Optimization of the placement of reactive power sources in the electric grid based on modeling of its ideal modes

Authors

DOI:

https://doi.org/10.15587/2312-8372.2018.129237

Keywords:

electric grid, «ideal» mode, flow of reactive energy, multi-purpose optimization, reactive power source

Abstract

The work is devoted to solving the problem of optimizing the flow of reactive energy in electric grids (EG) of electric supply companies (EC). The object of research is the process of transportation and distribution of electric power by electric grids of UES. The subject of the research is methods and means for optimizing the flow of reactive energy in such grids. One of the most problematic locations for the EG operation is ensuring their energy efficiency in the face of constant changes in consumption and generation of electricity. It is known that the most effective measure to reduce power losses in the EG is the introduction of measures to optimize the flow of reactive energy. However, in order to optimize the location of additional reactive power sources (RPS), it is necessary to solve the problems of non-linear multifactor optimization, which is associated with a number of problems.

On the basis of the research it is shown that to optimize the RPS location it is expedient to use the results of modeling «ideal» EG modes for reactive power based on equivalent circuits with active supports. The economic costs associated with the installation and operation of the RPS, it is suggested to list the EG equivalent circuit in the corresponding economic supports. Mathematical relations for economic resistance of established RPSs are developed, as well as the optimization task to be determined based on the results of the solution.

Application of this approach, unlike classical methods, significantly shortens the calculation time and allows obtaining a solution close to the global minimum of production costs. The computational efficiency and reliability of the approach is ensured by the construction of the task of multifactorial optimization of the flow of reactive energy in the design setting in the iterative calculation of the «ideal» EG mode according to the appropriate equivalent circuit and loads.

The program implementation allows to confirm the effectiveness of the proposed approach for a number of practical problems. It is shown that the solutions obtained for optimizing the RPS distribution in grids bring the profitability of investments to a global maximum closer, regardless of the size of the problem and a list of constraints on the parameters.

Author Biographies

Volodymyr Kulyk, Vinnytsia National Technical University, 95, Khmelnytske shose, Vinnytsia, Ukraine, 21021

Doctor of Technical Sciences, Associate Professor

Department of Electric Stations and Systems

Oleksandr Burykin, Vinnytsia National Technical University, 95 Khmelnytske shose, Vinnytsia, Ukraine, 21021

PhD, Associate Professor

Department of Electric Stations and Systems

Viktor Pirnyak, Separate Subdivision «State Energy Supervision in the Southwest Region» of SE «NEC «Ukrenergo», 5, Ivana Bogyna str., Vinnytsya, Ukraine, 21100

