Technology and equipment modernization of rolling process on wide-strip mill of the first generation

Authors

DOI:

https://doi.org/10.15587/2312-8372.2014.28097

Keywords:

hot rolling of strips, hydraulic pressure device, assortment, technological process

Abstract

The existing technologies of hot strip production in the mills of different generations are considered in the article on the basis of literary analysis, the major disadvantages are identified and development trends of wide-strip hot mills are determined. The outmoded and physically worn-out equipment is used in continuous wide-strip mills 1700 of Illich Iron and Steel Works in of Mariupol. To prolong the life of the equipment and the maintenance of competitiveness requires the equipment reconstruction and improving the technology of hot rolling of wide strips.

The practical recommendations to improve the technology and mechanical equipment for the production of hot-rolled wide strips in condition of WSHM 1700 of Illich Iron and Steel Works in of Mariupol are proposed in the article. The proposed solutions will address the following actual tasks: the expansion of the product assortment, improving its quality with resource-saving and material-saving and, consequently, effectiveness increase of specific industrial enterprises. 

Author Biography

Анна Александровна Шепель, SHEE "Kryvyi Rig National University", KMI

Postgraduate Department of Metal Forming and Materials

References

  1. 1. Ostapenko, A. L., Konovalov, Yu. V., Rudnev, A. E., Kisil', V. V. (1983). Snizhenie ienergozatrat pri prokatke polos. K.: Tehnіka, 223.

    2. Grudev, A. P., Mashkin, L. F., Hanin, M. I. (1994). Tehnologiia prokatnogo proizvodstva. M.: Metallurgiia, 656.

    3. Saf'ian, M. M., Mazur, V. L., Saf'ian, A. M., Molchanov, A. I. (1988). Tehnologiia protsessov prokatki i volocheniia. Listoprokatnoe proizvodstvo. K.: Vischa shkola, 352.

    4. Poluhin, P. I., Fedosov, N. M., Koroliov, A. A., Matveev, Yu. M. (1982). Prokatnoe proizvodstvo. M.: Metallurgiia, 696.

    5. Rudskoy, A. I., Lunev, V. A. (2008). Teoriia i tehnologiia prokatnogo proizvodstva. SPb.: Nauka, 525.

    6. Diomidov, B. B., Litovchenko, N. V. (1979). Tehnologiia prokatnogo proizvodstva. M.: Metallurgiia, 488.

    7. Belianchikov, L. N., Borodin, D. I., Valavin, V. S. et al; In: Karabasov, Yu. S. (2001). Stal' na rubezhe stoletiy. M.: MISis, 664.

    8. Konovalov, Yu. V. (2008). Spravochnik prokatchika. Kniga 1. Proizvodstvo goriachekatanyh listov i polos. M.: Teplotehnik, 640.

    9. Proizvodstvo goriachekatanoy listovoy stali na nepreryvnom shirokopolosnom stane 1700. Tehnologicheskaia instruktsiia TI 227-P.GL-21-2005 OAO «Mariupol'skiy metallurgicheskiy kombinat imeni Il'icha», 111.

    10. Konovalov, Yu. V. (2008). Nastoiaschee i buduschee agregatov dlia proizvodstva goriachekatanyh listov i polos. Soobschenie 3. Shirokopolosnye stany goriachey prokatki. Proizvodstvo prokata, № 7, 10-21.

    11. Nikolaev, V. A., Vasil'ev, A. A. (2012). Varianty rekonstruktsii stanov dlia goriachey prokatki polos. Proizvodstvo prokata, № 6, 2–9.

    12. Nikolaev, V. A., Vasil'ev, A. G., Vasil'ev, A. A. (2011). Puti sovershenstvovaniia tehnologii proizvodstva polos na ShSGP. Metallurgicheskaia i gornorudnaia promyshlennost', № 4, 48-52.

    13. Konovalov, Yu. V., Korenko, M. G. (2014). Tendentsii izmeneniia sortamenta listovoy prokatnoy produktsii na prokatnyh stanah razlichnogo tipa. Chernaia metallurgiia: Biul. in-ta “Chermetinformatsiia”, № 3, 66−72.

    14. Klimenko, I. V., Parhomenko, A. S. (2010). Vliianie asimmetrichnogo protsessa prokatki na mehanicheskie svoystva gotovyh listov. Materіali 12-oi regіonal'noi naukovo-metodichnoi konferentsіi "Mashinoznavstvo". Donetsk: DonNTU, 30-32.

Downloads

Published

2014-10-02

How to Cite

Шепель, А. А. (2014). Technology and equipment modernization of rolling process on wide-strip mill of the first generation. Technology Audit and Production Reserves, 5(1(19), 46–51. https://doi.org/10.15587/2312-8372.2014.28097

Issue

Vol. 5 No. 1(19) (2014): Technology audit

Section

Technology audit

License

Copyright (c) 2016 Анна Александровна Шепель

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.