The development of gradient coatings for linings of braking devices

Authors

DOI:

https://doi.org/10.15587/2312-8372.2014.26208

Keywords:

braking devices, eutectic alloy, steel, TiB2, VC, thermophysical properties, laser treatment

Abstract

The paper deals with the actual problem of developing highly efficient wear-resistant materials for manufacturing service linings of brake devices. It is proposed to use composite materials, produced based on the principle of a positive gradient of mechanical properties. Such composite materials are manufactured, and tribological testing of them is carried out. As the matrix, it is proposed to use a composite eutectic alloy, based on steel 12X18H9T taking into account thermophysical properties of reinforcing phases. A thermodynamic analysis of the interaction of all the alloy components at high temperatures is performed. Complex laser treatment of surface to improve the structure and tribological properties of the surface layer is justified. As a result of the studies, the optimal ratio of the matrix material and fillers - TiB2, VC, and the influence of the filler ratio on the wear resistance of the composite material are determined. Parameters of complex laser treatment of friction surface are developed and proved. It is found that dual laser treatment with reflow of surface layer forms a layer with a positive gradient of mechanical properties and high wear resistance. Such treatment allows to reduce the disadvantages of plasma coatings and preserve the benefits of non-equilibrium state of the material. Using the developed materials will allow to improve the reliability and durability of braking systems, in which metallic friction materials are used.

Author Biographies

Мирослав Васильович Кіндрачук, National Aviation University, Prosp. Kosmonavta Komarova, 1, Kiev, Ukraine, 03680

Doctor of Technical Sciences, Professor, Head of Department

Department of Mechanical

Олександ Вікторович Тісов, National Aviation University, Prosp. Kosmonavta Komarova, 1, Kiev, Ukraine, 03680

Ph.D., Associate Professor

Department of Mechanical Engineering

Наталя Миронівна Стебелецька, National Aviation University, Prosp. Kosmonavta Komarova, 1, Kiev, Ukraine, 03680

