Development of mathematical model of thermoanemometric flowmeter for measuring the flow of biofuel
DOI:
https://doi.org/10.15587/2312-8372.2014.26972Keywords:
thermoanimometer, flowmeter, flow, modeling, biofuel, heat transfer, thermal conductivityAbstract
The paper deals with today’s existing instruments for measuring the flow of fluid and fuel, their classification is given. The structure and operating principle of a thermoanemometric flowmeter for measuring the biofuel flow was analyzed. A mathematical model of a temperature field in the biofuel flow was developed. It allows accurately determine the flow. The corresponding modeling was carried out. It was found that the volume fuel flow depends on the thermocouple temperature measurement errors in the range of relative errors from 0.01 to 1.0%. For improving the performance of the thermoanemometric flowmeter, a special neuroprocessor that will compensate for random and dynamic measurement errors using artificial neural networks should be included to the computer architecture. The error of measuring the fuel flow will be less than 1% when the measurement error of the heater temperature is 1%. The results can be applied in the design of new highly precise thermoanemometric flowmeters for measuring the biofuel flow.References
1. Bezvesilna, O. M. (2007). Vytratometriia ta vytratomiry. Zhytomyr: ZhDTU, 604.
2. Lijun Xu, Jun Han, Ya Wang. (2005, October). Design of electrode array of inductance flowmeter. IEEE Sensors Journal, Vol. 5, № 5, 929–933. doi:10.1109/jsen.2005.854486.
3. Clemo, T., Barrash, W., Reboulet, E. C., Johnson, T. C., Leven, C. (2009, July). The Influence of Wellbore Inflow on Electromagnetic Borehole Flowmeter Measurements. Ground Water, Vol. 47, № 4, 515–525. doi:10.1111/j.1745-6584.2008.00559.x.
4. Li, Z.-F., Du, Z., Zhang, K., Li, D.-S., Su, Z.-D., Yan, W.-W. (2013). Design and analysis of flow rectifier of gas turbine flowmeter. Thermal Science, Vol. 17, №5, 1504-1507. doi:10.2298/tsci1305504l.
5. Liu, S., Ding, F., Ding, C., Man, Z. (2014, August). A High-Pressure Bi-Directional Cycloid Rotor Flowmeter. Sensors, Vol. 14, №7, 15480-15495. doi:10.3390/s140815480.
6. Thermal Flowmeter Technology. (2014). BCC Research. Available: http://www.flowmeters.com/thermal-technology. Last accessed 28.08.2014.
7. In: Boyes, W. (2010). Instrumentation Reference book. Ed.4. UK: Linacre House, 530.
8. Frenzel, F., Grothey, H., Habersetzer, C., Hiatt, M. et al. (2011). Industrial Flow Measurement Basics and Practice. Germane: ABB Automation Products GmbH, 290.
9. Bezvesilna, O. M., Tymchyk, H. S. (2007). Tekhnolopchni vymiriuvannia ta prylady. Peretvoriuiuchi prystroi pryladiv. Zhytomyr: ZhDTU, 604.
10. Bezvesilna, O. M., Ilchenko, A. V., Podchashynskyi, Yu. O., Shavurskyi, Yu. O.; Zhytomyr State Technological University. (10.06.2010). Kalorymetrychnyi vytratomir motornoho palyva z tsyfrovoiu obrobkoiu vymiriuvalnoi informatsii. Patent Ukraine № 90985: MPK (2009) F02M 5/00. №a200910565; appl. 19.10.2009, Biul. № 11, 4 p. Available: http://uapatents.com/4-90985-kalorimetrichnijj-vitratomir-motornogo-paliva-z-cifrovoyu-obrobkoyu-vimiryuvalno-informaci.html.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2016 Елена Николаевна Безвесильная, Андрей Владимирович Ильченко, Андрей Геннадьевич Ткачук
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.