Research algorithm development of strengthening possibility of emergency firmness of belt conveyor units

Authors

  • Николай Александрович Киктев National University of Life and Environmental Sciences, Heroes of Defense str., 15, Kiev, 03041, Ukraine https://orcid.org/0000-0001-7682-280X

DOI:

https://doi.org/10.15587/2312-8372.2014.34183

Keywords:

conveyor, parameters, stability, unit, characteristics, algorithm software

Abstract

The article is devoted to development of algorithms and software for research of strengthening possibility of emergency firmness of belt conveyor units. The material of the article is a part of the research of the structures of mine belt conveyors from the point of view of operation safety of units and components of the development requirements for their design. It is formalized one of the stages of mine conveyors designing - research of strengthening possibility of emergency firmness of belt conveyor units. It is developed the visual form of user interface based on the example of the basic parameters of the mine conveyor, which is created in the programming language Delphi. To automate the calculation of these parameters of conveyor used programming language Delphi, developed by the visual forms of the algorithm for calculating the gain traction, strength of belt, traction factor, probability of emergency danger and heat transfer equation.

Author Biography

Николай Александрович Киктев, National University of Life and Environmental Sciences, Heroes of Defense str., 15, Kiev, 03041

Ph.D., assistant

Department of automation and robotic systems

References

  1. Issledovanie konstruktsii shahtnih lentochnyh konveyerov s tochki zreniia bezopasnosti iekspluatatsii uzlov i razrabotka trebovaniy k proektirovaniiu. Otchet po NIR. (1996). Donetsk: Dongiprouglemash, 90.
  2. Osnovnye polozhennia po proektirovaniiu i iekspluatatsii ugol'nyh shaht. (1975). M.: IGD im. A. Skochinskogo, 268.
  3. Ovsiannikov, Yu. A., Korablev, A. A. (1986). Avtomatizatsiia podzemnogo oborudovaniia. M.: Nedra, 287.
  4. Konveyery lentochnye shahtnye. Metodika rascheta. (1980). M.: MUP SSSR, 72.
  5. Opredelenie tiagovyh parametrov podzemnyh lentochnyh konveyerov s primeneniem IeTsVM. (1982). Donetsk: Dongiprouglemash, 54.
  6. Averchenkov, V. I., Davydov, S. V., Dunaev, V. P., Ivchenko, V. N. (2011). Konveyery s podvesnoy lentoy. M.: Flinta, 256.
  7. Kiktev, N. A., Savitskaia, Ya. A., Chichikalo, N. I. (2014). Metodika sistemy otobrazheniia protsessa avtomatizatsii uchastkovogo konveyernogo transporta. Energetika і avtomatika, № 1, 9.
  8. Zhukov, A. D., Smirnova, T. V., Himich, A. O., Eremenko, A. O., Kopylov, N. A. (2013). Raschet parametrov teplovoy obrabotki mineralovatnyh izdeliy s primeneniem. Stroitel'stvo: nauka i obrazovanie, № 1, 1-4.
  9. Maras, M., Jozef, H., Daniela, M. (1997). Application of the method finite elements by numerical modeling stress-strain state in conveyor belts. Acta Montanistica Slovaca, Vol 2, Iss 2, 101-108.
  10. Bhoyar, R. K., Dr. Handa, C. C. (2013). Design Consideration Of Adjustable Height And Radial Belt Conveyor System. International Journal of Engineering Trends and Technology, Vol 4, Iss 10, 4377-4382.

Published

2014-12-23

How to Cite

Киктев, Н. А. (2014). Research algorithm development of strengthening possibility of emergency firmness of belt conveyor units. Technology Audit and Production Reserves, 6(3(20), 48–50. https://doi.org/10.15587/2312-8372.2014.34183

Issue

Section

Information technology and control systems