Improving of wear resistance of screw parts by plasma surfacing by powdered materials
DOI:
https://doi.org/10.15587/2312-8372.2015.51490Keywords:
plasma surfacing, powder mixture, stainless steel, DC reverse polarityAbstract
The use of reverse polarity plasma surfacing of the screw parts for the equipment of the processing enterprises of agricultural production and the results of our research in this area are discussed in this article. The main purpose of the research is the substantiation of the method of plasma surfacing of cylindrical equipment parts of the processing enterprises of agricultural production. The modern instruments and methods are used during research. The results of staged experiments provided the basis for the selection of the factors for matrix planning of laboratory tests in determining the geometric parameters of the deposited layer on the surfacing modes. The method of plasma surfacing by the powdered mixture, which provides the required mechanical properties of the deposited layer and offers for reclamation of the details of the processing equipment of agricultural enterprises, is proved. The tests at the company confirmed the results of laboratory tests to ensure the durability and quality of the deposited layers of detail.
References
- Popov, S. M., Mitiaev, A. A. (1992). Ispol'zovanie naplavlennoi kristallizatsii upravliaiushchei fazy dlia povysheniia sroka sluzhby naplavleniia detalei. Novye konstruktsionnye stali splavy i metody ih obrabotki dlia povysheniia nadezhnosti. Zaporozhye: ZMI, 225.
- Gladkii, P. V., Perepletchikov, E. F., Riabtsev, N. A. (2007). Plazmennaia naplavka. Svarochnoe proizvodstvo, 2, 32–40.
- Perepletchikov, E. F. (2004). Sposoby plazmennoi naplavki, primeniaemye v stranah SNG. Svarshchik, 3, 9–14.
- Balanovs'kii, A. E. (2006). Plazmennoe poverhnostnoe uprochnenie metallov. Irkutsk: ISTU, 180.
- Maksimovich, G. G., Shashins'kii, V. O., Kopylov, V. N. (1983). Fiziko-himicheskie protsessy pri plazmennom napylenii i razrushenii materialov s pokrytiiami. Kyiv: Naukova dumka, 263.
- Severniov, M. M. (1979). Tehnologiia vosstanovleniia detalei sel'skohoziaistvennyh mashin, imeiushchih formu tel vrashcheniia, plazmennoi naplavkoi. Rekomendatsii TsNNTMESH. Minsk, 26.
- Elektronnyi katalog OOO «Plazma-master». Available: http://plazma-master.kiev.ua. Last accessed 10.09.2015.
- Kiselev, G. S., Lihman, V. V., Grachev, Yu. V., Astanin, V. I. (2004). Opyt primeneniia plazmennyh tehnologii v proizvodstve kriogennoi tehniki. Svarochnoe proizvodstvo, 12, 34–35.
- Strahova, E. A., Erofeev, V. A., Sudak, V. A. (2009). Fiziko-matematichiskoe modelirovanie protsessa shirokospainoi naplavki s poperechnymi kolebaniiami pazmotrona. Svarka i diagnostika, 3, 32–38.
- Shchitsyn, Yu. D., Kovalapov, O. A., Shchitsyn, V. Yu. (2009). Vozmozhnosti plazmennoi obrabotki tokom obratnoi poliarnosti. Svarka i diagnostika, 2, 42–45.
- Koroteev, A. S., Mironov, V. M., Svirchuk, A. S. (1993). Plazmotrony konstruktsii, harakteristiki, raschet. Moscow: Mashinostroenie, 295.
- Kuksenova, L. I., Lapteva, V. G., Kolmakov, A. G., Rybakova, L. M. (2011). Metody ispytaniia na trenie i iznos. Moscow: Internet inzhenerii, 152.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2016 Євген Якович Прасолов, Світлана Анатоліївна Бєловол, Станіслав Олександрович Багмет, Богдан Сергійович Федій
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.