Postgraduate

Department of Mechanical Engineering

References

  1. Чичинадзе, А. В. Материалы в триботехнике нестационарных процессов [Текст]/ А. В. Чичинадзе, Р. М. Матвеевский, Э. Д. Браун. – М.: Наука, 1986. – 248 с.
  2. Чичинадзе, А. В. Расчёт, испытание и подбор фрикционных пар [Текст]/ А. В. Чичинадзе, Э. Д. Браун, А. Г. Гинзбург, З. В. Игнатьев. – М.: Наука, 1989. – 267 с.
  3. Chichinadze, A. V. Evaluation method of the carton friction composite materials used in multiple disk aviation brakes [Text]/ A. V. Chichinadze// Tribologia. – 2000. – №1, Part 1. – P. 7-22.
  4. Cho, M. H. Effects of ingredients on tribological characteristics of a brake lining: an experimental case study [Text]/ M. H. Cho, S. J. Kim, D. Kim, H. Jang// Wear. – 2005. – Vol. 258, № 11-12. – P. 1682–1687. doi:10.1016/j.wear.2004.11.021
  5. Томский, К. О. Повышение эффективности работы и износостойкости тормозных устройств путем применения биметаллических материалов [Текст]: автореф. дис. ... канд. техн. наук: 05.02.04/ К. О. Томский; ФГБОУ ВПО «Российский государственный университет нефти и газа им. И. М. Губкина». – М., 2013. – 24 с.
  6. Елагина, О. Ю. Использование биметаллических поверхностей для снижения температуры на поверхности трения [Текст]/ О. Ю. Елагина, А. В. Коновалов, К. О. Томский// Трение и смазка в машинах и механизмах. –2009. – №12. – С. 30-34.
  7. Talib, R. J. The Performance Of Semi–Metallic Friction Materials For Passenger Cars [Text]/ R. J. Talib, A. Muchtar, C. H. Azhari// Jurnal Teknologi. – 2007. – Vol. 46, № 1. – P. 53-72. doi:10.11113/jt.v46.282.
  8. Talib, R. J. Microstructural characteristics on the surface and subsurface of semimetallic automotive friction materials during braking process [Text]/ R. J. Talib, A. Muchtar, C. H. Azhari// Journal of Materials Processing Technology. – 2003. – Vol. 140, № 1-3. – P. 694–699. doi:10.1016/s0924-0136(03)00769-6.
  9. Киндрачук, М. В. Износостойкость нержавеющих эвтектических сплавов с фазами внедрения [Текст]/ М. В. Киндрачук, А. К. Шурин, В. Е. Панарин// Проблемы трения и изнашивания. – 1981. –№ 19. – С. 17-28.
  10. А.с. № 1050179 СССР. Порошковый материал для износостойких покрытий [Текст]/ Киндрачук М. В., Корнеев В. Г., Мелентев О. П., Панарин В. Е. (СССР). – № 3411077/27; заявл. 05.03.1982; опубл. в БИ 1983.
  11. Пат. 84998 України МПК С21D1/78 (2006.01) Спосіб отримання градієнтних зносостійких плазмових покриттів з високою припрацьовуваністю [Текст]/ Кіндрачук М. В., Стебелецька Н. М., Кіндрачук В. М., Лобурак В. Я., Головко Л. Ф., Діденко О. Л., Корбут Є. В., Духота О. І., Хлевна Ю. Л. – № u 201304817; заявл. 16.04.2013; опубл. 11.11.2013, Бюл. № 21. – 4 с. – Режим доступу: www/URL: http://uapatents.com/4-84998-sposib-otrimannya-gradiehntnikh-znosostijjkikh-plazmovikh-pokrittiv-z-visokoyu-pripracovuvanistyu.html.
  12. Tubielewicz, K. Influence of wear during friction of chosen properties of a steel surface after burnishing process [Text]/ Krzysztof Tubielewicz, Andrzej Zaborski, Wladyslaw Skoneczny// Tribologia. – 2003. – Т. 22, №2. – Р. 13-19.
  13. Gershman, J. S. Thin films and self-organization during friction under the current collection conditions [Text]/ J. S. Gershman, N. A. Bushe// Surface and Coat. Technol. – 2004. – Vol. 186, № 3. – P. 405-411. doi:10.1016/j.surfcoat.2003.11.016.
  14. Бородай, А. В. О фрикционном взаимодействии, самоорганизации систем и их основных механизмах [Текст]/ А. В. Бородай// Изв. вузов. Сев.-Кавк. регион. техн. н. спец. вып. Пробл. трибоэлектрохим. – 2005. – С. 84-89.
  15. Chichinadze, A. V., Matveevsky, R. M., Brown, E. D. (1986). Materials in non-stationary tribotechnics processes. Moscow: Nauka, 248.
  16. Chychynadze, A. V. (1989). Calculation, testing and selection of frictional pairs. Moscow: Nauka, 267.
  17. Chichinadze, A. V. (2000). Evaluation method of the carton friction composite materials used in multiple disk aviation brakes. Tribologia, №1, Part 1, 7-22.
  18. Cho, M. H., Kim, S. J., Kim, D., Jang, H. (2005, June). Effects of ingredients on tribological characteristics of a brake lining: an experimental case study. Wear, Vol. 258, 1682–1687. doi:10.1016/j.wear.2004.11.021.
  19. Tomskyy, K. O.; Gubkin Russian State University of Oil and Gas. (2013). Increasing of work efficiency and wear resistance of breaking devices by application of bimetallic materials. M., 24.
  20. Elahyna, O. Yu., Konovalov, A. V., Tomskyy, K. O. (2009). The use of bimetallic surfaces to decrease the temperature of friction surface. Friction and lubrication in machines and mechanisms, №12, 30-34.
  21. Talib, R. J., Muchtar, A., Azhari, C. H. (2007, June 1). The Performance Of Semi–Metallic Friction Materials For Passenger Cars. Jurnal Teknologi, Vol. 46, № 1, 53-72. doi:10.11113/jt.v46.282.
  22. Talib, R. J., Muchtar, A., Azhari, C. H. (2003, September). Microstructural characteristics on the surface and subsurface of semimetallic automotive friction materials during braking process. Journal of Materials Processing Technology, Vol. 140, 694-699. doi:10.1016/s0924-0136(03)00769-6.
  23. Kyndrachuk, M. V., Shuryn, A. K., Panaryn, V. E. (1981). Wear resistance of stainless eutectic alloys with interstitial phases. Problems of friction and wear, № 19, 17-28.
  24. Kyndrachuk, M. V., Korneev, V. H., Melentev, O. P., Panaryn, V. E. (1983). S. u. № 1050179 USSR. Powder material for wear resistant coatings. № 3411077/27; stated 05.03.1982.
  25. Kindrachuk, M. V., Stebeletska, N. M., Kindrachuk, V. M., Loburak, V. Ya., Holovko, L. F., Didenko, O. L., Korbut, Ye. V., Dukhota, O. I., Khlevna, Yu. L. (11.11.2013). Pat. 84998 Ukraine IPC С21D1/78 (2006.01). The method of production of gradient wear resistant plasma coatings with high running in properties. № u 201304817; Stated 16.04.2013; bul. № 21, 4. Available: http://uapatents.com/4-84998-sposib-otrimannya-gradiehntnikh-znosostijjkikh-plazmovikh-pokrittiv-z-visokoyu-pripracovuvanistyu.html.
  26. Tubielewicz, K., Zaborski, A., Skoneczny, W. (2003). Influence of wear during friction of chosen properties of a steel surface after burnishing process. Tribologia, Vol. 22, №2, 13-19.
  27. Gershman, J. S., Bushe, N. A. (2004, September). Thin films and self-organization during friction under the current collection conditions. Surface and Coatings Technology, Vol. 186, № 3, 405-411. doi:10.1016/j.surfcoat.2003.11.016.
  28. Boroday, A. V. (2005). About frictional interaction, self organization of systems and their major mechanisms. News of higher educational institutions of Caucasus region. Nechnical sciences. Special edition. Problems of nriboelectrochemistry, 84-89.

Downloads

Published

2014-05-29

How to Cite

Кіндрачук, М. В., Тісов, О. В., & Стебелецька, Н. М. (2014). The development of gradient coatings for linings of braking devices. Technology Audit and Production Reserves, 3(2(17), 7–16. https://doi.org/10.15587/2312-8372.2014.26208

Issue

Vol. 3 No. 2(17) (2014): Mechanical engineering

Section

Mechanical engineering

License

Copyright (c) 2016 Мирослав Васильович Кіндрачук, Олександ Вікторович Тісов, Наталя Миронівна Стебелецька

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.