Development of the indicator’s system for quality controlling vehicles' processes of maintenance and repair

Authors

DOI:

https://doi.org/10.15587/2312-8372.2016.70207

Keywords:

quality, maintenance and repair of motor vehicles, system of indicators

Abstract

The article deals with the system of indicators developed on the basis of vehicle maintenance and repair for the quality control.

The system of working environment indicators was detected on the basis of the analysis of maintenance and repair processes. On the basis of a linear regression model and researches the dependence for the degree of importance of each indicator calculation is detected.

The analysis found that the proposed system of indicators has properties necessary and sufficient for the assessment of the company for the maintenance and repair of vehicles which include organizational and technical support; production facilities (buildings, structures); technological equipment, accessories; staffing; control and diagnostic, test equipment and means of measurement; regulatory, technical and technological documentation. The parameters of the maintenance and repair of vehicles carry the full amount of information that reflects the requirements of the certification system (or declare). Some of the indicators are found to consist of a number of components. Hence there is a need to describe these indicators by means of their constituents, and then choose the most significant and important for the final result of certification (or declare).

The number of components for assessment of the level of performed work of the company is defined for the first time. After selecting the most important and significant component the system of indicators for the final result of certification or declaration is determined.

In the result of the research the defined indicators make it possible to compare companies with each other, to assess the whole market for the maintenance and repair of vehicles.

Author Biographies

Людмила Анатоліївна Тарандушка, Cherkasy State Technological University, br. Shevchenko, 460, Cherkasy, 18006

Candidate of Technical Sciences, Associate Professor

Department of vehicles and technologies for their exploitation

Світлана Миколаївна Одокієнко, Kyiv National University of Technologies and Design, st. Nemirovich-Danchenko, 2, Kyiv, 01011

Candidate of Technical Sciences, Associate Professor

Department of information and computer technologies and fundamental disciplines

Іван Павлович Тарандушка, Bohdan Khmelnytsky National University of Cherkasy, br. Shevchenko, 81, Cherkasy, 18031

Graduate student

Department of quality certification and standardization 

References

  1. Levkovskyy, A. P., Turitcya, А. А. (2012). Factors and organizational principles of development car repair and car service complexes. Visnyk NTUU «KPI», 26, 583–587.
  2. Systema yakosti vidpovidno do norm mizhnarodnykh standartiv ISO 9000. (2011). Top Lutsk. Available: http://toplutsk.com/articles-article_379.html
  3. Berry, L. L., Seltman, K. D. (2007, May). Building a strong services brand: Lessons from Mayo Clinic. Business Horizons, Vol. 50, № 3, 199–209. doi:10.1016/j.bushor.2007.01.005
  4. Bitner, M. J., Ostrom, A. L., Morgan, F. N. (2008, April). Service Blueprinting: A Practical Technique for Service Innovation. California Management Review, Vol. 50, № 3, 66–94. doi:10.2307/41166446
  5. Stevanovic, I., Stanojevic, D., Nedic, A. (2013). Setting the after sale process and quality control at car dealerships to the purpose of increasing clients satisfaction. Journal of Applied Engineering Science, Vol. 11, № 2, 81–88. doi:10.5937/jaes11-3821
  6. Meuter, M. L., Bitner, M. J., Ostrom, A. L., Brown, S. W. (2005, April). Choosing Among Alternative Service Delivery Modes: An Investigation of Customer Trial of Self-Service Technologies. Journal of Marketing, Vol. 69, № 2, 61–83. doi:10.1509/jmkg.69.2.61.60759
  7. Kalita, P. Ya. (2006). Sistemy kachestva i mezhdunarodnye standarty ISO serii 9000. Kyiv: Ukrainian Association for Quality, 181.
  8. Kyrychenko, L. S., Chernukhina, N. M. (2005). Sertyfikatsiia ta yakist produktsii v suchasnykh umovakh hospodariuvannia. Lviv, 215.
  9. Momot, A. I. (2005). Menedzhment kachestva i elementy sistemy kachestva. Ed. 2. Donetsk: Nord-Press, 320.
  10. Rakhlin, K. M. (2005). Systema menedzhmentu yakosti: pomylky i pomylky. Metody menedzhmentu yakosti, 12, 19–20.

Downloads

Published

2016-05-26

How to Cite

Тарандушка, Л. А., Одокієнко, С. М., & Тарандушка, І. П. (2016). Development of the indicator’s system for quality controlling vehicles’ processes of maintenance and repair. Technology Audit and Production Reserves, 3(2(29), 52–56. https://doi.org/10.15587/2312-8372.2016.70207

Issue

Vol. 3 No. 2(29) (2016): Systems and Control Processes. Technology Transfer in the Transport Industry. Information and Control Systems

Section

Technology Transfer in the Transport Industry

License

Copyright (c) 2016 Людмила Анатоліївна Тарандушка, Світлана Миколаївна Одокієнко, Іван Павлович Тарандушка

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.