Synchronization of the dynamics of similar boilers working for a common line
DOI:
https://doi.org/10.15587/2312-8372.2016.85635Keywords:
synchronization, similar boilers, control system, stabilization, line, perturbationAbstract
The object of research is the system of the three boilers ПТВМ-50. With a system of three or more boilers it can ensure the normal operation of thermal power facilities, i. e. the uninterrupted supply of hot water and constant heating the coolant to the desired temperature. When receive a perturbation signal, load on the system is changed, but while having three boilers, it can provide the new load parameters and the system will not operate at maximum capacity.
The operation algorithm of similar objects on the common system with maintaining a given load was used in order to ensure synchronous operation.
The result is the reaction of the whole system with a deviation of the average temperature that issued by the boilers in the network in an amount equal to 0,14 ºC. This result was achieved through the use of the chosen control system to synchronization and stabilization of operation of the boilers.
References
- Boisvert, P. G., Runstedtler, A. (2014). Fuel sparing: Control of industrial furnaces using process gas as supplemental fuel. Applied Thermal Engineering, 65 (1-2), 293–298. doi:10.1016/j.applthermaleng.2013.12.047
- Davoudi, M., Rahimpour, M. R., Jokar, S. M., Nikbakht, F., Abbasfard, H. (2013). The major sources of gas flaring and air contamination in the natural gas processing plants: A case study. Journal of Natural Gas Science and Engineering, 13, 7–19. doi:10.1016/j.jngse.2013.03.002
- Berghout, N., van den Broek, M., Faaij, A. (2013). Techno-economic performance and challenges of applying CO2 capture in the industry: A case study of five industrial plants. International Journal of Greenhouse Gas Control, 17, 259–279. doi:10.1016/j.ijggc.2013.04.022
- Liu, H., Li, P., Wang, K. (2013). Optimization of PEM fuel cell flow channel dimensions – Mathematic modeling analysis and experimental verification. International Journal of Hydrogen Energy, 38 (23), 9835–9846. doi:10.1016/j.ijhydene.2013.05.159
- Tucakovic, D., Stupar, G., Zivanovic, T., Petrovic, M., Belosevic, S. (2013). Possibilities for reconstruction of existing steam boilers for the purpose of using exhaust gases from 14 MW or 17 MW gas turbine. Applied Thermal Engineering, 56 (1-2), 83–90. doi:10.1016/j.applthermaleng.2013.03.028
- Rusinowski, H., Stanek, W. (2010). Hybrid model of steam boiler. Energy, 35 (2), 1107–1113. doi:10.1016/j.energy.2009.06.004
- Bujak, J. (2009). Optimal control of energy losses in multi-boiler steam systems. Energy, 34 (9), 1260–1270. doi:10.1016/j.energy.2009.05.005
- Stopakevich, А. (2013). Sistemnyi analiz i teoriia slozhnyh sistem upravleniia. Оdessa: Astroprint, 380.
- Demchenko, V. (2001). Avtomatizatsiia i modelirovanie tehnologicheskih protsessov TES i AES. Odesa: Astroprint, 305.
- Prohorenkov, A., Kachala, N. (2011). Parametricheskii sintez reguliatorov teploenergeticheskih obiektov s ispol'zovaniem informatsionnogo podhoda. Vestnik Murmanskogo gosudarstvennogo tehnicheskogo universiteta, 14 (4), 704–711.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2016 Иван Васильевич Слободян, Вадим Феликсович Ложечников, Алексей Аркадьевич Стопакевич
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
