Determination of the type of arched carbon fiber reinforced fastening of the preparatory opening for the conditions of the «Dniprovska» mine in weakly metamorphized rocks

Authors

DOI:

https://doi.org/10.15587/2706-5448.2024.306879

Keywords:

mine opening, opening stability, layered massif, carbon fiber, carbon fiber-reinforced plastic, rational parameters

Abstract

The object of study is an arched carbon fiber-reinforced support of constant cross-section in a layered massif of weakly metamorphosed rocks. The article presents an analysis of the possible use of arched fiber-reinforced support of constant cross-section in a layered massif of weakly metamorphosed rocks for the conditions of the «Dniprovska» mine (Ukraine) around the preparatory opening. An analysis of the stability of mine openings in Western Donbas mines has shown that it is necessary to modernize the support system by introducing carbon fiber. The main reason for the low stability of the opening is the insufficient load-bearing capacity of the support, while its technical characteristics do not take into account the complex mining and geological conditions. The increase in stresses at mining depth is associated with impact safety, which is a serious problem during mining. Metal arch supports are deformable and have high rock loads and require a high level of energy absorption, i. e., to be very strong and flexible to withstand significant loads and avoid large displacements of the opening walls.

Carbon fiber-reinforced plastic is able to ensure the stability of the fastening system and eliminate the existing disadvantages of typical metal arch fasteners, namely, high labour intensity, low production speed and high weight of the structure. In this article, the stress-strain state for the specified conditions and the carbon fiber-reinforced plastic arch support of constant cross-section was analyzed using the SolidWorks software product, taking into account the physical and mechanical properties of carbon fiber-reinforced plastic and layered rocks. Taking into account the results of laboratory tests of an equivalent layered array on a press made of PLA and carbon fiber, the dependence of deformations of the equivalent array with increasing load was established.

The use of arched carbon fiber supports of various cross-sections can ensure the opening stability by reducing the intensity of stresses around its contour. On the basis of this study, a rational arched composite support of constant cross-section was proposed for the conditions of the «Dniprovska» mine. The obtained results indicate the need for further research, which will be considered in the author's future works.

Author Biography

Yevhenii Tsivka, Dnipro University of Technology

Postgraduate Student
Department of Mining Engineering and Education

 

References

  1. Bondarenko, V., Salieiev, I., Sheka, I., Tsivka, Ye. (2020). Obhruntuvannia vykorystannia kompozytnykh materialiv dlia pidvyshchennia stiikosti hirnychykh vyrobok. Ukrainian School of Mining Engineering 2020, 25–26. doi: https://doi.org/10.33271/usme14.025
  2. Bazaluk, O., Rysbekov, K., Nurpeisova, M., Lozynskyi, V., Kyrgizbayeva, G., Turumbetov, T. (2022). Integrated Monitoring for the Rock Mass State During Large-Scale Subsoil Development. Frontiers in Environmental Science, 10. doi: https://doi.org/10.3389/fenvs.2022.852591
  3. Bondarenko, V., Kovalevska, I., Cawood, F., Husiev, O., Snihur, V., Jimu, D. (2021). Development and testing of an algorithm for calculating the load on support of mine workings. Mining of Mineral Deposits, 15 (1), 1–10. doi: https://doi.org/10.33271/mining15.01.001
  4. Guodong, L., Shugang, L., Feng, L. (2018). Yong Research on mining-induced deformation and stress, insights from physical modeling and theoretical analysis. Arabian Journal of Geosciences, 11, 100.
  5. Skipochka, S., Krukovskyi, O., Serhiienko, V., Krasovskyi, I. (2019). Non-destructive testing of rock bolt fastening as an element of monitoring the state of mine workings. Mining of Mineral Deposits, 13 (1), 16–23. doi: https://doi.org/10.33271/mining13.01.016
  6. Asadi, A., Miller, M., Moon, R. J., Kalaitzidou, K. (2016). Improving the interfacial and mechanical properties of short glass fiber/epoxy composites by coating the glass fibers with cellulose nanocrystals. Express Polymer Letters, 10 (7), 587–597. doi: https://doi.org/10.3144/expresspolymlett.2016.54
  7. Brook, M., Hebblewhite, B., Mitra, R. (2020). Coal mine roof rating (CMRR), rock mass rating (RMR) and strata control: Carborough Downs Mine, Bowen Basin, Australia. International Journal of Mining Science and Technology, 30 (2), 225–234. doi: https://doi.org/10.1016/j.ijmst.2020.01.003
  8. Shashenko, O. M., Hapieiev, S. M., Shapoval, V. G., Khalymendyk, O. V. (2019). Analysis of calculation models while solving geomechanical problems in elastic approach. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 1, 28–36. doi: https://doi.org/10.29202/nvngu/2019-1/21
  9. Ji, S., Wang, Z., Karlovšek, J. (2022). Analytical study of subcritical crack growth under mode I loading to estimate the roof durability in underground excavation. International Journal of Mining Science and Technology, 32 (2), 375–385. doi: https://doi.org/10.1016/j.ijmst.2021.08.006
  10. Bondarenko, V. I., Kovalevska, I. A., Podkopaiev, S. V., Sheka, I. V., Tsivka, Y. S. (2022). Substantiating arched support made of composite materials (carbon fiber-reinforced plastic) for mine workings in coal mines. IOP Conference Series: Earth and Environmental Science, 1049 (1), 012026. doi: https://doi.org/10.1088/1755-1315/1049/1/012026
Determination of the type of arched carbon fiber reinforced fastening of the preparatory opening for the conditions of the «Dniprovska» mine in weakly metamorphized rocks

Downloads

Published

2024-06-27

How to Cite

Tsivka, Y. (2024). Determination of the type of arched carbon fiber reinforced fastening of the preparatory opening for the conditions of the «Dniprovska» mine in weakly metamorphized rocks. Technology Audit and Production Reserves, 3(1(77), 35–40. https://doi.org/10.15587/2706-5448.2024.306879

Issue

Vol. 3 No. 1(77) (2024): Industrial and technology systems

Section

Technology and System of Power Supply

License

Copyright (c) 2024 Yevhenii Tsivka

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.