Construction of homogeneous solutions in the torsion problem for a transversally isotropic sphere with variable elastic moduli

Authors

DOI:

https://doi.org/10.15587/2706-5448.2022.263238

Keywords:

torsion problem, elastic moduli, Legendre equations, penetrating solutions, boundary layer solutions, torque

Abstract

The object of research is the problem of torsion for a radially inhomogeneous transversally isotropic sphere and the study based on this three-dimensional stress-strain state.

To establish the scope of applicability of existing applied theories and to create more refined applied theories of inhomogeneous shells, it is important to study the stress-strain state of inhomogeneous bodies based on three-dimensional equations of elasticity theory.

The problem of torsion of a radially inhomogeneous transversally isotropic non-closed sphere containing none of the poles 0 and π is considered. It is believed that the elastic moduli are linear functions of the radius of the sphere. It is assumed that the lateral surface of the sphere is free from stresses, and arbitrary stresses are given on the conic sections, leaving the sphere in equilibrium.

The formulated boundary value problem is reduced to a spectral problem. After fulfilling the homogeneous boundary conditions specified on the side surfaces of the sphere, a characteristic equation is obtained with respect to the spectral parameter. The corresponding solutions are constructed depending on the roots of the characteristic equation. It is shown that the solution corresponding to the first group of roots is penetrating, and the stress state determined by this solution is equivalent to the torques of the stresses acting in an arbitrary section θ=const. The solutions corresponding to the countable set of the second group of roots have the character of a boundary layer localized in conic slices. In the case of significant anisotropy, some boundary layer solutions decay weakly and can cover the entire region occupied by the sphere.

On the basis of the performed three-dimensional analysis, new classes of solutions (solutions having the character of a boundary layer) are obtained, which are absent in applied theories. In contrast to an isotropic radially inhomogeneous sphere, for a transversely isotropic radially inhomogeneous sphere, a weakly damped boundary layer solution appears, which can penetrate deep far from the conical sections and change the picture of the stress-strain state.

Author Biography

Sevinc Yusubova, Lyceum named after Heydar Aliyev

Lecturer

References

  1. Birman, V., Byrd, L. W. (2007). Modeling and analysis of functionally graded materials and structures. Applied Mechanics Reviews, 60 (5), 195–215. doi: http://doi.org/10.1115/1.2777164
  2. Tokovyy, Y., Ma, C. C. (2019). Elastic analysis of inhomogeneous solids:history and development in brief. Journal of Mechanics, 35 (5), 613–626. doi: http://doi.org/10.1017/jmech.2018.57
  3. Love, A. E. (1927). A treatise on the mathematical theory of elasticity. Cambridge: Cambridge University Press.
  4. Galerkin, B. G. (1942). Ravnovesie uprugoi sfericheskoi obolochki. Prikladnaia matematika i mekhanika, 6 (6), 487–496.
  5. Lure, A. I. (1942). Ravnovesie uprugoi simmetrichno nagruzhennoi sfericheskoi obolochki. Prikladnaia matematika i mekhanika, 7 (6), 393–404.
  6. Vilenskaia, T. V., Vorovich, I. I. (1966). Asimptoticheskoe povedenie resheniia zadachi teorii uprugosti dlia sfericheskoi obolochki maloi tolshchiny. Prikladnaia matematika i mekhanika, 30 (2), 278–295.
  7. Mekhtiyev, M. F. (2019). Asymptotic analysis of spatial problems in elasticity. Advanced Structured Materials. Springer. doi: http://doi.org/10.1007/978-981-13-3062-9
  8. Boev, N. V., Ustinov, Iu. A. (1985). Prostranstvennoe napriazhenno-deformirovannoe sostoianie trekhsloinoi sfericheskoi obolochki. Izv. AN SSSR. Mekhanika tverdogo tela, 3, 136–143.
  9. Akhmedov, N. K., Ustinov, Y. A. (2009). Analysis of the structure of the boundary layer in the problem of the torsion of a laminated spherical shell. Journal of Applied Mathematics and Mechanics, 73 (3), 296–303. doi: http://doi.org/10.1016/j.jappmathmech.2009.07.010
  10. Ootao, Y., Ishihara, M. (2011). Transient Thermal Stress Problem of a Functionally Graded Magneto-Electro-Thermoelastic Hollow Sphere. Materials, 4 (12), 2136–2150. doi: http://doi.org/10.3390/ma4122136
  11. Poultangari, R., Jabbari, M., Eslami, M. R. (2008). Functionally graded hollow spheres under non-axisymmetric thermo-mechanical loads. International Journal of Pressure Vessels and Piping, 85 (5), 295–305. doi: http://doi.org/10.1016/j.ijpvp.2008.01.002
  12. Eslami, M. R., Babaei, M. H., Poultangari, R. (2005). Thermal and mechanical stresses in a functionally graded thick sphere. International Journal of Pressure Vessels and Piping, 82 (7), 522–527. doi: http://doi.org/10.1016/j.ijpvp.2005.01.002
  13. Grigorenko, A. Y., Yaremchenko, N. P., Yaremchenko, S. N. (2018). Analysis of the Axisymmetric Stress–Strain State of a Continuously Inhomogeneous Hollow Sphere. International Applied Mechanics, 54 (5), 577–583. doi: http://doi.org/10.1007/s10778-018-0911-1
  14. Akhmedov, N. K., Sofiyev, A. H. (2019). Asymptotic analysis of three-dimensional problem of elasticity theory for radially inhomogeneous transversally-isotropic thin hollow spheres. Thin-Walled Structures, 139, 232–241. doi: http://doi.org/10.1016/j.tws.2019.03.022
  15. Akhmedov, N. K., Gasanova, N. S. (2020). Asymptotic behavior of the solution of an axisymmetric problem of elasticity theory for a sphere with variable elasticity modules. Mathematics and Mechanics of Solids, 25 (12), 2231–2251. doi: http://doi.org/10.1177/1081286520932363
  16. Akhmedov, N. K., Yusubova, S. M. (2022). Investigation of elasticity problem for the radially inhomogeneous transversely isotropic sphere. Mathematical methods in the applied sciences. doi: http://doi.org/10.1002/mma.8360
  17. Lur’e, A. I. (2005). Theory of Elasticity. Berlin: Springer.

Downloads

Published

2022-08-26

How to Cite

Yusubova, S. (2022). Construction of homogeneous solutions in the torsion problem for a transversally isotropic sphere with variable elastic moduli. Technology Audit and Production Reserves, 4(1(66), 15–20. https://doi.org/10.15587/2706-5448.2022.263238

Issue

Vol. 4 No. 1(66) (2022): Industrial and technology systems

Section

Mechanics: Reports on Research Projects

License

Copyright (c) 2022 Sevinc Yusubova

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.