Research of gas release during crystallization of aluminium and its alloys

Authors

  • Геннадий Николаевич Трегубенко National Metallurgical Academy of Ukraine, av. Gagarina, 4, Dnepropetrovsk, Ukraine, 49600, Ukraine https://orcid.org/0000-0001-5353-9593

DOI:

https://doi.org/10.15587/2312-8372.2015.56631

Keywords:

gas release, hydrogen, gas porosity, crystallization, aluminum, casting, gas bubble

Abstract

The problem of gas porosity formation in the manufacture of aluminum structural or cast porous alloys is discussed and some results of our research in this area are shown in the article. The main aim of the research is to investigate the influence of various technological, physical and chemical factors on the process of hydrogen gas release during crystallization of aluminum and its alloys. Using system simulation allows a scientist to investigate fully the flow of a process. In this paper to simulate the process of hydrogen gas release it was considered the simplest and, therefore, the most discussed in the literature option when the crystallization front moves in an unlimited amount of melt. The presented method allows determining what factors and how affecting the process of hydrogen gas release during production of aluminum castings and its alloys. The research results can be applied by experts in the field of metal technology, metallurgy, foundry, production of aluminum castings for mechanical engineering.

Author Biography

Геннадий Николаевич Трегубенко, National Metallurgical Academy of Ukraine, av. Gagarina, 4, Dnepropetrovsk, Ukraine, 49600

Doctor of Technical Sciences, professor, Senior Research Worker

Department of electrometallurgy

References

  1. Chernega, D. F., Bialik, O. M., Ivanchuk, D. F. (1982). Gazy v tsvetnyh metallah i splavah. Moscow: Metallurgiia, 176.
  2. Nesterenko, T. M., Nesterenko, O. M., Kolobov, H. O., Hrytsai, V. P. (2007). Vyrobnytstvo aliuminiievykh splaviv z rudnoi ta vtorynnoi syrovyny. Kyiv: Vyshcha shkola, 207.
  3. Napalkov, V. I., Mahov, S. V., Bobryshev, B. L., Moiseev, S. M. (2011). Fiziko-himicheskie protsessy rafinirovaniia aliuminiia i ego splavov. Moscow: Teplotehnik, 490.
  4. Simon, R., Kendrick, R., Froscher, A., Evans, P. (2012). Untersuchungen zur entgasung von aluminium schmelzen – einfluss des rotordesigns auf die effektivitat der wasserstoffentfernung. Giesserei Rdsch, Vol. 59, № 7-8, 201–206.
  5. Savchenko, S. V., Plaksin, A. A., Usenko, S. V. (2007). Pervyi v Rossii opyt primeneniia rotornogo Degazatora SNIF®TD 1000 «Pyrotek Inc.» pri rafinirovanii vtorichnyh aliuminievyh splavov. Tsvetnye metally, 4, 117–120.
  6. Afanas'ev, V. K., Afanas'eva, I. N., Popova, M. V. (1998). Vodorod i svoistva splavov aliuminiia s kremniem. Abakan: Hakasskoe izd-vo, 192.
  7. Afanas'ev, V. K., Popova, M. V., Ruzhilo, A. A. et al. (2005). Primenenie vodoroda dlia polucheniia neobhodimyh svoistv aliuminievyh splavov. Materialy mezhdunarodnoi nauchno-tehnicheskoi konferentsii «Vodorodnoe materialovedenie i himiia uglerodnyh nanomaterialov». Kyiv, 243–245.
  8. Kotliarovskii, F. M., Borisov, G. P., Belik, V. I. et al. (2004). Vliianie vodorodnoi obrabotki siluminovyh rasplavov na mehanicheskie svoistva otlivok. Protsessy lit'ia, 2, 56–61.
  9. Shapovalov, V. I. (2013). Legirovanie vodorodom. Dnepropetrovsk: Zhurfond, 385.
  10. Taran, Yu. N., Gubenko, S. I., Bol'shakov, V. I. et al. (2001). Novye materialy. Dnepropetrovsk: NMetAU, Art-Press, 154.
  11. Kotliarovskii, F. M., Borisov, G. P. (2008). O dvoistvennoi roli vodoroda v protsessah formirovaniia otlivok iz aliuminievyh splavov. 50 let Akademii nauk Ukrainy: ILP, IPL, FTIMS. Kyiv: FTIMS NAN Ukrainy, 423–461.
  12. Tregubenko, G. N. (2015). Pereraspredelenie vodoroda mezhdu fazami pri kristallizatsii aliuminiia i ego splavov. Vіsnik NTU «HPІ». Serіia «Mehanіko-tehnologіchnі sistemi ta kompleksi», 49 (1158), 21–26.
  13. Pohodnia, I. K. (1972). Gazy v svarnyh shvah. Moscow: Mashinostroenie, 256.
  14. Prisniakov, V. F. (1988). Kipenie. Kyiv: Naukova dumka, 237.

Downloads

Published

2015-11-26

How to Cite

Трегубенко, Г. Н. (2015). Research of gas release during crystallization of aluminium and its alloys. Technology Audit and Production Reserves, 6(1(26), 22–26. https://doi.org/10.15587/2312-8372.2015.56631

Issue

Vol. 6 No. 1(26) (2015): Mechanical engineering and machine building. Energy, energy-saving technologies and equipment

Section

Mechanical engineering and machine building

License

Copyright (c) 2016 Геннадий Николаевич Трегубенко

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.