Research into the process of carbonate conversion of phosphogypsum in the water media
DOI:
https://doi.org/10.15587/2706-5448.2021.235243Keywords:
carbonate conversion phosphogypsum, sodium hydroxide, calcium hydroxide, carbon dioxide, carbonization, X-ray phase analysis, mass spectrometry, conversion temperature, mineralogical compositionAbstract
For a long time, the problem of phosphogypsum disposal was not given due attention, which led to the accumulation of huge reserves of this environmentally hazardous waste. Transportation of phosphogypsum in dumps and its storage requires significant capital investment and operating costs, as well as the allocation of large land areas. The storage of phosphogypsum harms the environment, as it leads to the entry of significant amounts of toxic substances into groundwater and the atmosphere. The object of the study was phosphogypsum, which is formed during the production of phosphoric acid from apatites and phosphorites. To date, numerous studies have focused on finding effective ways to use phosphogypsum, but its composition usually limits its reuse. The research aims to study the scientific prerequisites for creating an effective control scheme for phosphogypsum by converting it to calcium carbonate. For this purpose, the chemical composition and technological parameters of phosphogypsum conversion from the dumps of «Dnipro Mineral Fertilizer Plant» (Kamianske, Ukraine) were studied. The proposed conversion method involved a reaction between phosphogypsum and aqueous NaOH solution to form Ca(OH)2, which was converted to CaCO3 by carbonization in a CO2 stream. The influence of temperature on the conversion of phosphogypsum into Ca(OH)2 has been established. The conversion was investigated at 25 °C, 40 °C, and 70 °C for 3 hours. It was found that at the first stage of the process the impurities contained in phosphogypsum were transferred to the precipitate of Ca(OH)2. As a result of carbonization, low-quality CaCO3 was obtained, which contained more than 10% of impurities. Increasing the duration of carbonization to 1 hour allowed to obtain CaCO3 with content of Ca(OH)2<4 %. The results of the study show that the method of carbonate conversion of phosphogypsum requires further optimization of technological parameters to improve the purity of the finished product.
References
- Kovalenko, H. D., Durasova, N. S. (2015). Otsinka radiatsiinoi nebezpeky khvostoskhovyshch Prydniprovskoho khimichnoho zavodu dlia naselennia. Yaderna ta radiatsiina bezpeka, 3 (67), 49–53. Available at: http://nbuv.gov.ua/UJRN/ydpb_2015_3_11
- Nazarenko, O., Ivanchenko, A. (2020). Research on technology of complex processing of phosphogypsum. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 5, 109–114. doi: http://doi.org/10.33271/nvngu/2020-5/109
- Walawalkar, M., Nichol, C. K., Azimi, G. (2016). Process investigation of the acid leaching of rare earth elements from phosphogypsum using HCl, HNO3, and H2SO4. Hydrometallurgy, 166, 195–204. doi: http://doi.org/10.1016/j.hydromet.2016.06.008
- Rashad, A. M. (2017). Phosphogypsum as a construction material. Journal of Cleaner Production, 166, 732–743. doi: http://doi.org/10.1016/j.jclepro.2017.08.049
- Saadaoui, E., Ghazel, N., Ben Romdhane, C., Massoudi, N. (2017). Phosphogypsum: potential uses and problems – a review. International Journal of Environmental Studies, 74 (4), 558–567. doi: http://doi.org/10.1080/00207233.2017.1330582
- Wang, J. (2020). Utilization effects and environmental risks of phosphogypsum in agriculture: A review. Journal of Cleaner Production, 276, 123337. doi: http://doi.org/10.1016/j.jclepro.2020.123337
- Lin, J., Sun, W., Desmarais, J., Chen, N., Feng, R., Zhang, P. et. al. (2018). Uptake and speciation of uranium in synthetic gypsum (CaSO 4 •2H 2 O): Applications to radioactive mine tailings. Journal of Environmental Radioactivity, 181, 8–17. doi: http://doi.org/10.1016/j.jenvrad.2017.10.010
- Masmoudi-Soussi, A., Hammas-Nasri, I., Horchani-Naifer, K., Férid, M. (2020). Rare earths recovery by fractional precipitation from a sulfuric leach liquor obtained after phosphogypsum processing. Hydrometallurgy, 191, 105253. doi: http://doi.org/10.1016/j.hydromet.2020.105253
- Hammas-Nasri, I., Horchani-Naifer, K., Férid, M., Barca, D. (2019). Production of a rare earths concentrate after phosphogypsum treatment with dietary NaCl and Na2CO3 solutions. Minerals Engineering, 132, 169–174. doi: http://doi.org/10.1016/j.mineng.2018.12.013
- Cárdenas-Escudero, C., Morales-Flórez, V., Pérez-López, R., Santos, A., Esquivias, L. (2011). Procedure to use phosphogypsum industrial waste for mineral CO2 sequestration. Journal of Hazardous Materials, 196, 431–435. doi: http://doi.org/10.1016/j.jhazmat.2011.09.039
- Levenets, V. V., Azhazha, V. M. (1999). Primenenie yaderno-fizicheskikh metodov dlya elementnogo analiza veschestva. ISPM-7. Fizicheskie i yaderno-fizicheskie metody analiza, 7, 138–141.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Dmytro Yelatontsev
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.