties). We demonstrated the features of phase composition and properties of the binders based on the systems of carbonate component with polymineral clay, quartz powder and red mud.

Author Biographies

Lev Cherniak, National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute», 37, Peremogy ave., Kyiv, Ukraine, 03056

Doctor of Technical Science, Professor

Department of Chemical Technology of Composite Materials

Petro Varshavets, Ltd. «Fasade Klinker», 160, Kirillovskaya (Frunze) str., Kyiv, Ukraine, 04073

PhD, General Director

Nataliia Dorogan, National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute», 37, Peremogy ave., Kyiv, Ukraine, 03056

PhD, Assistant

Department of Chemical Technology of Composite Materials

References

  1. Butt, Yu. M., Sychev, M. M., Timashev, V. V. (1980). Himicheskaia tehnologiia viazhushchih materialov. Moscow: Vysshaia shkola, 460.
  2. Duda, W. H. (1988). Cement Data Book, Volume 3: Raw Material for Cement Production. French & European Pubns, 188.
  3. Shelonh, H., Sanytskyi, M. A., Kropyvnytska, T. P., Kotiv, R. M. (2012). Romantsement – viazhuche dlia oporiadzhuvalnykh robit v budivnytstvi. Stroitel'nye materialy i izdeliia, 1 (72), 7–12.
  4. Klisinska-Kopacz, A., Tislova, R. (2013). The Effect of Composition of Roman Cement Repair Mortars on Their Salt Crystallization Resistance and Adhesion. Procedia Engineering, 57, 565–571. doi:10.1016/j.proeng.2013.04.072
  5. Pashchenko, A. A., Serbii, V. P., Starchevskaia, V. A. (1985). Viazhushchie materialy. Kyiv: Vishcha shkola, 440.
  6. Volzhenskii, A. V. (1986). Mineral'nye viazhushchie veshchestva. Moscow: Stroiizdat, 463.
  7. Udachkin, I. B., Pashchenko, A. A., Cherniak, L. P. et al. (1988). Kompleksnoe razvitie syr'evoi bazy promyshlennosti stroitel'nyh materialov. Kyiv: Budіvelnik, 104.
  8. Mossur, P. M., Negoda, S. V. (2007). Tehnogennoe mineral'noe syr'e i ego ispol'zovanie v Ukraine. GIAB, 6, 299–307.
  9. Pashchenko, A. A., Miasnikova, E. A., Evsiutin, E. R. (1990). Energosberegaiushchie i bezothodnye tehnologii polucheniia viazhushchih veshchestv. Kyiv: Vishcha shkola, 223.
  10. Klassen, V. K., Borisov, I. N., Manuilov, V. E.; In: Klassen, V. K. (2008). Tehnogennye materialy v proizvodstve tsementa. Belgorod: BSTU, 126.
  11. Utkov, V. A., Patsei, A. V., Kazakov, E. I. (1983). Perspektivy razvitiia sposobov pererabotki i ispol'zovaniia krasnyh shlamov v SSSR i za rubezhom. Moscow: TsNIItsvetmet ekonomiki i informatsii, 32.
  12. Sutar, H. (2014). Progress of Red Mud Utilization: An Overview. American Chemical Science Journal, 4 (3), 255–279. doi:10.9734/acsj/2014/7258
  13. Ritter, S. K. (2014). Making The Most Of Red Mud. Chemical & Engineering News Archive, 92 (8), 33–35. doi:10.1021/cen-09208-scitech1
  14. Samal, S., Ray, A. K., Bandopadhyay, A. (2013). Proposal for resources, utilization and processes of red mud in India – A review. International Journal of Mineral Processing, 118, 43–55. doi:10.1016/j.minpro.2012.11.001
  15. Senff, L., Modolo, R. C. E., Silva, A. S., Ferreira, V. M., Hotza, D., Labrincha, J. A. (2014). Influence of red mud addition on rheological behavior and hardened properties of mortars. Construction and Building Materials, 65, 84–91. doi:10.1016/j.conbuildmat.2014.04.104
  16. Wang, P., Liu, D.-Y. (2012). Physical and Chemical Properties of Sintering Red Mud and Bayer Red Mud and the Implications for Beneficial Utilization. Materials, 5 (12), 1800–1810. doi:10.3390/ma5101800
  17. Sai, V. I., Cherniak, L. P. (1985). Sovershenstvovanie tehnologii stroitel'noi keramiki. Kyiv: Znanie, 22.
  18. Cherniak, L. P., Komskii, G. Z., Trubachev, V. I. (1986). Keramicheskie otdelochnye materialy na osnove zhelezosoderzhashchih othodov promyshlennosti. Proizvodstvo i primenenie effektivnyh otdelochnyh materialov v stroitel'stve. Leningrad: Znanie, 44–48.
  19. Liu, X., Zhang, N. (2011). Utilization of red mud in cement production: a review. Waste Management & Research, 29 (10), 1053–1063. doi:10.1177/0734242x11407653
  20. Ribeiro, D. V., Labrincha, J. A., Morelli, M. R. (2011). Potential use of natural red mud as pozzolan for Portland cement. Materials Research, 14 (1), 60–66. doi:10.1590/s1516-14392011005000001
  21. Yang, X., Zhao, J., Li, H., Zhao, P., Chen, Q. (2017). Recycling red mud from the production of aluminium as a red cement-based mortar. Waste Management & Research, 35 (5), 500–507. doi:10.1177/0734242x16684386
  22. Sviderskyi, V. A., Cherniak, L. P., Dorohan, N. O.; applicant: National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute». (30.05.2013). Kompiuterna prohrama «KLINKER». Patent Application.
  23. Sviderskyi, V. A., Cherniak, L. P., Dorohan, N. O., Soroka, A. S. (2014). Prohramne zabezpechennia tekhnolohii portlandtsementu. Stroitel'nye materialy i izdeliia, 1 (84), 16–17.
  24. Sviderskyi, V. A., Cherniak, L. P., Sanhinova, O. V., Dorohan, N. O., Tsybenko, M. Yu. (2017). Prohramne zabezpechennia tekhnolohii nyzkotemperaturnykh viazhuchykh materialiv. Stroitel'nye materialy i izdeliia, 1–2 (93), 22–24.
  25. DSTU B V.2.7-91-99. Viazhuchi mineralni. Klasyfikatsiia. (1999). Introduced: 01.03.1999. Kyiv: Derzhbud Ukrainy, 26

Downloads

Published

2017-05-30

How to Cite

Cherniak, L., Varshavets, P., & Dorogan, N. (2017). Development of a mineral binding material with elevated content of red mud. Technology Audit and Production Reserves, 3(3(35), 22–28. https://doi.org/10.15587/2312-8372.2017.105609

Issue

Vol. 3 No. 3(35) (2017): Chemical Engineering

Section

Chemical and Technological Systems: Original Research

License

Copyright (c) 2017 Petro Varshavets, Lev Cherniak, Nataliia Dorogan

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.