Selection of catalysts for the process of oxidative condensation of methane using the intelligent decision support system

Authors

DOI:

https://doi.org/10.15587/2312-8372.2020.198335

Keywords:

catalyst selectivity, environmental efficiency, data mining, hierarchy analysis method, decision trees, computer modeling

Abstract

Since most chemical processes are catalytic; the problem of the choice of catalysts is traditionally considered in many publications and is covered on many Internet sites. In this paper; the catalytic process of methane oxidative condensation and intelligent technologies for analysis and decision making for choosing the best catalyst option are considered as an object of research. The authors of the work consider many literature and Internet sources; which highlight the problems of the choice of catalysts in general; and indeed for the methane oxidative condensation. As a result of studying numerous sources; the authors determine that the tasks associated with choosing the best catalyst in each case are often very ambiguous and complex. Therefore; any informational support in solving problems related to the choice of catalysts will be useful. A large amount of information; the attraction of modern computer technology and the knowledge of qualified experts; all this makes the creation of an intelligent decision support system an important and real task.

This work is aimed at developing an intelligent decision support system to select the most effective catalyst for the methane oxidative condensation.

The methods chosen in the decision-making system are the hierarchy analysis method and data mining based on decision trees. The first of them requires the participation of a human expert; the second performs data mining without the participation of a specialist. It should be noted that the choice of the latter is also due to the fact that methods based on decision trees are among the top ten in terms of their effectiveness for data mining.

For computer implementation of the system; object-oriented programming based on Microsoft Visual Studio is used.

In the course of the study; in addition to the choice of catalysts using the developed decision-making system; a computer simulation of the methane oxidative condensation using the selected catalysts is carried out and the best version of the scheme is chosen. The obtained results can be useful at the design and implementation stages of the corresponding production; as well as used by process operators to analyze the production process.

Author Biographies

Liudmyla Bugaieva, National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute», 37, Peremohy ave., Kyiv, Ukraine, 03056

PhD, Associate Professor

Department of Cybernetics Chemical Technology Processes

Dmytriy Shahan, National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute», 37, Peremohy ave., Kyiv, Ukraine, 03056

Department of Cybernetics Chemical Technology Processes

Yurii Beznosyk, National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute», 37, Peremohy ave., Kyiv, Ukraine, 03056

