Evaluating the effectiveness of using printing equipment

Authors

DOI:

https://doi.org/10.15587/2312-8372.2014.26228

Keywords:

effectiveness, printing, production, performance, equipment, machine, quality, speed, circulation, evaluation

Abstract

The effectiveness of using printing equipment was studied and the calculations for the qualitative evaluation of the equipment effectiveness in the printing industries were made. The speed and quality of printing depends on the applied printing equipment, for correct using the full capacity of a printing machine, the parameters that affect the performance of the printing equipment were studied (circulation, number of color inks, order format, complexity of orders, number and qualifications of printers). Next, the main parameters (print time, production capacity) were determined that will speed up the printing process, make it more accurate and insure the production from the perpetual violations of order deadline, violations of printing equipment loading schedule. As a result, the printing process will be more organized.

Author Biographies

Галина Ивановна Турчинова, Kharkiv National University of Radio Electronics, ave. Lenina 14, Kharkiv

Senior Lecturer

Department of Media Systems and Technology

Елена Валерьевна Муравьёва, Kharkiv National University of Radio Electronics, ave. Lenina 14, Kharkiv

Department of Media Systems and Technology

References

  1. Polyansky, N. (1991). Fundamentals of printing production. Moscow: Book, 352.
  2. Mogin, R. (2005). Design printing production. Moscow: MGUP, 194.
  3. Kipphan, G. (2003). Book of printing. Moscow: MGUP, 1280.
  4. Tsigelman, T. (1986). Operational production planning on printing companies. Moscow: Book, 103.
  5. Granskaya, L., Kuptcova, O. (1981). Handbook technologist - polygraphist. Moscow: Book, 256.
  6. Levin, S. (1985). Production processes in the printing industry. Design and calculation. Moscow: Book, 320.
  7. Isakova, M. (1997). Cross-industry standard time and production processes of printing production. Moscow: GPNITS "Economy", 448.
  8. Predko, L., Myklushka, I. (1996). Guidelines for the implementation of a course project on the subject "Design and calculation of joint technological processes using a PC". Lviv: UAD, 48.
  9. Mironov, G., Ershov, A. (2002). Organization of the printing industry. Moscow: Moscow State Unitary Enterprise, 352.
  10. Volkova, O. (2001). Economics of Enterprise. Moscow: Infra-M, 192.

Downloads

Published

2014-07-24

How to Cite

Турчинова, Г. И., & Муравьёва, Е. В. (2014). Evaluating the effectiveness of using printing equipment. Technology Audit and Production Reserves, 4(2(18), 15–17. https://doi.org/10.15587/2312-8372.2014.26228

Issue

Vol. 4 No. 2(18) (2014): Production reserves. Economics and management of enterprise. Development of productive forces and regional economy

Section

Economics and Enterprise Management: Original Research

License

Copyright (c) 2016 Галина Ивановна Турчинова, Елена Валерьевна Муравьёва

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.