Regulatory support for dismantling technologies of interference joints

Authors

  • Анна Алексеевна Павлова Ukrainian Engineering and Pedagogical Academy Str. University, 16, Kharkov, Ukraine, 61003, Ukraine
  • Анна Николаевна Лагода Ukrainian Engineering Pedagogics Academy, Str. University, 16, Kharkov, Ukraine, 61003, Ukraine

DOI:

https://doi.org/10.15587/2312-8372.2014.21610

Keywords:

regulatory support, joints classification, technological disassembly operations, induction heating

Abstract

Regulatory support for dismantling technologies of interference joints using thermal influence, namely, induction heating is considered in the paper. Some results of our research in this field are presented. The main purpose of the research is to develop the principles for creating regulatory support for unified disassembly technologies, allowing to obtain high-quality products for machine-building repair industries. Using modern standardization tools and methods allows to create the basis for regulatory support in the form of products classifier; unified operations; catalog of heaters, coppesponding to groups of heated products and interrelated by limiting parameters. The principles of creating regulatory support for dismantling technologies of interference joints based on the developed schemes of classification parameters of parts, joints and manufacturing disassembly operations using induction heating, as well as classifications of induction-heating equipment with determining limiting parameters, which are the link between them are proposed. Using the research results will allow to create uniform organically linked standardization and unification system of the technological production system for repair organizations and machine building enterprises

Author Biographies

Анна Алексеевна Павлова, Ukrainian Engineering and Pedagogical Academy Str. University, 16, Kharkov, Ukraine, 61003

Ph.D., Associate Professor

Department of integrated technologies in mechanical engineering and welding

Анна Николаевна Лагода, Ukrainian Engineering Pedagogics Academy, Str. University, 16, Kharkov, Ukraine, 61003

Assistant

Department of integrated technologies in mechanical engineering and welding

References

  1. Зенкин, А. С. Сборка неподвижных соединений термическими методами [Текст]/ А. С. Зенкин, Б. М. Арпентьев. – М.: Машиностроение. – 1987. – 128 с.
  2. Митрофанова, С. П. Организационно-технологическое проектирование ГПС [Текст] / С. П. Митрофанова. – Л.: Машиностроение. – 1986. – 293 с.
  3. Rychlik, I. Probability and Risk Analysis: An Introduction for Engineers [Text] / I. Rychlik, J. Ryden. – Springer, 2006. – 281 p.
  4. Juran, J. M. Juran's Quality Handbook [Text] / J. M. Juran. – Ed. 5. – McGraw-Hill Professional, 2000. – 1730 p.
  5. Трусов, А. Н. Разработка технологического классификатора сборочных единиц группового сборочного производства [Текст] / А. Н. Трусов // Вестник Кусб.гос.тех.инст. – 1998. – №3. – С. 100-103.
  6. Иллюстрированный определитель деталей общемашиностроительного применения [Текст]: руководящий технический материал. – Издательство стандартов, 1977. – 240 с.
  7. Лагода, А. Классификация соединений, технологических операций и оборудования для построения технологических процессов [Текст] / А. Лагода, Б. Арпентьев // Восточно-Европейский журнал передовых технологий. – 2006. – № 3/2(21) . – С. 74-77.
  8. Павлова, А. А. Нормативное обеспечение технологий тепловой сборки соединений с натягом [Текст]: монография. – Харьков: Украинская инженерно-педагогическая академия, 2013. – 118 с.
  9. Лагода, А. Н. Проблема создания нормативного обеспечения ремонтных технологий [Текст] / А. Н. Лагода, А. А. Павлова // Машинобудування. – 2010. – № 5. – С. 115-123.
  10. Коваленко, И. В. Индукционные установки для разборки ответственных соединенийю [Текст] / И. В. Коваленко // Високі технології в машинобудуванні. – Харків: НТУ «ХПІ», 2004. – №2. – С. 105-110.
  11. Слухоцкий, А. Е. Индукторы для индукционного нагрева [Текст] / А. Е Слухоцкий, С. Е. Рыскин. – Л.: Энергия, 1974. – 264 с.
  12. Zenkyn, A. S., Arpentev, B. M. (1987). Sborka nepodvyzhnykh soedynenyi termycheskymy metodamy. M.: Mashynostroenye, 128.
  13. Mytrofanov, S. P. (1986). Orhanyzatsyonno-tekhnolohycheskoe proektyrovanye HPS. L.: Mashynostroenye, 293.
  14. Rychlik, I., Ryden, J. (2006). Probability and Risk Analysis: An Introduction for Engineers. Springer, 281.
  15. Juran, J. M. (2000). Juran's Quality Handbook. Ed. 5. McGraw-Hill Professional, 1730.
  16. Trusov, A. N. (1998). Razrabotka tekhnolohycheskoho klassyfykatora sborochnыkh edynyts hruppovoho sborochnoho proyzvodstva. Vestnyk Kusb.hos.tekh.ynst., 3, 100-103.
  17. Rukovodiashchyi tekhnycheskyi materyal. (1977). Ylliustryrovannyi opredelytel detalei obshchemashynostroytelnoho prymenenyia. Yzdatelstvo standartov, 240.
  18. Lahoda, A., Arpentev, B. (2006). Klassyfykatsyia soedynenyi, tekhnolohycheskykh operatsyi y oborudovanyia dlia postroenyia tekhnolohycheskykh protsessov. Eastern-European Journal Of Enterprise Technologies, 3(2(21)), 74-77.
  19. Pavlova, A. A. (2013). Normatyvnoe obespechenye tekhnolohyi teplovoi sborky soedynenyi s natiahom. Kharkov: UEPA, 118.
  20. Lahoda, A. N., Pavlova, A. A. (2010). Problema sozdanyia normatyvnoho obespechenyia remontnykh tekhnolohyi. Mashynobuduvannia, 5, 115-123.
  21. Kovalenko, Y. V. (2004). Ynduktsyonnыe ustanovky dlia razborky otvetstvennykh soedynenyi. Vysoki tekhnolohii v mashynobuduvanni, 2, 105-110.
  22. Slukhotskyi, A. E., Ryskyn, S. E. (1974). Ynduktory dlia ynduktsyonnoho nahreva. L.: Эnerhyia, 264.

Downloads

Published

2014-02-06

How to Cite

Павлова, А. А., & Лагода, А. Н. (2014). Regulatory support for dismantling technologies of interference joints. Technology Audit and Production Reserves, 1(3(15), 36–38. https://doi.org/10.15587/2312-8372.2014.21610

Issue

Vol. 1 No. 3(15) (2014): Quality of technologies - quality of life for

Section

Quality of processes and products

License

Copyright (c) 2016 Анна Алексеевна Павлова, Анна Николаевна Лагода

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.