Qualification basis research in the «Processes, apparatus and machines of the industry» for mechanical engineers of chemical engineering

Authors

  • Ірина Олександрівна Казак National Technical University of Ukraine «Kyiv Polytechnic Institute», str. Polytechnic, 39, Kyiv, Ukraine, 03056, Ukraine https://orcid.org/0000-0001-9450-8312

DOI:

https://doi.org/10.15587/2312-8372.2016.58532

Keywords:

chemical engineering, process, apparatus, machines of the industry, classification, jobs, application, mechanical engineer

Abstract

The article deals with the problem of special training highly skilled Mechanical Engineers of Chemical Engineering. This problem is caused by the introduction of chemical production in the latest technology and the most modern equipment. In this connection, put forward higher requirements to the specialists of the industry. This article investigated the qualification framework in the quest for the «Process, apparatus and machines of the industry», established especially for the training of the future mechanical engineers in «Mechanical Engineering». The result of this study to address this problem is substantiated and developed a generalized classification of learning activities on the «Process, apparatus and machines of the industry». Established generalized classification of jobs is very important for all selected groups of Mechanical Engineers of Chemical Engineering («technology», «mechanics», «designers»), as it allows not losing sight of those kinds of jobs on the «Processes, apparatus and machines of the industry», which can be useful and important to improve the efficiency of vocational training of these professionals.

Author Biography

Ірина Олександрівна Казак, National Technical University of Ukraine «Kyiv Polytechnic Institute», str. Polytechnic, 39, Kyiv, Ukraine, 03056

Candidate of Pedagogical Sciences, Associate Professor

Department of Chemical, Polymer and Silica Engineering

References

  1. Zubarev, Yu. M. (2011). Modernizatsiia mashinostroeniia zavisit ot urovnia podgotovki spetsialistov. Vysshee obrazovanie segodnia, 5, 5–9.
  2. Kapitonova, K. A., Gurevich, A. I. (2012). The structure of the basic concepts and the content of vocational education in mechanical engineering. Modern scientific researches and innovations, 7. Available: http://web.snauka.ru/issues/2012/07/15824
  3. Miroshnichenko, I. V. (2015). Metodika klassifikatsii statisticheskih izmeritel'nyh zadach pri proektirovanii sistem obrabotki eksperimental'nyh dannyh. Molodyi vchenyi, 4, 11–15.
  4. Havrytska, M. et al. (2010). Klasyfikator profesii DK 003:2010. Kyiv: Sotsinform, Derzhspozhyvstandart Ukrainy, 746.
  5. Kovalenko, E. E., Briuhanova, N. A. (1998). Logicheskie osnovy formirovaniia uchebnogo materiala. Kharkov, 140.
  6. Kazak, I. A. (2011). Scientific Pedagogical Bases of Development of Methodology of Applying Teaching Tasks in the Process Preparations of Training Future Heat-Power Engineers in the Discipline «Heat-Power Stations and Atomic Power Stations and Plants». Problems of Engineering Pedagogic Education, 32-33, 178‑183.
  7. Kazak, I. A. (2014). Professional Responsibilities of Mechanical Engineers in the Chemical Engineering Training Course. Proceedings of the National Technical University of Ukraine «Kyiv Polytechnic Institute». Series «Chemical Engineering, Ecology and Resource Conservation», 2 (13), 13‑17.
  8. Uman, A. I. (1989). Uchebnye zadaniia i protsess obucheniia. Moscow: Pedagogika, 54.
  9. Kovalenko, I. V., Malynovskyi, V. V. (2006). Osnovni protsesy, mashyny ta aparaty khimichnykh vyrobnytstv. Kyiv: Inres, Volia, 261.
  10. Kovalenko, I. V., Malynovskyi, V. V. (2006). Navchalni doslidzhennia protsesiv, mashyn ta aparativ khimichnykh vyrobnytstv. Kyiv: Norita-plius, 160.
  11. Kovalenko, I. V., Malynovskyi, V. V. (2007). Rozrakhunky osnovnykh protsesiv, mashyn ta aparativ khimichnykh vyrobnytstv. Kyiv: Norita-plius, 212.

Downloads

Published

2016-01-21

How to Cite

Казак, І. О. (2016). Qualification basis research in the «Processes, apparatus and machines of the industry» for mechanical engineers of chemical engineering. Technology Audit and Production Reserves, 1(1(27), 7–12. https://doi.org/10.15587/2312-8372.2016.58532

Issue

Vol. 1 No. 1(27) (2016): Mechanical engineering and machine building. Energy, energy-saving technologies and equipment

Section

Mechanical engineering and machine building

License

Copyright (c) 2016 Ірина Олександрівна Казак

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.