Regularities of the coatings formation from bronze and babbit powders by hot pressing method
DOI:
https://doi.org/10.15587/2312-8372.2015.51426Keywords:
hot pressing, bronze powders, babbit shavings, coatingAbstract
The paper is devoted to the development of new coating made of bronze and babbit powders by hot pressing method. The purpose of the work is to explore the possibility and establish the regularities of coating formation on the surface with use of powders which have been obtained by grinding waste products. The new device for hot-pressing processes which allows you to control shrinkage has been developed for experimental studies. The studies of the coating were carried out by the methods of optical metallography, X-ray analysis, mechanical testing. It is shown that the formation of the structure combines the processes of the liquid phase sintering of the powder mixture and the diffusion interaction with tinned of steel surface 20. The structure of coating consists of the bronze solid phase and babbit soft phase that provides wear resistance. The established regularities allow you to control the processes of coating formation, creating permanent connections with the steel surface and using waste products. The developed technology can be used for manufacturing new and for their repair worn details of ship locking reinforcement of cargo systems (flanges, cranes, valves).
References
- Geets, V. M. (2012). Spetsial'nye sistemy nalivnyh sudov. Vladivostok: Mor. gos. un-t, 185.
- Sannen, H. (2007). Shipment of radioactive materials: historical overview of IAEA regulations – a personal perception. Packaging, Transport, Storage & Security of Radioactive Material, 18 (1), 19–20. doi:10.1179/174651007x191143
- Dubovyi, O. M., Kazymyrenko, Yu. O., Lebedieva, N. Yu., Samokhin, S. M. (2009). Inzhenerne materialoznavstvo. Mykolaiv: Vydavnytstvo NUK, 444.
- Los', I. S., Kriukov, D. B., Horin, A. V. (2010). Medno-nikelevye kompozitsionnye materialy, poluchennye svarkoi vzryvom. Izvestiia VolgGTU, 5 (4), 88−92.
- Il'chenko, N. I., Didenko, S. Yu., Nekliudov, I. M., Bondarenko, S. L. (2003). Poluchenie metodom goriachei prokatki v vakuume sloistyh i kompozitsionnyh materialov tipa med'-stal' i issledovanie ih svoistv. Voprosy atomnoi nauki i tehniki, 3, 158–160.
- Astahov, E., Artemchuk, V. (2012). Features of gas-thermal application of coatings reducing. Eastern-European Journal Of Enterprise Technologies, 3(5(57)), 4–10. Available: http://journals.uran.ua/eejet/article/view/4021
- Chigarev, V. V., Tsys, E. A. (2012). Sposoby elektrokontaktnogo uprochneniia detalei. Vіsnik Priazovs'kogo derzhavnogo unіversitetu, 24, 174–177.
- Saifullin, R. N., Nafikov, M. Z. (2009). O vozmozhnosti vosstanovleniia iznoshennyh valov elektrokontaktnoi privarkoi stal'nyh provolok s poroshkovym pokrytiem. Uprochniaiushchie tehnologii i pokrytiia, 5, 3−6.
- Zhornik, V. A., Prokopenko, Yu. A. (2010). Modelirovanie protsessov spekaniia poroshkovyh pokrytii pri teplovom i mehanicheskom vozdeistviiah. Vestnik TGTU, 16 (1), 59−66.
- Riabicheva, L. A., Nikitin, Yu. N., Beloshitskii, N. V., Baranov, A. G. (2007). Othody promyshlennosti – istochnik ishodnyh materialov dlia poroshkovoi metallurgii. MTM 07 Conference Wastes of industry proceedings. Bularia, Sofia, 434–438.
- Kazimirenko, Yu. A. (2005). Issledovanie protsessa polucheniia psevdosplava iz poroshkov bronzy i babbita. Zbirnyk naukovykh prats NUK, 5 (404), 29−33.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2016 Юлія Олексіївна Казимиренко, Наталія Юріївна Лебедєва
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.