Development and research of intelligent system for analysis of random characteristics of stochastic processes of mechanical quantities

Authors

DOI:

https://doi.org/10.15587/2312-8372.2015.52011

Keywords:

intelligent system, measurement, mechanical quantities, stochastic process, database, intellectualization

Abstract

At the present stage of development of measurement systems it is particularly acutely the need of total computerization of the measurements. This understanding was the impetus for the functionality development of measuring devices and the development of intelligent measuring systems (IMS) of new generation. Therefore, one of the most important areas of measuring systems is their intellectualization that enables to determine their purposeful behavior (algorithm operation) depending on changes in their conditions of work and required accuracy of measurements.

Within this article the research and development of IMS required accuracy for analysis of stochastic characteristics of random processes of mechanical quantities and publishing guidelines for their implementation.

As a methodological basis of solving this problem it is used a comprehensive approach to determining IMS errors.

The article shows the understanding that IMS let select the best algorithm for measuring the stochastic characteristics of the measurement results and accompanying assessment of their errors.

This event is realized by using an integrated approach to the definition of statistical errors of measurements of mechanical variables. Theoretical analysis and experimental verification of these results showed that a comprehensive approach to the definition of statistical error of measurement allows, first of all, get a scientifically based assessment of the accuracy and reliability of measurement results.

The article shows that the synthesized algorithms allow for the same length of implementation to reduce measurement error in 2-4 times in comparison with known algorithms. Conversely, at constant measurement accuracy by the same factor can reduce the length of implementation.

Author Biographies

Володимир Павлович Квасніков, National Aviation University, Komarova Ave, 1, Kyiv, Ukraine, 03680

Doctor of Technical Sciences, Professor, Honorary Metrologist of Ukraine

Department of Computerized Electrical Systems and Technologies 

Юлія Павлівна Лещенко, National Aviation University, Komarova Ave, 1, Kyiv, Ukraine, 03680

Postgraduate

Department of Informative-Measuring Systems

References

  1. Zaiko, A. I. (1985). Analogovye izmereniia mnogomernyh harakteristik sluchainyh protsessov. Metrologiia, 11, 3–6.
  2. Zhitnikov, V. P., Zaiko, N. A. (2004). Determination of methodical and instrumental errors of statistical measurements. Proc. of 2nd Int. Summer Scientific School «High Speed Hydrodynamics». Cheboksary, Russia, 281–285.
  3. Cimbala, J. M. Measurement of Mechanical Quantities. Available: https://www.mne.psu.edu/me345/Lectures/Mechanical_measurement.pdf
  4. Hsin-yu Shan. Mechanical Measurements. Available: http://www.cv.nctu.edu.tw/chinese/teacher/Ppt-pdf/AGTwk2%20Mechnical%20Measurement.pdf
  5. Terehov, V. M. (2005). Sistemy upravleniia elektroprivodov. Moscow: Publishing Centre «Academy», 304.
  6. Luger, J. F. (2003). Iskusstvennyi intellekt: strategii i metody resheniia slozhnyh problem. Ed. 4. Translated from English. Moscow: Publishing House «Williams», 864.
  7. Nolfi, S., Floreano, D. (2000). Evolutionary Robotics. Cambridge, MA, USA: MIT Press. Available: http://mitpress.mit.edu/sites/default/files/titles/content/9780262640565_sch_0001.pdf
  8. Mason, M. T. (2001). Mechanics of Robotic Manipulation. Cambridge, MA, USA: MIT Press, 272.
  9. Weiss, G. (2013). Multiagent Systems. Ed. 2. Cambridge, MA, USA: MIT Press, 920.
  10. Choset, H., Lynch, K. M., Hutchinson, S., Kantor, G. A., Burgard, W., Kavraki, L. E., Thrun, S. (2005). Principles of Robot Motion Theory, Algorithms, and Implementations. Cambridge, MA, USA: MIT Press, 632.

Downloads

Published

2015-09-22

How to Cite

Квасніков, В. П., & Лещенко, Ю. П. (2015). Development and research of intelligent system for analysis of random characteristics of stochastic processes of mechanical quantities. Technology Audit and Production Reserves, 5(3(25), 22–26. https://doi.org/10.15587/2312-8372.2015.52011

Issue

Vol. 5 No. 3(25) (2015): Systems and control processes. Information and control systems

Section

Systems and Control Processes: Original Research

License

Copyright (c) 2016 Володимир Павлович Квасніков, Юлія Павлівна Лещенко

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.