Mathematical model for calculating separators and compressor of separation unit for gas mixture during disposal of waste

Authors

  • Сергей Александрович Вамболь National University of Civil Protection of Ukraine, Chernichevska street, 94, Kharkiv, Ukraine, 61000, Ukraine https://orcid.org/0000-0002-8376-9020
  • Юрий Васильевич Шахов Zhukovsky National Aerospace University "Kharkiv Aviation Institute", Chkalovа str., 17, Kharkiv, Ukraine, 61070, Ukraine https://orcid.org/0000-0003-1228-981X
  • Виола Владиславовна Вамболь Zhukovsky National Aerospace University "Kharkiv Aviation Institute", Chkalovа str., 17, Kharkiv, Ukraine, 61070, Ukraine https://orcid.org/0000-0002-8229-3956
  • Илья Иванович Петухов Zhukovsky National Aerospace University "Kharkiv Aviation Institute", Chkalovа str., 17, Kharkiv, Ukraine, 61070, Ukraine https://orcid.org/0000-0002-0645-7912

DOI:

https://doi.org/10.15587/2312-8372.2016.58619

Keywords:

disposal, waste, environmental safety, mathematical modeling, multicomponent gas mixtures, low-temperature separation

Abstract

The problems of separation of flows of gas mixtures in the process implementation of environmentally safe waste disposal are considered. The main aim of the research is the mathematical description of the processes in the separator and the compressor - the functional elements of a complex energy-technological plant for the separation of multicomponent gas mixtures produced by the waste gasification. To determine the composition of the vapor and liquid products obtained at the outlet of the separator, it is used a set of subprograms for calculating the coefficient of thermal properties of the working bodies, which is based on the Peng-Robinson equation of state. The mathematical models of individual functional elements of a complex energy-technological plant of low-temperature separation of multicomponent gas mixtures obtained by recycling. The mathematical model of plant units, such as a separator and compressor, are presented in this part of the study. The study describes a model of the complex as a whole, and as the executive part of the system of environmental safety management of waste disposal.

Author Biographies

Сергей Александрович Вамболь, National University of Civil Protection of Ukraine, Chernichevska street, 94, Kharkiv, Ukraine, 61000

Doctor of Technical Sciences, Professor, Head of the Department

Department of applied mechanics

Юрий Васильевич Шахов, Zhukovsky National Aerospace University "Kharkiv Aviation Institute", Chkalovа str., 17, Kharkiv, Ukraine, 61070

Senior Researcher

Department of Aerospace Thermal Engineering 

Виола Владиславовна Вамболь, Zhukovsky National Aerospace University "Kharkiv Aviation Institute", Chkalovа str., 17, Kharkiv, Ukraine, 61070

Candidate of Technical Science, Associate Professor

Department of chemistry, environmental science and technologies of expertise

Илья Иванович Петухов, Zhukovsky National Aerospace University "Kharkiv Aviation Institute", Chkalovа str., 17, Kharkiv, Ukraine, 61070

Candidate of Technical Science, Associate Professor

Department of Aerospace Thermal Engineering 

References

  1. Vambol, V. V., Kobrin, V. N., Nechiporuk, N. V. (2014). Ensuring environmental safety during waste management. Meždunarodnyj naučno-issledovatel'skij žurnal, 11-2 (30), 8–10.
  2. Chubenko, A. S., Kobrin, V. N., Vambol, V. V. (2014). Environmentally Friendly Waste Disposal. Otkrytye informatsionnye i komp'iuternye integrirovannye tehnologii, 62, 98–102.
  3. Kobrin, V. N., Nechiporuk, N. V., Vambol, V. V. (2014). Control system of environmental safety during disposal of solid household and industrial waste. Ekolohichna bezpeka, 2 (18), 25–30.
  4. Zhang, Q., Dor, L., Yang, W., Blasiak, W. (2010). Properties and optimizing of a plasma gasification & melting process of municipal solid waste. Proceedings of international conference of thermal treatment technology & hazardous waste combustors (IT3/HWC). San Francisco, California, USA, 296–316.
  5. Lemmens, B., Elslander, H., Vanderreydt, I., Peys, K., Diels, L., Oosterlinck, M., Joos, M. (2007, January). Assessment of plasma gasification of high caloric waste streams. Waste Management, Vol. 27, № 11, 1562–1569. doi:10.1016/j.wasman.2006.07.027
  6. Falcucci, G., Jannelli, E., Minutillo, M., Ubertini, S., Han, J., Yoon, S. P., Nam, S. W. (2012, September). Integrated numerical and experimental study of a MCFC-plasma gasifier energy system. Applied Energy, Vol. 97, 734–742. doi:10.1016/j.apenergy.2012.01.060
  7. Themelis, N. J., Castaldi, M. J. (2010). Technical and economic analysis of Plasma-assisted Waste-to-Energy processes. Columbia University, 79.
  8. Park, H.-S., Lee, B.-J., Kim, S.-J. (2005). Medical Waste Treatment Using Plasma. Industrial & Engineering Chemistry, Vol. 11, № 3, 353–360.
  9. Ha, S. A., Son, H. J., Sung, N. C. (2000). Waste incineration. J. Korea Society of Waste Management, 17, 665.
  10. Park, H.-S., Chung, J. D. (2001). The formation of dioxins from waste incineration. J. Korea Society of Waste Management, 18, 302.
  11. Park, H.-S., Lee, B.-J. (2001). Secondary environmental problem during incineration. J. Korea Society of Waste Management, 218, 722.
  12. Shakhov, Yu. V., Petukhov, I. I., Vambol, V. V. (2015). Mathematical model of energy-technological plants for the separation of multicomponent gas mix-tures. Visnyk NTU «KhPI». Ser. Matematychne modeliuvannia v tekhnitsi ta tekhnolohiiakh, 41 (1150), 134–139.
  13. Staskevich, N. L., Severinets, G. N., Vigdorchik, D. Ya. (1990). Spravochnik po gazosnabzheniiu i ispol'zovaniiu gaza. Leningrad: Nedra, 762.

Published

2016-01-21

How to Cite

Вамболь, С. А., Шахов, Ю. В., Вамболь, В. В., & Петухов, И. И. (2016). Mathematical model for calculating separators and compressor of separation unit for gas mixture during disposal of waste. Technology Audit and Production Reserves, 1(1(27), 50–53. https://doi.org/10.15587/2312-8372.2016.58619