PhD, Associate Professor

Department of Cybernetics Chemical Technology Processes

References

  1. Shagan, D. V., Bugaieva L. M. (2018). Intelligent decision support system for selecting catalyst of the oxidative coupling of methane process. Modeling and simulation for chemistry and technologies and sustainable development systems – MSCT-2018. Kyiv: Kyiv Polytechnic Institute, 70-72.
  2. Van der Grift (2017). How to select the best refinery catalyst for your process. Catalyst Specialist. Available at: http://www.catalyst-intelligence.com/blog/how-to-select-the-best-catalyst-for-your-process
  3. Thomas, S. J. M., Leary, R. K. (2016). On choosing the most appropriate catalysts for the conversion of carbon dioxide to fuels and other commodities, and on the environmentally benign processing of renewable and nonrenewable feedstocks. Applied Petrochemical Research, 6 (3), 167–182. doi: http://doi.org/10.1007/s13203-016-0167-9
  4. Eletsky, P. M., Mironenko, O. O., Selishcheva, S. A., Yakovlev, V. A. (2016). Investigation of the Process of Catalytic Steam Cracking of Heavy Oil in the Presence of Disperse Catalysts. Part 1. The Choice of Optimal Operation Conditions for Steam Reforming in the Absence of the Catalyst. Kataliz v Promyshlennosti, 16 (1), 50–56. doi: http://doi.org/10.18412/1816-0387-2016-1-50-56
  5. Chandler, D. L. (2011). How to choose a catalyst. MIT News. Available at: http://news.mit.edu/2011/battery-principle-0613
  6. Catalysts Selection Guide (2014). Anco Catalysts Ltd. Available at: http://ancocatalysts.com/catalyst_selection_guide.html
  7. Krylov, О. V. (2014). Geterogennii kataliz. Moscow: Akademkniga, 679.
  8. Dedov, А. G., Loktev, А. S., Telpukhovskaia, N. О., Parkhomenko, K. V., Gerashchenko, M. V., Moiseev, I. I. (2010). Oxidative Condensation of Methane in the Presence of Lanthanum-Cerium Catalysts: The Fundamental Character of the Effect of Nonadditivity. Chemistry and Technology of Fuels and Oils, 2 (558), 43-46.
  9. Dedov, A. G., Loktev, A. S., Golikov, S. D., Spesivtsev, N. A., Moiseev, I. I., Nipan, G. D., Dorokhov, S. N. (2015). Oxidative coupling of methane to form ethylene: Effect of the preparation method on the phase composition and catalytic properties of Li-W-Mn-O-SiO2 composite materials. Petroleum Chemistry, 55, 2, 163–168. doi: http://doi.org/10.7868/s0028242115020069
  10. Fini, T., Patz, C., Wentzel, R. (2014). Oxidative Coupling of Methane to Ethylene. Senior Design Reports, 268.
  11. Thybaut, J. W., Marin, G. B., Mirodatos, C., Schuurman, Y., van Veen, A. C., Sadykov, V. A. et. al. (2014). A Novel Technology for Natural Gas Conversion by Means of Integrated Oxidative Coupling and Dry Reforming of Methane. Chemie Ingenieur Technik, 86 (11), 1855–1870. doi: http://doi.org/10.1002/cite.201400068
  12. Alexiadis, V. I., Chaar, M., van Veen, A., Muhler, M., Thybaut, J. W., Marin, G. B. (2016). Quantitative screening of an extended oxidative coupling of methane catalyst library. Applied Catalysis B: Environmental, 199, 252–259. doi: http://doi.org/10.1016/j.apcatb.2016.06.019
  13. Son, N. X. (2014). Ethylene Production by Oxidative Coupling of Methane: New Process Flow Diagram Based on Adsorptive Separation. Berlin, 142.
  14. Zakharchuk, Y., Beznosyk, Y., Bugaieva, L. (2018). Mathematical model of obtaining a hydrocarbon fuel based on the fischer­tropsch pathway in a stationary layer of the cobalt­based catalyst. Eastern-European Journal of Enterprise Technologies, 3 (6 (93)), 60–70. doi: http://doi.org/10.15587/1729-4061.2018.134165
  15. Siluria Announces One Year of Successful Operations of its Disruptive Ethylene Technology. Available at: http://www.prnewswire.com/news-releases/siluria-announces-one-year-of-successful-operations-of-its-disruptive-ethylene-technology-300266816.html
  16. Bullis, K. (2014). Chasing the Dream of Half-Price Gasoline from Natural Gas. Available at: https://www.technologyreview.com/s/523146/chasing-the-dream-of-half-price-gasoline-from-natural-gas/
  17. Decision support system. Available at: https://en.wikipedia.org/wiki/Decision_support_system
  18. Saati T. (1993). Prinyatie resheniy. Metod analiza ierarkhiy. Moscow: Radio i svyaz, 278
  19. Bugaieva, L. М., Bojko, Т. V., Beznosyk, Yu. О. (2017). Systemnyi analiz chimiko-tekhnologichnykh kompleksiv. Kyiv: Interservis, 254.

Published

2019-12-24

How to Cite

Bugaieva, L., Shahan, D., & Beznosyk, Y. (2019). Selection of catalysts for the process of oxidative condensation of methane using the intelligent decision support system. Technology Audit and Production Reserves, 1(3(51), 4–10. https://doi.org/10.15587/2312-8372.2020.198335

Issue

Section

Chemical and Technological Systems: Original Research