Substantiation of conditions of maintaining stability of haulage drifts during development of steep seams
DOI:
https://doi.org/10.15587/2706-5448.2020.206009Keywords:
rock pressure, haulage drift, protection methods, treatment works, rolling bonfires, coal pillars.Abstract
The object of research is the processes of ensuring the stability of lateral rocks in haulage drifts during the development of steep coal seams. With an increase in the depth of mining, the applied methods of protecting local preparatory excavations should ensure their operational condition in the excavated areas and correspond to changing mining and geological conditions within the mine field. Investigations of the manifestations of rock pressure in haulage drifts along the length of the excavation section are performed under field conditions. At specially equipped metering stations, the displacement of the lateral rocks on the preparatory excavation circuit is determined. The haulage drift is protected by rolling bonfires made of wooden sleepers or coal pillars. In the course of research, the influence of the stiffness of protection structures on the stability of lateral rocks in the haulage drift is established. A linear relationship is recorded between the displacements of the roof rocks and the load on the lining in the excavation along the length of the excavation section while protecting the haulage drift by the coal pillars. At the same time, with a decrease in the stiffness of the pillars by 80 %, the section of the haulage drift decreases by 50 % from the initial one. It is noted that the use of wooden structures for protection structures allows to limit the displacement of rocks on the contour of the haulage drift. As a result of the interaction of lateral rocks with wooden protection structures, with a decrease in their stiffness by 80 %, the section of the haulage drift decreases by 30–35 % from the initial one. Studies have shown that the reduction in the stiffness of wooden structures occurs due to their compression, and the coal pillars – as a result of destruction. It is noted that the most difficult conditions for maintaining haulage drifts are formed when using coal pillars. It is recommended, to ensure the stability of local preparatory workings, the use of compliant protection structures or the laying of excavated space. The obtained research results can be used when choosing a method for protecting haulage drifts on steep coal seamsReferences
- Selezen, A. L., Tomasov, A. G., Andrushko, V. F. (1977). Podderzhanie podgotovitelnykh vyrabotok pri razrabotke krutykh plastov. Moscow: Nedra, 205.
- Hartman, H. L. (1987). Introductory Mining Engineering. Wiley- Interscience Publication, 622.
- Koshelev, K. V., Petrenko, Iu. A., Novikov, A. O. (1990). Okhrana i remont gornykh vyrabotok. Moscow: Nedra, 256.
- Liashok, Y., Iordanov, I., Chepiga, D., Podkopaiev, S. (2018). Experimental studies of the seam openings competence in different methods of protection under pitch and steep coal seams development. Mining of Mineral Deposits, 12 (4), 9–19. doi: http://doi.org/10.15407/mining12.04.009
- Zhukov, V. E. (2001). Ob odnoi strategicheskoi oshibke v razreshenii problemy razrabotki krutykh plastov. Ugol Ukrainy, 7, 6–10.
- Abzalov, M. (2016). Applied Mining Geology. Cham: Springer, 448. doi: http://doi.org/10.1007/978-3-319-39264-6
- Iordanov I. V., Simonova Yu. I., Polozhy A. V., Podkopayev Ye. S., Skyrda A. Ye., Kayun A. P. (2020). A comprehensive study of the stability of lateral rocks with a supple support. World Science, 1 (1 (53)), 4–17. doi: http://doi.org/10.31435/rsglobal_ws/31012020/6889
- Bondarenko, V., Kovalevska, J., Ganushevych, K., Russkikh, V. (2014). Basic concepts of minerals mining technology. Dnipropetrovsk: Lizunoff Press, 428.
- Abramovich, F., Ritov, Y. (2013). Statistical Thery: A Concice Introduction. Hoboken: CRc.Press, 214.
- Cox, D. R., Hinkley, D. V. (2017). Theoretical statistics. Boca Raton: CRc Press, 525.
- Coman, C. D. (2020). Continuum Mechanics and Linear Elas ticity: An Applied Methematics Introduction. Springer, 528. doi: http://doi.org/10.1007/978-94-024-1771-5
- Slaughter, W. S. (2002). The Linearized Theory of Elasticity. Springer Science + Business media, LLC, 556.
- Bedford, A., Liechti, K. M. (2020). Mechanics of Materials. Springer, 1023. doi: http://doi.org/10.1007/978-3-030-22082-2
- Philpot, T. A. (2012). Mechanics of Materials: An Integrated Learning System. Wiley, 1896.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2020 Igor Iordanov, Yuliia Simonova, Yuliia Novikova, Anton Korol, Yevgen Podkopayev, Oleksiy Kayun
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.