Deputy Head of Inspection of State Energy Supervision in Vinnytsia region

References

  1. Stohnii, B. S., Kyrylenko, O. V., Denysiuk, S. P. (2015). Intelektualni elektrychni merezhi elektroenerhetychnykh system ta yikh tekhnolohichne zabezpechennia. Tekhnichna elektrodynamika, 6, 44–50.
  2. Electric Power Research Institute Tech. Rep. The Smart Grid Interoperability Standards Roadmap. (2009, August). Available at: https://www.nist.gov/sites/default/files/documents/smartgrid/Report_to_NIST_August10_2.pdf
  3. Lezhniuk, P. D., Kulyk, V. V., Netrebskyi, V. V., Teptia, V. V. (2014). Pryntsyp naimenshoi dii v elektrotekhnitsi ta elektroenerhetytsi. Vinnytsia: UNIVERSUM-Vinnytsia, 212.
  4. Kulyk, V. V., Hrytsiuk, I. V., Hrytsiuk, Yu. V. (2013). Optymalne keruvannia potokamy reaktyvnoi potuzhnosti v rozpodilnykh elektromerezhakh z rozoseredzhenym heneruvanniam. Pratsi Instytutu elektrodynamiky NANU. Zbirnyk naukovykh prats. Spetsialnyi vypusk, 151–158.
  5. Hinz, F., Moest, D. (2018). Techno-economic Evaluation of 110 kV Grid Reactive Power Support for the Transmission Grid. IEEE Transactions on Power Systems. doi:10.1109/tpwrs.2018.2816899
  6. Becker, W., Hable, M., Malsch, M., Stieger, T., Sommerwerk, F. (2017). Reactive power management by distribution system operators concept and experience. CIRED – Open Access Proceedings Journal, 2017 (1), 2509–2512. doi:10.1049/oap-cired.2017.0347
  7. Zecchino, A., Marinelli, M., Traeholt, C., Korpas, M. (2017). Guidelines for distribution system operators on reactive power provision by electric vehicles in low-voltage grids. CIRED – Open Access Proceedings Journal, 2017 (1), 1787–1791. doi:10.1049/oap-cired.2017.0377
  8. Kaloudas, C., Shaw, R. (2017). Long-term forecasting of reactive power demand in distribution networks. CIRED – Open Access Proceedings Journal, 2017 (1), 2406–2410. doi:10.1049/oap-cired.2017.0182
  9. Zhelezko, Yu. S. (1981). Kompensatsiya reaktivnoy moshhnosti v slozhnykh elektricheskikh sistemakh. Moscow: Energoizdat, 200.
  10. Narayan, S. R. (2003). Solved Nonlinear Optimization Problems. Optimization Principles: Practical Applications to the Operation and Markets of the Electric Power Industry. Wiley-IEEE Press, 245–295. doi:10.1109/9780470545454.ch8
  11. Lezhniuk, P. D., Demov, O. D., Pivniuk, Yu. Yu. (2015). Poetapnyi rozrakhunok kompensatsii reaktyvnoi potuzhnosti v rozpodilnykh elektrychnykh merezhakh iz vykorystanniam vidnosnykh spadiv napruhy. Visnyk Pryazovskoho derzhavnoho tekhnichnoho universytetu. Seriia: Tekhnichni nauky, 2 (30), 108–115.
  12. Zhu, J. (2009). Reactive Power Optimization. Optimization of Power System Operation. Wiley-IEEE Press, 409–454. doi:10.1002/9780470466971.ch10
  13. Singh, P., Purey, P., Titare, L. S., Choube, S. C. (2017). Optimal reactive power dispatch for enhancement of static voltage stability using jaya algorithm. 2017 International Conference on Information, Communication, Instrumentation and Control (ICICIC). Indore. doi:10.1109/icomicon.2017.8279044
  14. Wong, K. P., Li, A., Law, T. M. Y. (1999). Advanced, constrained, genetic algorithm load flow method. IEE Proceedings – Generation, Transmission and Distribution, 146 (6), 609–678. doi:10.1049/ip-gtd:19990638
  15. Yin, S., Wu, L., Song, W., Wang, X. (2017). Multi-objective reactive power optimisation approach for the isolated grid of new energy clusters connected to VSC-HVDC. The Journal of Engineering, 2017 (13), 1024–1028. doi:10.1049/joe.2017.0484
  16. Kholmskiy, V. G. (1965). Optimizatsiya potokoraspredeleniya v zamknutykh elektricheskikh setyakh s vysokoy stepen'yu neodnorodnosti. Elektrichestvo, 9, 16–21.
  17. Venikov, V. A. (1973). Elektricheskie sistemy: elektricheskie raschety, programmirovanie i optimizatsiya rezhimov. Moscow: Vysshaya shkola, 320.

Published

2017-12-28

How to Cite

Kulyk, V., Burykin, O., & Pirnyak, V. (2017). Optimization of the placement of reactive power sources in the electric grid based on modeling of its ideal modes. Technology Audit and Production Reserves, 2(1(40), 59–65. https://doi.org/10.15587/2312-8372.2018.129237

Issue

Section

Technology and System of Power Supply: Original Research