Analysis of the photocatalytic activity of TiO2 coating on a glass as a criterion of its ability to self-cleaning

Authors

  • Mykola Plemyannikov National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute», 37, Peremohy ave., Kyiv, Ukraine, 03056, Ukraine https://orcid.org/0000-0003-4756-3540

DOI:

https://doi.org/10.15587/2312-8372.2019.188072

Keywords:

photocatalytic reactor, methylene blue, UV radiation, photocatalysis, spectral analysis, discoloration, color diagram

Abstract

The object of research is the process of photocatalytic degradation of methylene blue on glass coated with titanium oxide under the influence of ultraviolet radiation (UV radiation). The study aims to indirectly assess the ability of glasses to self-clean. An axiomatic assumption is made about the correlation between self-cleaning ability and photocatalytic activity.

The proprietary photocatalytic reactor is used. This is a cylindrical quartz glass cavity in the form of a glass, on the inner surface of which a photocatalytic coating of titanium oxide is preliminarily applied. The cavity of the glass is filled with a solution of methylene blue. Externally, the glass is irradiated with a mercury-quartz lamp. UV radiation passes unhindered through quartz glass and activates photocatalytic coatings on the back side. To activate the process requires the participation of atmospheric oxygen. To do this, the solution is bubbled with air from a perforated annular tubular collector located at the bottom of the glass.

The solution of methylene blue after various exposure times is subjected to spectral analysis. The kinetics of dye degradation is estimated by the photocolorimetric method with a decrease in the intensity of the characteristic absorption band of methylene blue. The bleaching process is clearly demonstrated on the color chart.

The novelty of the proposed scheme for the functioning of the photocatalytic reactor is that UV radiation activates the coatings acting on it from the side of the inner interface: quartz glass coating. Electron-hole pairs migrate to the surface and, under conditions of contact with oxygen, carry out the photocatalysis of the model solution. Such a design of the photocatalytic reactor device compares favorably with the known ones because UV radiation does not pass through the studied model fluid. This excludes the possibility of their interaction, may introduce an error in the final results.

Author Biography

Mykola Plemyannikov, National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute», 37, Peremohy ave., Kyiv, Ukraine, 03056

PhD, Professor

Department of Chemical Technology of Ceramics and Glass

References

  1. Plemyannikov, М., Korniiovych, В. (2019). Рreparation of a self-cleaning glass using solutions of titanium fluor complexes. Technology audit and production reserves, 5 (3 (49)), 5–9. doi: http://doi.org/10.15587/2312-8372.2019.181546
  2. Shahrezaei, F., Mansouri, Y., Zinatizadeh, A. A. L., Akhbari, A. (2012). Photocatalytic Degradation of Aniline Using TiO2Nanoparticles in a Vertical Circulating Photocatalytic Reactor. International Journal of Photoenergy, 2012, 1–8. doi: http://doi.org/10.1155/2012/430638
  3. Azevedo, E. B., Tôrres, A. R., Aquino Neto, F. R., Dezotti, M. (2009). TiO2-Photocatalyzed degradation of phenol in saline media in an annular reactor: hydrodynamics, lumped kinetics, intermediates, and acute toxicity. Brazilian Journal of Chemical Engineering, 26 (1), 75–87. doi: http://doi.org/10.1590/s0104-66322009000100008
  4. Hirose, F., Kurita, M., Kimura, Y., Niwano, M. (2006). Photocatalytic oxidation of natural organic adsorbates on anatase TiO 2 films observed by infrared adsorption spectroscopy with a multiple internal reflection geometry. Applied Surface Science, 253 (4), 1912–1916. doi: http://doi.org/10.1016/j.apsusc.2006.03.039
  5. Jang, S.-J., Kim, M.-S., Kim, B.-W. (2004). Photodegradation of Reactive Black-5 inPhotoreactors using ТiO2 Immobilized on a Glass Tube. Journal of Industrial and Engineering Chemistry 10 (4), 544–550.
  6. Ling, C. M., Mohamed, A. R., Bhatia, S. (2004). Performance of photocatalytic reactors using immobilized TiO2 film for the degradation of phenol and methylene blue dye present in water stream. Chemosphere, 57 (7), 547–554. doi: http://doi.org/10.1016/j.chemosphere.2004.07.011
  7. O’Neal Tugaoen, H., Garcia-Segura, S., Hristovski, K., Westerhoff, P. (2018). Compact light-emitting diode optical fiber immobilized TiO2 reactor for photocatalytic water treatment. Science of The Total Environment, 613-614, 1331–1338. doi: http://doi.org/10.1016/j.scitotenv.2017.09.242
  8. Damodar, R.-A., You, S.-J., Chiou, G.-W. (2012). Investigation on the conditions mitigating membrane fouling caused by TiO2 deposition in a membrane photocatalytic reactor (MPR) used for dye wastewater treatment. Journal of Hazardous Materials, 203-204, 348–356. doi: http://doi.org/10.1016/j.jhazmat.2011.12.027
  9. Kabir, M. F., Vaisman, E., Langford, C. H., Kantzas, A. (2006). Effects of hydrogen peroxide in a fluidized bed photocatalytic reactor for wastewater purification. Chemical Engineering Journal, 118 (3), 207–212. doi: http://doi.org/10.1016/j.cej.2006.02.003
  10. Montañez, J. P., Gómez, S., Santiago, A. N., Pierella, L. B. (2015). TiO2Supported on HZSM-11 Zeolite as Efficient Catalyst for the Photodegradation of Chlorobenzoic Acids. Journal of the Brazilian Chemical Society, 26 (6). doi: http://doi.org/10.5935/0103-5053.20150083

Published

2019-11-21

How to Cite

Plemyannikov, M. (2019). Analysis of the photocatalytic activity of TiO2 coating on a glass as a criterion of its ability to self-cleaning. Technology Audit and Production Reserves, 6(1(50), 14–17. https://doi.org/10.15587/2312-8372.2019.188072

Issue

Section

Reports on research projects