Vibrations in the strengthening processing of machinery parts
DOI:
https://doi.org/10.15587/2312-8372.2015.56581Keywords:
vibrations, deformation, wear resistance, durability, vibration hardening performance, working abilityAbstract
In this paper we discuss the problem of the application of vibrations at hardening the surface of items such as the manufacture and restoration of details of agricultural machinery to increase their share. The aim of the study is to improve the wear resistance of parts through the use of technology developed on the basis of vibration hardening of the working surfaces. Analysis of the wear resistance of parts in conventional vibratory and recovery methods to evaluate the operational durability of these parts, and to develop more efficient technology of hardening in their manufacture and restoration. The process of wear of the cutting element disc coulter seeding machines, found the optimal parameters of the vibration treatment, offering enhanced durability of these components. Based on the data developed and implemented in the production process of hardening of cutting elements disc coulters grain drills based on the vibration deformation of the working surfaces. The results can be used in the manufacture of engineering for hardening of manufactured parts.
Developed and implemented in the production process using vibration reduction hardening can improve the durability of working bodies seeding machines.References
- Babichev, A. P., Babichev, I. A. (2008). Osnovy vibratsionnoi tehnologii. Rostov n/D: Izdatel'skii tsentr DGTU, 694.
- Zaika, P. M. (1994). Primenenie vibratsii v tehnologii sel'skohoziaistvennogo proizvodstva i pererabatyvaiushchei promyshlennosti. Materialy mezhdunarodnoi nauchno-tehnicheskoi konferentsii. Vinnitsa, 57–59.
- Tkachiov, V. N. (1984). Iznos i povyshenie dolgovechnosti rabochih organov pochvoobrabatyvaiushchih mashin. Moscow: Mashinostroenie, 372.
- Kudriavtsev, I. V. (1981). Ustalost' krupnyh detalei mashin. Moscow: Mashinostroenie, 240.
- Golubev, T. M. (1987). Novye metody obrabotki metallov davleniem. Kyiv, 208.
- Garkunov, D. N. (1988). Dolgovechnost' trushchihsia detalei mashin. Moscow: Mashinostroenie, 203.
- Dudnikov, A. A., Belovod, A. I., Dudnik, V. V., Kanivets, A. V. (2011). Povyshenie dolgovechnosti detalei mashin plasticheskim deformirovaniem. Naukovі notatki, 32, 128–131.
- Dudnikov, A., Belovod, A., Pasyuta, A., Gorbenko, A., Kelemesh, A. (2015). Dynamics of wear cutting elements of tillers. Annals of Warsaw University of Life Sciences – SGGW: Agriculture (Agricultural and Forest Engineering), 65, 15–19.
- Dudnikov, A. A., Bilovod, O. I., Pasiuta, A. H. (2014). Pidvyshchennia nadiinosti robochykh orhaniv gruntoobrobnykh mashyn. Visnyk Poltavskoi derzhavnoi ahrarnoi akademii, 3, 172–177.
- Kanivets, O. V. (2011). Modeliuvannia robochoi poverkhni dyskovoho robochoho orhanu. Visnyk KhNTUSH im. P. Vasylenka: «Mekhanizatsiia silskoho vyrobnytstva», Vol. 107, № 1, 336–340.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2016 Анатолий Андреевич Дудников, Антон Александрович Келемеш, Александр Васильевич Канивец, Александр Викторович Горбенко, Андрей Григорьевич Пасюта
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.