Development of technological processes of vibration machine long container from composite materials
DOI:
https://doi.org/10.15587/2312-8372.2015.56619Keywords:
container, composite, machine, vibration treatmentAbstract
Relevance of the use of new materials for creation of vibrating machine U-shaped container established. Researches by selection of long container vibration machine design scheme made of composite materials presented in the article. Experimental researches by choice of container composite material are shown. Composite materials based on cold curing epoxy compositions and polyester resin hot curing chosen for researches. The results of composite samples tests analyzed. Based on the test results of fiberglass samples plotted breaking stress and changes in strength for epoxy and polyester fiberglass models, depending on fiber tissue percentage. Optimal materials for the creation of U-shaped long container selected. The technological process of manufacturing the vibration machine container intended for long type details treatment. Detailed description of the preparatory and basic operations of container manufacturing are shown in the article.
References
- Babichev, A. P., Babichev, I. A. (2008). Osnovy vibratsionnoi tehnologii. Rostov-na-Donu: Izdatel'skii tsentr DGTU, 694.
- Kartashov, I. N., Shainskii, M. E., Vlasov, V. A. et al. (1975). Obrabotka detalei svobodnymi abrazivami v vibriruiushchih rezervuarah. Kyiv: Vysshaia shkola, 179.
- Lineinye prohodnye ustanovki. ROSLER finding a better way… Available: http://www.rosler.ru/produkte/gleitschlifftechnik/linear_durchlaufanlagen/. Last accessed: 12.11.2015.
- Udalenie zausentsa. ROSLER finding a better way… Available: http://www.rosler.ru/anwendungsgebiete/gleitschlifftechnik/. Last accessed: 12.11.2015.
- T-Generation. Available: http://www.t-generation.ru/003_chronology.html. Last accessed: 12.11.2015.
- Used Equipment. Vibratoryfinishing. Available: www/URL: http://vibratoryfinishing.com/used.htm. Last accessed: 12.11.2015.
- Trough Vibrators. Walther Trowal. Available: http://www.walther-trowal.com/en/products/mass-finishing/trough-vibrators/. Last accessed: 12.11.2015.
- Bernik, P. S., Yaroshenko, L. V. (1998). Vibratsionnye tehnologicheskie mashiny s prostranstvennymi kolebaniiami rabochih organov. Vinnitsa, 116.
- Babichev, A. P., Trunin, V. B., Samodumskii, Yu. M., Ustinov, V. P. (1984). Vibratsionnye stanki dlia obrabotki detalei. Moscow: Mashinostroenie, 168.
- Volkov, I. V., Yasunik, S. N., Romanchenko, A. V., Lubenksaia, L. M. (2013). Obrabotka v vibratsionnyh stankah. Lugansk: Noulidzh, 288.
- Chung, D. D. L. (2003). Composite materials for vibration damping. Engineering Materials and Processes. London: Springer, 245–252. doi:10.1007/978-1-4471-3732-0_12
- McCutcheon, D. M., Reddy, J. N., O’Brien, M. J., Creasy, T. S., Hawkins, G. F. (2006, July). Damping composite materials by machine augmentation. Journal of Sound and Vibration, Vol. 294, № 4-5, 828–
- Timoshenko, S. P., Voinovskii-Kriger, S. (1966). Plastinki i obolochki. Moscow: Nauka, 635.
- Timoshenko, S. P., Voinovskii-Kriger, S. (1966). Plastinki i obolochki. Moscow: Nauka, 635.
- Ponomarev, S. D. et al. (1958). Raschety na prochnost' v mashinostroenii. Vol. II. Moscow: Mashgiz, 974.
- Karpinos, A. M. (1985). Kompozitsionnye materialy. Kyiv: Naukova dumka, 592.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2016 Алексей Владимирович Романченко
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.