Determining quality parameters of alcohol-free functional beverage by the procedure that employs affine transformations

Authors

  • Oksana Zhulinska Kharkiv Institute of Trade and Economics of the Kyiv National University of Trade and Economics, 8, Otakar Jarosha lane, Kharkov, Ukraine, 61000, Ukraine https://orcid.org/0000-0003-3072-4475
  • Karyna Svidlo Kharkiv Institute of Trade and Economics of the Kyiv National University of Trade and Economics, 8, Otakar Jarosha lane, Kharkov, Ukraine, 61000, Ukraine https://orcid.org/0000-0002-0175-7756

DOI:

https://doi.org/10.15587/2312-8372.2017.105631

Keywords:

functional food products, quality and safety control, mean root square deviation

Abstract

The subject of present research is to determine AFB quality indicators according to a procedure that uses affine transformations, which could be applied at any ideal value. The application of this procedure provides FFP with the most accurate quality indicators according to the results of the sample.

We found numerical characteristics of the given set – mathematical expectation, variance, mean root square deviation, third order central moment, fourth order central moment, asymmetry factor, coefficient of excess.

We determined estimates of quality indicators:

1) mass fraction of dry substances – 92.36 %;

2) mass fraction of sediment – 82.65 %;

3) mass fraction of pulp – 91.07 %;

4) mass fraction of titrated acids – 82.93 %;

5) viscosity (dynamic) – 94.20 %;

6) pH – 82.97 %.

It was established that the coefficient of variation  of random magnitudes  and   is less than 0.1. This suggests a slight dispersion of these values. The results obtained allow us to solve a number of practical tasks and are used in the method of control over indicators of quality and safety of alcohol-free beverages with functional purpose.

Implementation of the procedure for quality evaluation using affine transformations provides FFP with the most accurate quality indicators according to the results of the sample. An analysis of this model and comparison with the previous quality assessment could be applied at any ideal value.

Author Biographies

Oksana Zhulinska, Kharkiv Institute of Trade and Economics of the Kyiv National University of Trade and Economics, 8, Otakar Jarosha lane, Kharkov, Ukraine, 61000

Senior Lecturer

Department of Food Technology, Hotel and Restaurant Business

Karyna Svidlo, Kharkiv Institute of Trade and Economics of the Kyiv National University of Trade and Economics, 8, Otakar Jarosha lane, Kharkov, Ukraine, 61000

Doctor of Technical Sciences, Professor

Department of Food Technology, Hotel and Restaurant Business

References

  1. Pro bezpechnist ta yakist kharchovykh produktiv. Law of Ukraine from 28.12.2014 67-VIII. Available: http://zakon3.rada.gov.ua/laws/show/67-19
  2. Zhulinska, O., Svidlo, K. (2017). Assessment of the quality and safety of functional food products using mathematical models. Technical sciences and technologies, 1 (7), 217–225.
  3. Harrington, E. (1963). Calculation of the general izedindex of metallic primitives. Chemical Engineering Journal, 59, 132–147.
  4. Boitsov, B. V., Krianev, Yu. V., Kuznetsov, N. A. (1997). Kachestvo: printsipy, upravlenie. Moscow: MAI, 250.
  5. Kruglov, M. I. (1976). Sistemnyi analiz v standartizatsii i upravlenii kachestvom produktsii. Nauchnye trudy VNIIS, 29, 3–34.
  6. Nevskaya, K. A., Kutsyna, I. V. (2012). The Soviet Control Systems of Quality. Materialy konferentsii «Upravlenie kachestvom v obrazovanii, proizvodstvennyh sistemah i sfere uslug». Available: http://econf.rae.ru/article/6932
  7. Glichev, A. V., Kruglov, A. V., Kryzhanovskii, I. D. (1979). Upravlenie kachestvom produktsii: opyt, problemy, perspektivy. Moscow: Ekonomika, 175.
  8. Sivachenka, I. Yu. (2003). Upravlinnia mizhnarodnoiu konkurentospromozhnistiu pidpryiemstva. Kyiv: TsUL, 186.
  9. Katrych, O. O. (2015). Rozvytok kvalimetrychnykh metodiv otsiniuvannia protsesiv system upravlinnia yakistiu pidpryiemstv vidpovidno do vymoh mizhnarodnykh standartiv. Kharkiv, 169.
  10. Trishch, R. M., Slitiuk, E. A. (2006). Obobshchionnaia tochechnaia i interval'naia otsenki kachestva izgotovleniia detali DVS. Eastern-European Journal of Enterprise Technologies, 1, 63–67.
  11. Trishch, R. M., Slitiuk, E. A. (2006). Tochechnaia i interval'naia otsenki kachestva izdelii. Bulletin of the National Technical University «KhPI» Series: New solutions in modern technologies, 27, 96–102.
  12. Trishch, H. M. (2014). Rozrobka metodolohii otsiniuvannia protsesiv system upravlinnia yakistiu pidpryiemstv z urakhuvanniam vymoh mizhnarodnykh standartiv. Lviv, 162.
  13. Gumbel, E. (1965). Statistika ekstremal'nyh znachenii. Moscow: Mir, 450.
  14. Evlanov, L. G., Kutuzov, V. A. (1978). Ekspertnye otsenki v upravlenii. Moscow: Ekonomika, 129.
  15. Kannala, J., Rahtu, E., Heikkilä, J., Salo, M. (2005). A New Method for Affine Registration of Images and Point Sets. Lecture Notes in Computer Science, 224–234. doi:10.1007/11499145_25
  16. Heikkila, J. (2004). Pattern matching with affine moment descriptors. Pattern Recognition, 37 (9), 1825–1834. doi:10.1016/j.patcog.2004.03.005
  17. Deineka, I., Riabchykov, O. (2013). Rational design modelling methods of complex surface work piece creation. Teka Commision of Motorization and Energetics in Agriculture, 13 (4), 59–68.

Published

2017-05-30

How to Cite

Zhulinska, O., & Svidlo, K. (2017). Determining quality parameters of alcohol-free functional beverage by the procedure that employs affine transformations. Technology Audit and Production Reserves, 3(3(35), 49–55. https://doi.org/10.15587/2312-8372.2017.105631

Issue

Section

Food Production Technology: Original Research