Improvement of the feed system of the coal combine by means of load forecasting
DOI:
https://doi.org/10.15587/2312-8372.2014.32909Keywords:
booty combine, outrigger feed system, overload, transient processes, speed, setpointAbstract
This article presents the consideration of the methods of increasing effectiveness of protection against overloads of electric drives and executive bodies of the booty combine with outrigger feed system. The main purpose of the study is validation the ways to improve efficiency protection against sudden overloads and improving the dynamic properties of the outrigger feed system. It is developed a computer simulation of transient processes in outrigger feed system and it is shown the process of formation of dynamic overloads on the executive bodies of the booty combine. It is justified ways of improving transient towards decrease dynamic overloads. For this purpose it is proposed the use of preliminary smooth decrease feed rate before the abrupt change of the mechanical properties of the mine for a period of 2 to 5 seconds. Further research may focus on the justification of the methods of analysis of the mechanical properties of the mine and the parameters of the system software load control combine with outrigger feed system.References
- Gorbatov, P. A., Petrushkin, G. V., Lisenko, M. M. (2006). Gornyie mashinyi dlya podzemnoy dobyichi uglya. Donetsk: Nord Kompyuter, 669.
- Klorikyan, S. H., Starichnev, V. V., Srebnyiy, M. A. (2000). Mashinyi i oborudovanie dlya shaht i rudnikov. Moskva: Izdatelstvo Moskovskogo gosudarstvennogo gornogo universiteta, 471.
- Serov, L. A. (1995). Ustroystva upravleniya i sistemyi regulirovaniya ugledobyivayuschih mashin. Moskva: Nedra, 167.
- Schetinin, T. A. (1985). Elektromagnitnyie muftyi skolzheniya. Moskva: Energoatomizdat, 272.
- Antipov, V. A. (1989). Elektroslesaryu dobyichnogo i prohodcheskogo oborudovaniya. Donetsk: Donbass, 159.
- Dubinin, S. V., Potsepaev, V. V. (2012). Sistema avtomaticheskoy stabilizatsii skorosti vyinesennogo privoda podachi s elektromagnitnyim tormozom skolzheniya dlya gornyih mashin. Naukovi pratsi Donetskogo natsionalnogo tehnichnogo universitetu. Seriya: Obchislyuvalna tehnika ta avtomatizatsiya, № 22 (200), 6-10.
- Dubinin, S. V. (1991). Snizhenie dinamicheskih nagruzok i povyishenie effektivnosti vyinesennoy sistemyi podachi ochistnogo kombayna. Donetsk, 209.
- Boyko, N. G. (2012). Optimizatsiya parametrov silovyih sistem ochistnyih kombaynov. Donetsk: GVUZ DonNTU, 214.
- Serov, L. A. (1995). Ustroystva upravleniya i sistemyi regulirovaniya ugledobyivayuschih mashin. Moskva: Nedra, 167.
- Sanchenko, A. P., Dubinin, S. V. (2007). Issledovanie avtomatizirovannoy dvuhprivodnoy vyinesennoy sistemyi podachi ochistnogo kombayna i opredelenie ee optimalnyih parametrov. Sbornik nauchnyh statei VII Mezhdunarodnoi nauchno-tehnicheskoi konferentsii aspirantov i studentov, Donetsk, 26-28 aprelia 2007. Available: http://www.uran.donetsk.ua/~masters/2007/fema/sanchenko/library/lib02.htm
- Boyko, N. G. (2009). Dinamika privoda ispolnitelnogo organa ochistnyih kombaynov i ego harakteristiki pri sluchaynom vozmuschenii. Naukovi pratsi Donetskogo natsionalnogo tehnichnogo universitetu. Seriya: Girnycho-elektromehanychna, № 17 (157), 3-79.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2016 Сергей Геннадьевич Зубарев
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.